|
|
|
VCC LED's Through Hole 3mm, 5mm, 10mm LED's. Available in Multi Color, Narrow and wide viewing angles. Ultra high bright output for daylight use. VCC LED's are designed around our Panel Mounting hardware making design options a quick easy soultion for indicator panel mounting.
|
|
|
CABLE ASSEMBLIES, CONNECTIONS FOR LEDs, FANS, SWITCHES, ETC.
|
|
|
|
|
|
These stock assemblies are known as aLEDs®. These aLEDs consist of high power LEDs mounted onto a thermally optimised PCB substrate complete with a connector or solder pads.
Various aLED® assemblies have been created in strip, round cluster, tile and hexagonal format to suit many illumination applications. Some aLED® assemblies come complete with on-board drive electronics for simple DC voltage input.
The use of high power LEDs demands a more rigorous design and manufacturing approach than conventional through hole devices. It has been important to consider the thermal design to guarantee long term reliability and ensure that the LED is not operating above its maximum junction temperature. The aLED® range has been designed to achieve optimum thermal performance which results in maximum light output.
Through the Visible Solutions division of Forge Europa, it is possible to offer custom designed versions of the aLED® product range as well as a comprehensive design and assembly service from prototypes through to volume production.
|
|
|
|
|
|
FEATURES
- Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators.
- Accommodates round and rectangular shapes of LEDs with or without flanges.
- Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs.
- Mount forms LED leads which are locked into position by retaining tabs.
- Formed LED leads are staggered in their length permitting easier PCB insertion.
- Molded standoffs permit the easy cleaning of PCB after wave solding operation.
SPECIFICATIONS
MATERIALS: Housing - Thermoplastic (black) U.L. 94 V0.
MOUNTING: PCH 175 - Right angle thru-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature.
When banded together with the PCH 175 the LEDs are on .250" centers.
LED: 5mm size - round or rectangular shape with or without flange. Bi-lead, standard .100" lead spacing. Tri-lead, either .050" or .100" lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another.
|
|
|
|
|
|
Following its acquisition of the US based LEDCO division of Wilbrecht Electronics, Inc., Microprecision is introducing the popular series of chrome panel mount indicator lights to the European market. Made with a tough reflective, nickel-plated brass housing for 3mm and 5mm LEDs, the indicator lights are ideal for control panels, instrumentation and front panel fault indicators that are exposed to harsh environmental conditions. Equipped with a nitrile gasket/washer and sealed to IP66, the chrome LEDs are suitable for water-tight and high vibration applications.
The rugged panel mount LEDs are available with daylight readable single colours, bicolour, tricolour, and blinking. The products are available with bare pins or wire leads which can be customized with a wide selection of connectors for fast installation in your application. Options include internal resistors for 5-60VDC and 120VAC, black matte housing finish, custom lead lengths and wire types, including avionics grade solution.
For more information please visit our news section on www.microprecision.ch .
|
|
|
|
|
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials)
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
SMT LEDs
A comprehensive range of surface mount LEDs is also available in 0603, 0805, 1204, 1206, PLCC-2 and PLCC-4 versions.
The complete visible spectrum of colours can be supplied, as well as bi-colour and tri-colour versions.
Applications include background illumination, backlighting, status indication, audio equipment and automotive dashboard displays.
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED
|
|
|
|
|
|
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting
|
|
Forge Europa offers an extensive range of high performance solid state LED lamps available in a variety of different package diameters, colours and profiles.
LED lamps incorporating high performance die ensure that even the most demanding application requirements can be satisfied including traffic signal, variable message sign (VMS), video wall and accent lighting projects
|
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
|
|
Avago Technologies is one of the largest producers of visible LEDs in the world and ships billions of products annually. Known for its LEDs%u2019 performance, efficiency and reliability, Avago offers an extensive portfolio of products at globally competitive prices. From a discrete LEDs supplier, Avago has emerged to offer total solutions for illumination and lighting applications. Key products include high brightness and high power LEDs, PLCC surface-mount LEDs, and display backlighting module solutions. These LEDs and display modules address a wide range of markets, including electronic signs and signals, automotive, solid state lighting and LCD display backlighting.
