|
|
This range of panel mounting LED indicators consists of many different bezel styles, types of LED’s and colours. The range has developed to meet the many different needs of panel design including IP67 environmentally sealed versions for use where a front panel seal is needed.
The vandal resistant LED indicators are designed to complement the vandal resistant switches (see the Switch Section, page 177), they have similar profiles with stainless steel bodies, sealing to IP66 & 68 and are built to withstand harsh environments.
|
|
|
EAO indicators / pilot lights with protection up to IP 67 and different coloured lenses and LED illumination. The indicator / pilot light can be modified with bezels for raised or flush mounting.
|
|
KRN - Pilot Light Head
description:
Body: LMN -
Pilot Light Head 24 x 18 mm
description:
with labelling option
LXJL5 - Pilot Light 54 x 27 mm
description:
T5.5K socket
LXJN - Pilot Light Head 54 x 27 mm
description:
with labelling option
LXJNN - Pilot Light Head 54 x 57 mm- IP40
description:
accepts 2 separate lampholders, with labelling option
LXL5 - Pilot Light 25 x 50 mm
description:
with labelling option
|
|
J1800 - Format DIN 96x96
J2000 - J2400 (J2100 / J2200 / J2300) - Format DIN 144x144.
The most basic models.
They are intended to replace filament indicator lights on cabinet front panels.
- 8, 12 or 24 "high luminosity" leds.
- Light up on closing of the input contact.
- "Test led" buttons on the front panel.
- Labels are easy to make (on PC).
- Economical and strong.
Option:
Remote carry "synthesis" relay, selection is channel by channel. No reset possible.
(See also the J1900 / J3000 / J3500 range of alarm sequence panels)
|
|
EZ-LIGHTTM Operator Indicator Lights
- Displays multiple colors of highly visible LEDs in each unit
- Offers five housing styles for easy integration
- Replaces post or stack lights with a single compact unit
- Installs without certified personnel, near the operator
- Several configurations for a variety of applications
- Displays one to five colors, depending on model
- Eliminates bulb replacement with long-lasting LEDs
- Compatible with PLC or other logic-level control outputs
- IP67 for direct machine mounting
|
|
|
Immediate indication of process status is a must in any application. Realize this goal with Signalight towers that offer 360 degree visibility from any direction or the SLC series panel mounted pilot light arrays which provide for a more detailed local indication. Both offer a variety of configurations, and either LED or incandescent lamp illumination.
|
|
|
Immediate indication of process status is a must in any application. Realize this goal with Signalight towers that offer 360 degree visibility from any direction or the SLC series panel mounted pilot light arrays which provide for a more detailed local indication. Both offer a variety of configurations, and either LED or incandescent lamp illumination.
|
|
|
A rich variety of shapes, sizes and colours of signal lights are available and suitable for different series of rocker or push-button switches.
|
|
|
The ET-16 (Incandescent) and ET-17 (Neon) indicating lamps are designed for application on switchboard panels up to and including 1/4-inch thickness. The lamps economize on space and permit easy replacement of bulb and resistor.
|
|
|
Immediate indication of process status is a must in any application. Realize this goal with Signalight towers that offer 360 degree visibility from any direction or the SLC series panel mounted pilot light arrays which provide for a more detailed local indication. Both offer a variety of configurations, and either LED or incandescent lamp illumination.
|
|
| ... products without technical information |
| |
VCC's LCS Series Litepipe® provides display panel moisture seal and 180° viewing angle. This lens and Litepipe® unit was developed to provide moisture sealing and dust control for display panels when the LED is attached to a circuit board.
Currently, the moisture sealing of a Litepipe® to a display panel requires the use of RTV-type adhesive. When applying glue for sealing, special precautions must be taken to avoid creating air gaps that would allow sealed joints to leak. Glues are not only difficult to apply but their adhesion to a lightpipe surface will change the flow of the light pattern. This also causes light leakage resulting in reduction of light emitted by the litepipe. In addition, the output surface of a lightpipe alone whether flat, concave, or convex projects little or no sidelight. This gluing method results in serious assembly problems and less than satisfactory panel displays.
|
|
|
Illumination from 360˚ produces a uniform light. These light guides are optimum for CCD camera and microscope inspections.
|
|
Flexible Light Pipes
Flexible Light Pipe Assembly
Flexible Light Pipe IP67 Watertight Lens Assembly
Flexible Light Pipe Infrared Lens Assembly
Flexible Light Pipe Lens
Flexible Light Pipe Through-Hole Assembly
Flexible Light Pipe SMD LED Assembly
Rigid Light Pipes
90 ° Multi-level SMD Style
Panel Mount Light Pipe Rear-Mount
Panel Mount Light Pipe Front Mount
Panel Mount Light Pipe Dual Lens Style
90 ° Variable Centerline SMD
Vertical Board Mount Round SMD
Vertical Board Mount Rectangular SMD
|
|
| ... products without technical information |
| |
New LED light source:
- with lithium-storage-battery
- light intensity stepless adjustable
- battery-supplied and rechargeable
- extraordinary compact design (27 x 89 mm, 90 g)
- ACMI-connection - almost unlimited compatibility
- no bulb exchange necessary due to LED technique
- 45 minutes operating time at maximum power
- at least 100 lm light output
- 2 h charge time
Furthermore we offer a lot of other lighting accessory items, aimed at your individual requirements:
Light source metal halide MS-24:
- short arc lamp, 24 watt
- compact design (length=114,3mm, width=83,8mm, length 83,8mm)
- light illumination ≥ 70.000 Lux
Halogen-light source:
- 100 or 150 Watt
- stepless adjustable
Light guides:
- with different diameters and lengths
- with bonded or fused fibres
Further information about the several product groups and their particular advantages you can find on our webpage.
|
|
KARL STORZ only uses cold light projectors with its endoscopic products. With this technology, light from the cold-light projector is transmitted through a fiberoptical or fluid lightguide to the endoscope tip.
Cold-light technology offers many benefits:
• Very bright light
• Heavy-duty, robust technology
• Compact size of fiberoptical lightguide
• Does not contain any significant heat radiation
Cold light is suitable for testing in potentially explosive environments. KARL STORZ cold light projectors are available with a choice of different lamp systems and performance levels, enabling us to provide you with the optimum light source for any conceivable application.
|
|
Xenon light projectors
The light projectors from Richard Wolf GmbH from 180W to 300 W are especially matched to endoscopic applications and are for interdisciplinary use. Automatic light regulation optimises the luminous flux and ensures ideal light conditions.
Our local medical product advisor will be pleased to provide you more details about our products, or simply request our catalogue.
|
|
|
Portable Xtreme LED light sources are a convenient, easy to use, substitute for bulky halogen or metal halide light sources. These Xtreme light sources feature a high intensity 3W LED, which produces well over 50,000 Lux of illumination, and an adjustable intensity control lever, to vary the illumination for different inspection areas, or areas with reflective surfaces.
|
|
|
The light sources are in fact external boxes which produce illumination intended to clarify the inspection area. These boxes allow a beam of light to pass through a fibre optic to the point to be inspected. At FORT, a full range of sources is available with different types of lamps and levels of power in order to meet the needs of a variety of working environments.
|
|
high intensity light source for endoscopy, video documentation and image processing
Advantage:
highest light intensity and colour realness for continious process control and recognition of smallest defects
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
