|
|
TN, STN, FSTN Technologies
For segmented or alphanumeric / graphic displays; TN with colour segments and background other than B/W ;CSTN, TFT technologies
For graphic displays up to 5'' diagonal size
|
|
LCD hand held terminal to the coordination and supervision of the overload warning of the row VKS-005x. It makes the representation of the measurements of the two channels a VKS-005x possible.
The terminal is connected to the VKS-005x about RS232 port. The power supply gets it of the overload warning device. It is suitable using in new constructions particularly for the first application of the sensors.
|
|
LED strip indicator 584
The "semi-analog" LED strip indicator displays the measured value using 71 LEDs. This indicator is designed to withstand very stong vibrations yet has the familiar look of an analog indicator.
The two standard housing sizes and flexible inputs make the indicator a universal solution for all applications with increased vibrations.
Developed for large diesel engines, the indicator can be used directly on ships' engines (GL-approved models are available) and on any machine or system where high vibration resistance is required.
Ships' engines
Large engines
Pavement cutters
General road construction machinery
Turbines
Shredders
Rock crushers
Strainers
Features:
LED indicator (71 LEDs + 1 power ON)
1.5% accuracy
Display on 320° arc
Sturdy metal housing
Special design for strong vibrations
100mm or 96x96mm with changing scale
Inputs: Voltage input 0-10V
Current inputs: 0-20 / 4-20 mA
Frequency input: 0-10 Hz / 0-20kHz (PNP/NPN)
Sine wave input (e.g. for inductive sensors)
Fine tuning of +/- 10% possible
Options:
Acceptance from shipping certification agencies available on request.
|
|
- We have 3.5" and 5.7" TFT LCD Module for Industry application
- Display Mode: Color TFT
- Pixels: 320(RGB)x240
- White LED Backlight, Digital interface
- Outline Dimension (mm): 126.08x101.54x4.74mm ---5.7"
76.9 x 63.9x3.2mm ----3.5"
- We also have optional control board for MCU interface directly and Touch panel for your choice.
|
|
COMPACT ELECTRONIC DISPLAY UNIT
Quick Read family is made up of three slim, compact versions, each complete with analog and digital displays, and easily programmed via local keypad.
The 3-colour (green, yellow and red) analog display and 8-digit alphanumeric display provide clear definition and easy reading of the measurement results.
|
|
3 Axis
All-in-one multi-functions DRO for lathe, milling and grinding machines.
SW4000-3 with RS232 Port so you can connect it to your PC!
Easy to use! And so convenient!!
Functions of SW4000:
1. MM/Inch conversion.
2. Coordinate zero setting.
3. ABS/ INC conversion
4. Diameter/ Radius selection.
5. ½ to locate work piece center.
6. Scientific calculator.
7. 999 Sub-datumn memory.
8. Set direction of linear scale.
9. RI detection: set and recall datum for machining.
10. Linear error compensation.
11. Resolution selection: 0.001 , 0.005 , 0.010 mm
12. Power failure memory.
Milling Function: Bolt Circle machining, R-angle machining, Divide holes on an oblique line, Machining on an oblique line.
Lathe Function: Radius/Diameter, X + Y (2-axis DRO).
Grinding Function: Filtering (makes it easier to read the display).
DRO Specification:
1. Input voltage: AC 90V - 240V.
2. Auto-selecting power supply.
3. Dimension: 295mm x 185mm x 45mm.
4. Linear scale signals: TTL square wave.
5. Display: LED.
6. RS232 Port.
|
|
CA 306 and PB 306: Simple preset units with front thumbwheel switches, for easy remote setting of single parameters (i.e. setspeed of a drive) via fieldbus. By pressing the ENTER button, the actual BCD setting will be transmitted to the selected register of the target unit as PDO or SDO (CANBUS) or hold in the polling register for readout (PROFIBUS)
Front dimensions 96x48 mm
CA 340 and PB 340: Simple indicators unit for remote display of all register data which are available on the network. The use of this display can provide operator information about any of actual process data or parameter settings, at any place around the machine. The CAN version is able to handle PDO objects as well as SDO objects.