Types of Led
- Auto Focus Auxiliary Flash LED
- ChipLEDs for Automotive
- High Brightness Through Hole Lamps
- High Power LEDs
- Moonstone® High Power LEDs
- Standard Brightness Through Hole Lamps
- Subminiature Lamps
- Surface Mount ChipLEDs
- Surface Mount PLCC LEDs
- Surface Top Mount Mono Color ChipLEDs
|
|
Features:
- T-3/4 (2mm) Surface Mount Package
- Tape & Reel option (See Tape & Reel Specifications)
- Lead Form Options: Gullwing, Yoke, Z-Bend
- Narrow Emission Angle, 24°
- Wavelength = 940 nm, GaAs
- Clear Water Lens
- Matched Photosensor: QSB363
-High Radiant Intensity
|
|
|
Light emitting diodes (LEDs) are opto-semiconductors that convert electrical power into light energy. Compared to semiconductor lasers (laser diodes or LD), LEDs offer advantages such as lower cost and longer service life. We offer a wide range of LEDs that enhance emission efficiency via a high output power LED chip mounted in a reflector (mirror) at the package base. Our LEDs have peak emission wavelengths that range from 660 nm to 940 nm and 1300 nm to 1650 nm, for applications such as camera auto focus and optical fiber communications.
|
|
|
Toshiba is one of the leading suppliers in the visible LED market. Its LED product lines provide high light emitting intensity in various colors and packages. Toshiba is among the first to introduce InGaAlP technology, which provides significant improvement in luminous intensity. Toshiba also introduced new visible LEDs based on the combination of ultraviolet (UV) LED and phosphor technology. This UV based LED allows unique colors to be generated and minimizes color shifts. And with its new lines of high brightness and high flux white LEDs, the Toshiba LEDs offerings can satisfy today's as well as the future's lighting requirements.
|
|
|
We have various products based on developed blue LED technology. There are various kinds of products such as newly-developed products, LED chips, lamps and Navi Tower in order to meet various demands.
|
|
Features
- 1.0mmX0.5mm SMT LED, 0.5mm THICKNESS.
- LOW POWER CONSUMPTION.
- WIDE VIEWING ANGLE.
- IDEAL FOR BACKLIGHT AND INDICATOR.
- VARIOUS COLORS AND LENS TYPES AVAILABLE.
- PACKAGE: 2000PCS / REEL .
- MOISTURE SENSITIVITY LEVEL : LEVEL 3.
- RoHS COMPLIANT.
Description
The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode.
|
|
Discrete LED's / White
Description: White LED , Available in 3mm and 5mm, see individual datasheets for more detailed information on each product.
|
|
|
Light emitting diodes (LEDs) are opto-semiconductors that convert electric energy into light energy. Compared to laser diodes (LDs), LEDs offer advantages such as lower cost and longer service life. HAMAMATSU provides high output power LED ideal for optical switches, encoders, surveying and optical communication.
|
|
Features
- LOW POWER CONSUMPTION.
- SUITABLE FOR AUDIO PANEL INDICATOR.
- FIT 2mm HOLE IN PANELS.
- LONG LIFE-SOLID STATE RELIABILITY.
- RoHS COMPLIANT.
Description
The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode.
|
|
PCB Mounted LED's
J1001X R/Angle PCB LED
Features and Benefits
♦ Solid State Reliability
♦ Mean Time Between Failure 100,000 hours (11½ years)
♦ Board Space Saving
♦ “Fit and Forget” Philosophy
|
|
Features:
- Package: rectangular mounting part for 5 mm LED, grey synthetic
- Feature of the device: The rectangular mounting part series has been specially designed to work with the 5 mm radial LED from Osram Opto Semiconductors.
Applications:
- This component can be equipped with a 3 mm or a 5 mm LED.
