|
|
Alarm panel – type AL8-2
The alarm panel is suitable for switchboards in industrial and marine plants for alarm and control purposes.
Features include:
- Compact Q96 design
- Extremely easy push-button programming
- Individual programming of each input: N/O or N/C, time delay, alarm inhibit, output and cable supervision
- Up to 5 units in master/slave configuration
- Clear identification of first alarm received in case of successive alarms
The alarm panel AL-8 is provided with:
- 8 alarm inputs
- 3 relay outputs: - 1 output for connection of horn and 2 outputs used for transmission of group alarms, selective disconnection of faulty equipment, etc.
|
|
|
|
|
|
MAXLOGIC MG-16160 INTELLIGENT ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANELS
The latest Maxlogic Analogue Addressable Fire Alarm Control Panel operates on
unique VIP communication protocol which is combatible to use with all MaviGard
Harezmic products. An easy way to use in large sites up to 16 loops and 2032
addresses.
FEATURES
EN54-2 and EN54-4
Compatible with MaviGard Harezmic Series addressable devices.
Up to 64 panels and/or repeater panels can be assembled into a network
LCD (240 x 64 characters) with blue backlight
1000 event log memory
1000 user-defined zones
Extendable loops up to 16 loops, max. 2032 address capasity
Detailed fire alarm and fault warnings
Top priority of fire alarm indication,
different buttons for fire and other events,
caterogical classification due to events.
Real time clock
Communication interrupt for fast fire alarm detection in 1.5 sec
Loop polling in 7.5 sec
4 programmable supervised remote control inputs
Models with printer available
Protection from electromagnetic interference
Communiation with RS232/RS485,GPRS/TCP-IP
Microprocessor-controlled design
Supervised peripheral devices, extension cards (power supply, loop extensions,
printer...)
Day and Night mode, pre-alarm, contamination warning
Virtual panel, supervisor applications
Input/output modules can be connected to panel directly
Advanced control/monitoring features
Creating cause-effect scenarios due to device or zones
By the help of Boot Loader software
updating software on the site
Event selection for input/output devices
Advanced parametric arrangement options for input/output devices
Creating user-defined event type
|
|
HAREZMIC MG-7100 SINGLE LOOP INTELLIGENT ANALOGUE ADDRESSABLE
FIRE ALARM CONTROL PANEL
Single loop structure, stylish exterior design and enhanced programmability make the MG-7100 an economical and technologically top-level solution for small and medium sites. EN 54 and SSPB (Russia) and GOST R certified. Approved by Kazakhstan, Oman, UAE, and Bahrain Civil Defence authorities.
Features
Very Intelligent Communication Protocol
Display priority to fire events
Polling interrupt for fast alarm detection
64 x 240 pixel LCD with adjustable blue backlight
Password-protected access levels
Printer output
Displaying detector measurements
Real-time clock
1000 event log memory
Microprocessor-controlled
PCBs made by use of Surface Mount Technology
2 programmable and supervised sounder outputs
3 programmable relay outputs
16 user-defined zones
Loop polling in 7.5 sec
Protection against electromagnetic interference
Auxiliary power supply output
Soft-touch buttons
Built-in silenceable buzzer
|
|
CONVENTIONAL FIRE ALARM CONTROL PANELS
MODELS:
MP-8 Series
MG-8 Series
MS-64 Series
SD64+ Series
FEATURES:
Highlights
2, 4, 8, 16, 32, 64 zone models(differs due to panel models)
Zonal Fire and Fault LED indicators
Button control key
Zone Test and Zone Disable modes
Zone location text on front panel
Soft-touch buttons
Microprocessor-controlled
PCBs made by use of Surface Mount
Technology
Supervised Sounder outputs
Supervised Relay outputs
Compatible with all popular conventional fire detectors
Protection against electromagnetic interference
Optional repeater panels
Optional relay modules
Auxiliary power supply output
LED test by use of single button
For more information email us
|
|
|
|
|
|
FILTER ALARM PANEL AND SMARTFILTER CONTROL SWITCH
The Polylok filter alarm panel and switch provides a visual and audible notification of impending filter and tank servicing. Our Patented SmartFIlter control switch attaches to Most Polylok Filters and All Zabel & Best Filters. The filter alarm switch activates when the filter cartridge is near capacity on solids that have built up through the filtering process. The filter alarm switch sends a signal to the alarm panel activating the septic tank alarm. The owner will need to call a local septic service company for immediate service.
FEATURES:
- Complete package includes standard VRS control switch with 15 feet of cable, indoor/outdoor alarm panel, and an effluent filter
- Alarm panel, control switch, and an effluent filters can be purchased separately or as part of a system package
- Alarm panel features manual alarm test switch and horn silence switch
- Alarm horn rated 82 decibels at 3 meters
- Direct interface of control switch and effluent filter insures proper placement of switch
- Alarm sounds when the tank and filter reach 90% maturity
- For indoor/outdoor use
- Three-year limited warranty
|
|
General Information
4 loop analogue addressable fire panel utilisting soft addressing technology and incorporating a highly versatile touch screen user interface.