Front dimensions 96x48 mm
Bright 6 decade LED display with 15 mm size
CA 541 and PB 541: This unit combines both, preset switch and indicator. Whilst the BCD switch allows to make register changes via fieldbus, the LED display provides information about the actual setting of the same or any other register.
Front dimensions 96x72 mm
Bright 6 decade LED display with 15 mm size
|
|
When size matter ! Discover the economical new range of Red Lion Large Displays : the LD series, to visualize your main production datas from a distance.
LD
Large Display Counter and Rate Indicator
- 2.25" & 4" High Red LED Digits
- Available in 4 or 6 Digit Versions
- Single or Dual Counter with Rate Indicator
- Programmable Scaling and Decimal Points
- Programmable User Input
- AC or DC Powered
- 5 AMP Form C Relay
- Aluminum NEMA 4X Case Construction
LDT
Large Display Timer and Cycle Counter
- 2.25" or 4" High Red LED Digits
- 6-Digit Bi-directional Timing Capability
- 5-Digit Cycle Counting Capability
- Selectable Timer Ranges and Operating Modes
- Elapsed Timer and Preset Timer Functionality
- Serial Communications (Selectable RS232 or RS485)
- Programmable User Input
- AC or DC Powered
- 5 AMP Form C Relay Output
- Aluminum NEMA 4X Case Construction item
LDA
Large DC Volt/Current/Process Display
- 2.25" & 4" High Red LED Digits
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 Amp Form C Relay
-Aluminum NEMA 4X Case Construction
-RS232/RS485 Serial Communications
- Universally Powered
LDSS
Large Serial Slave Display
- 2.25" or 4" High Red LED Digits
- Displays up to 6 Digits of Serial ASCII Data
- Dual Display Buffer Allows Alternating Displays
- Selectable RS232 or RS485 Serial Interface
- Connects Directly to Red Lion Products with Serial
- Programmable User Input
- AC or DC Powered
- Aluminum NEMA 4X/IP65 Case Construction
|
|
PAN3V
Format DIN 48x48
The PAN3V is a small economic panel especially studied for the starting cupboards or the electric control panels.
It makes it possible to announce :
- 3 gathered information.
- "Start, stop, default".
- "presence of the 3 three-phase tensions" of an electric departure.
Supply :
- Low voltage (12Vac/dc, 24Vac/dc, 48Vac/dc).
- Hight voltage (130Vdc, 220Vac, 380Vac).
Equipped with 3 removable indicators LED "high luminosity" (possible colors: green, yellow, red, blue, white), of its connector scewless removable, its test lamp optional outside, it is very easy to install and will save to you an precious time.
Option :
Lamp test output.
|
|
DF30 is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
Looking for a way to trim cost and save space? Check out Red Lion's CUB5 Panel Meters. The meters are less expensive and less than half the size of most standard 1/8 DIN panel meters. Less panel space and the ability to utilize smaller enclosures make these meters the perfect solution for any budget.
Don't let the size fool you...these meters are packed full of features! The large .48" (12 mm) display, optional single or dual set point control output modules, and optional RS232 or RS485 communication modules allow these meters to handle even the most demanding applications.