- Several components can be installed in series.
|
|
Vertical LED Assemblies
5mm Narrow Profile
3mm Standard Profile
5mm Standard Profile
3mm Narrow Profile
ELM7
3mm Universal 5-hole Mount
3mm Rectangular
Universal Black Self-Retaining
Universal Natural Self-Retaining
Variable Height Vertical
Right Angle LED Assemblies
Single 5mm LED Holders
Multi-Functional Assembly for 90 ° Display
Sub-Miniature (2mm) 90 °
Single-Level 90 °
Bi-Level 90 °
Tri-Level 90 °
Quad-Level 90 °
Rectangular 90 °
3mm SMD 90 °
5mm SMD 90 °
Panel Mount Assemblies
|
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
APEM, a comprehensive range of professional LED indicators
- LED indicators for panel mounting
- Seven different diameters: 6, 8, 12, 14, 16, 19 and 22 mm
- Three different bezel shapes: prominent, recessed and flush
- Bezel materials plated in bright chrome, black chrome and satin chrome
- Solder lug, quick-connect, pin or wire terminals
- Standard diffused red, green, yellow, blue and white LEDs, plus bi-colour, tri-colour and flashing LEDs
- Complementary range of super bright, water clear LEDs also available (sunlight visible)
- Optional panel sealing to IP67
Integral resistors permit direct connection to 12V, 24V,110V and 230V.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
The P861 LED Lamp provides visual on/off indication of process conditions in both safe and hazardous areas. Available in a choice of six super-bright colours (red, orange, yellow, green, blue and white), they are ideally suited as part of a panel mounting indicator or illuminated pushbutton assembly.
The P861 itself is a standard BA9s intrinsically safe LED lamp which can be supplied as part of a pilot light or illuminated pushbutton or alternatively supplied separately to be used in any standard switch or lamp assembly.
With the LED lamp being current limited to take a maximum of only 20 mA, it is possible to drive two lamps from a single IIC interface without any affect on the brightness.
With the LED's low power consumption, low heat dissipation and long life expectancy, the P861 is an ideal indicator for safe and hazardous areas alike.
|
|
• Filament lamp or neon illumination
• LED illumination, dc or ac ratings (mains 125/250V dual rating)
• Red, yellow, green, clear or blue colours (as standard)
• Panel mounting holes from 5.8mm to 25mm diameter
• Front of panel sealing to IP54
• Wide choice of profiles
• Circular and rectangular formats
• RoHS compliant
|
|
|
|
|
|
VCC's CMS 322 lens is designed to provide a means of protecting equipment from both drip or splash conditions while displaying panel or circuit board mounted LEDs.
The traditional methods of moisture sealing have been the use of bulky military style indicator lights requiring o-rings, nuts and washers. While these units are effective, they do not provide aesthetics desired in today's modern equipment designs. As a result, engineers faced with the problem of moisture sealing are forced to design elaborate display panel windows with special gaskets. When limited by design funds, engineers have attempted to seal standard panel lenses or indicator lights with adhesives such as RTV. These methods are very expensive in component hardware, extremely labor intensive and lack required aesthetics.
VCC's CMS 322 low-profile lens is equipped with a moisture sealing gasket. Tests by an independent environmental testing laboratory have shown that the lens provides an effective seal against splash and drip conditions. In addition to the water tests, the lens and retaining systems were tested up to 6Gs of shock and from 0 to 2000Hz of vibration. An operating temperature test from -40°C to +85°C and a UV test were also performed. The conclusions attained upon completion of these tests were that the CMS Series lens and the retaining systems used exceeded all test criteria.
|
|
FLASHING DEVICES
The electronic lighting fixtures for electrical panels provide an efficient, easy-to –install, technologically advanced tool. The product created as a result of this project has a modern compact design and makes lamps extremely versatile, with different possibilities of positioning and rapid installation speed.
Models from 8w to 21w with 24CC/AC, 125V AC and 240V AC power supply
Installation of the flashing safety device prevents accidents, warning the operator of the presence of voltage in the electrical system by means of flashing. The DSL flashing devices are installed in highly visible positions upon opening of the electrical panel doors, and connected directly downstream to the main switch. The flashing of the three red lamps highlights hazardous conditions. The DSL devices can be connected to both three-phase and single phase lines.
|
|
|
|