Supplied with extended autonomy battery and integral printer
Touch screen user interface
Integral battery and power supply
Integral printer
Optional hinged lockable cover
Wide range of compatible interfaces
Specification
Brand: Menvier
Dimensions (mm): L495 X D200 x H400
Weight (KG): 27
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 4
Standby Period: Dependant on system loading
|
|
|
|
|
|
FireNET (9th Edition)
Analog Addressable Fire Alarm Control Panel
STANDARD FEATURES
UL 864 9th edition approved
Analog design using Hochiki's advanced DCP protocol for fast and robust communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each
Programmable sensitivity levels per device & automatic day/night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
*500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: *Cause & Effect action, *Disable function configuration, *Test mode configuration
|
|
General Information
2 loop analogue addressable fire control panel to operate with JSB analogue detectors
Up to 198 addresses per loop
Compact enclosure
16 LED zonal indicators
Specification
Brand: JSB
Dimensions (mm): L330 x D90 x H270
Weight (KG): 5.4
ANA Number: 5021621242384
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 2
Standby Period: User specified
|
|
|
|
|
|
The LHL, LHI meets or exceeds factory Mutual (FM) Approval Standard temperature Limit Switches Class 3545.
They are designed to automatically shut down a process when the measured value exceeds a pre-programmed value.
Alarm masking:
Puts the alarms in the stand by condition (mask) during instrument power up or masks a deviation or band alarm if the alarm condition is a
result of a set point change. In both situations the instrument maintains the alarm masking for the duration of the alarm condition.
Logic input:
These instruments are equipped with a logic input used to acknowledge an alarm condition by an external contact.
Maximum and/or minimum data hold:
The LHI is able to memorize the maximum and the minimum measured value. This function is automatically enabled at instrument power up
and it is always active.
Power supply failure indication:
These instruments are able to signal if a power failure occurs during normal instrument operation.
Power fail recovery settings are user configurable.
|
|
|
Configurable indicators for temperature, pressure, force, current and AC voltage, position, normalized inputs, with up to 4 alarm outputs, analog retransmission output, serial communication
|
|
Universal digital panel meter
Reference : AK9400U-2
Setable with keyboards on front plate
Display 99999 Counts
Process input current (<22mA), tension (< 200Vdc)
Potentiometer
Température input Pt100 and Thermocouple
Sensor power supply 24Vdc, 22mA
4 relays output 1RT.
2 insulated analogue outputs curent and tension
1 RS485 MODBUS, JBUS output, allowing configuration and mesure
Input/output insulation 2500V
Power supply 20Vdc to 370Vdc and 80Vac to 265Vac.
|
|
|
|
|
|
2408i Universal Process Indicator and Alarm Unit
Accurate stable measurement of temperature, pressure, level, flow and other process variables are provided by the 2408i universal indicator. An optional second process value input allows the average, difference, minimum or maximum of two values to be displayed. Temperature linearization functions for nine thermocouple types and Pt100 resistance thermometers are selectable. Other input linearizations can be factory downloaded. Strain gauge and presssure sensor inputs can be energized from an internal 5 or 10Vdc supply. An automatic calibration routine is provided to remove zero and span offsets. For flow measurements, square root extraction is available as standard.
Features:
- Four alarm setpoints: For alert and plant protection
- Serial communications: For supervisory control and data acquisition
- DC retransmission: Fully isolated retransmission to remote control and monitoring equipment
- Second PV input: For monitoring auxiliary signals
- Strain guage input: For pressure monitoring
|
|
| ... products without technical information |
| |
InTouch Wireless Monitoring System
When the alarm sounds you need to be inFormed immediately. You need a device that can inTelligently tell you the exact location, exact time and exact reason for the shutdown. You need a device that works in today's technology 24 hours a day, 7 days a week and not be a financial burden.
The inTouch Wireless Monitoring System was developed to communicate directly to you through the nationwide cellular network, AMPS (Advanced Mobile Phone System), eliminating the need for costly telephone lines. And because inTouch is a cellular device, inStallation time is greatly reduced.
|
|
|
|
|
|
SATELNODE X8SR is the basic VHF receiver of the SATEL local area transfer system. Together with SATELCODE alarm transmitter from SATEL, it provides the easiest way of setting up a wireless alarm transfer system.
The SATELNODE X8SR comprises of a high quality radio receiver with excellent selectivity and stability.
It is capable of processing coded messages from SATELCODE transmitter.