CUB5 Counter/Rate Indicator
CUB5I DC Current Meter
CUB5P Process Meter
CUB5RT RTD Meter
CUB5T Preset Timer and Cycle Counter
CUB5TC Thermocouple Meter
CUB5V DC Voltmeter
Optional cards:
- CUR5RLY (1 relay output module)
- CUR5SNK (module 2 NPN transistors - only for analog models)
- CUB5COM1 (communication RS485)
- CUB5COM2 (commnunication RS232)
|
|
Bright LED display with 15 mm size
Master- and Slave operation with Baud rates up to 1 MHz
Easy to set up by two front keys and menu dialogue
Programmable scaling of display and free zero definition
Programmable bit blanking, round-loop mode and more
Aux. 24 V output for encoder supply
Standard housing 96x48x150 mm
115/230 VAC or 17-30 VDC power supply in one unit
|
|
|
The 16-channel thermocouple monitor designed to read, scan, print and log temperatures or voltages. You can use any one of seven standard thermocouple types to read temperatures from -200 °C to +1700 °C. For remote monitoring applications, the SR630 can time-stamp and store up to 2000 readings in non-volatile memory for later analysis.
|
|
|
ADOS manufactures a wide range of weight serial repeaters that allow to find the best solution for all different industrial environments. Versions with current or voltage analog input are also available.
|
|
|
Simpson offers a wide range of reliable and durable analog panel meters to fulfill your application requirements. Our analog products are offered in a variety of sizes and styles.
|
|
A complete system consists of one or more Linear Encoders, commonly referred to as scales, and a Digital Readout.
The Linear Encoder monitors the machine travel and the Digital Readout (DRO) displays the distance moved or machine table position to the operator.
The axis display is large and clear and the keyboard is designed to be easy to use.
Many functions can be taken off the keyboard to support
the work at the machine.
Depending on application you can choose between
different versions of the readout.
|
|
A very powerful micro-controller manages and processes all the information [position, calculation, etc.] trasmitted by the transducers or entered by the user. Having such a highly evolved but user-friendly digital Readout means increasing the production performance of the machine on which it is installed considerably.
|
|
High Accuracy Lathe Packages
Fits Most Popular Lathes Up To 80
* Uncompromising accuracy and repeatablity X-axis display resolutions to 0.00002"
* Fits most popular lathes up to 80" between centers
* Display includes 9 tool offsets for increased productivity
* Optionally, a third scale can be installed on the compound for Z1 or Z2 measurements
* All brackets and hardware included for quick, easy installation
* Display: LH52-3 Scales: GB-A and SJ700
|
|
LEDI POOL DISPLAYS
Time + temperature zone display for swimming pool
The LEDI®POOL displays the temperature of the water for one or two baths and gives alternatively the time/air temperature information.
The LEDI®POOL can be installed in main entrance or in the swimming zone.
Complies to EMC Directive 98/366 EEC including directive 93/68. EN 55024, EN 55022, EN 60950
|
|
LEDICOM range: Electronic message displays
Works under a Web browser, no need of software installation. The display has it own IP address.
The LEDICOM series declines in 3 models:
- Model 4LTE : 4 lines of text + LCD 12” screen displays pictures and digital video transmission Loudspeaker included
- Model 4LTH : 4 lines of text + LEDI 4/60 clock blue & yellow LED lamps.
- Model 8LT : 8 lines of text
Text in VFGD technology, blue colour
Electronic message display to be directly put on a support, to be embeded or to be put on its (optional) stele. The case consists of a cube in elm and an aluminum box. Securit glass front.
|
|
ANKA® Display systems
ANKA® displays by Wöhrle are your indispensable aid to communications. They provide information, help, warnings and support. Several language levels within one device mean that your information system is international.
The display systems are easily coupled to the PLC or PC either serially, or via fieldbus. We supply drivers for a large number of control systems with every display unit.
They are particularly cost-effective in that up to 250 subsidiary displays can be operated from one display unit. It is also possible to form terminal systems. And up to 15 groups each with up to 15 large displays can be controlled from one serial port. So there is no limit to the opportunities for combination.
ANKA® text display units
ANKA® text display units by Wöhrle are used to increase the availability of automatic processes. The choice of equipment is huge. From straightforward text monitors to the most advanced systems. Display unit designs range from 2 x 20 characters to 4 x 40 characters.
ANKA® text display units with keyboard also enable reactions from the operator to be entered, as well as event reporting.
|
|
|
|