The SATELNODE X8SR is also equipped with an RS-232 interface, which provides a flexible means of programming the radio modem with a PC, to meet the varying needs of applications.
By means of the SATELCODE / SATELNODE alarm transfer equipment, SATEL has drastically lowered the threshold of setting up a local alarm transfer system.
SATELCODE is a versatile VHF radio transmitter from SATEL's extensive selection of radio modems. Together with its counterpart, the SATELNODE receiver, it provides the easiest way of setting up a wireless alarm transfer connection between two points.
The SATELCODE transmits a message that includes both address and alarm information. The number of possible different messages amounts several tens of thousands.
The configuration of a SATELCODE / SATELNODE system is straightforward and the installation quick and easy. The user benefits from minimum time spent in planning and materialization fo an alarm system. The radio modems are extremely reliable. The operation costs of the alarm transfer system are low, as there are practically no network charges.
|
|
The space-saving communication-solution for technical installations.
Modem / SMS Alarm-Messender
All “CombiLine” models became developed specially for industrial surroundings and they are corresponding to the most currently data-transmission-norms.
With the help of the included software package, the modules will be configured easily over the COMinterface.
8 alarm-signal-inputs, 2 switchable signal-outputs.
By activation the input lines, faults will be announced by sending an SMS message and displayed on a mobile phone, voltage breakdowns will be indicated as well.
While power interruption, the modules remain in operation by using an optional built-in NiMH accumulator.
|
|
|
|
|
|
Anybus RemoteCom enables remote management of industrial equipment from a standard web browser. By providing fast and accurate information at any time and place, RemoteCom helps to minimize equipment downtime, unnecessary travel of service personnel, helping to secure our natural environment.
With Anybus RemoteCom, HMS Industrial Networks provides a complete new product series for remote visualization and control of industrial devices and machinery. Anybus RemoteCom is an easy-to-use web gateway. RemoteCom acts as a Modbus bridge and gives remote access and control of serial devices over Ethernet, Internet, LANs, GSM, GPRS and telephone modems.
RemoteCom contains built-in features for alarm handling (SMS, E-mail, SNMP), data logging and web-based data access. RemoteCom has a powerful embedded webserver for visualization of the device data that can be accessed from any standard web browser. The user can easily and securely access devices from anywhere at anytime.
In addition to the visualization and diagnostic functions, RemoteCom provides the ability to remotely control devices. RemoteCom enables authorized users to select and modify device parameters such as, target values or operation mode.
The network configuration of RemoteCom is easy and made via the inbuilt webserver. The webserver is also used to setup the serial Modbus connection to the industrial device or machinery. Pre-defined device templates supplied with RemoteCom ensures a fast and easy setup. No programming or windows tools required!
As an additional service, a secure online management server is available that expands the functionality of Anybus RemoteCom.
|
|
| ... products without technical information |
| |
|
|
|
|
The Concorde Webs is a mixed antitheft system via thread/via radius 868Mhz. Express studied for a professional installation, that it demands a system of mixed type for being able to obtain the best advantages of the two tipologie of income: the concretezza of wired incomes (max. 4) for the easy raggiungibili zones and the use of technologies not available via radius. The flexibility of the incomes via radius (max 24) for being able to easy catch up every point of the protected atmosphere. The heart of the system is centers it them, telegestibile, ideal for small systems and average dimensions, completely able to manage until to 8 codes customer with remote keyboards connected on seriale line. The remote control (mod. BIP) beyond offering flexibility in the management of the system, guarantees emergency thanks to the possibility to carry out of the activations of emergency. Centers has they to edge the telephone comunicatore types them for the connection to the institutes of vigilance and the PC of the installatore for the technical control. With the synthesis module vowel (optional Mod. SINT) is moreover possible to send prerecorded messages of alarm.
The sensors via radius are all fed from A batteries the Lithio to long duration: Passive infrared SPY WS; Passive infrared WING WS to vertical protection for tapparelle and doors; WIC2 WS magnetic contact for doors and windows; SPIDER PA WS double infrared liabilities from outside and inside; BM60M WS barrier to microwaves from outside and inside.
|
|
Wall-mounted consoles and remote control units are the instruments for "communicating" with the Tecnoalarm security systems. You may choose the simple ones for traditional domestic applications, or one of the more complete if you have far-reaching requests for customization in terms of arming and disarming of zones at preset hours with daily or weekly frequency.
The interface man-control panel has been made extremely simple and natural thanks to service indications viewed on display and a comprehensive library of voice messages that allert, help and advise according to an explicitly user-friendly logic.
The comfortable numerical keypad with special system keys, makes every process easy and quick.
|
|
| ... products without technical information |
| |
|
FLS are flow switches used to check the fluid crossing in lubrication circuits and to activate an electrical alarm signal in case of flow decrease under the setting value
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
