|
|
|
|
|
|
Wellhead Control Panel
Standard:
•API RP14A Subsurface Safety Valve Equipment, Ninth Edition, December 1994
•ASME Boiler and Pressure Vesser Code
•National Electrical Code (NEC)
•API RP 14C
Application:
•Designed ESD system as per latest technical specifications and the actual working conditions. Apply to the effective control of SSV (surface safety valve), SCSSV (surface-controlled subsurface safety valve) and wing valves, etc.
Features:
•Well opening via hand/electric/air-operated pump, meanwhile, it features pressure self-maintaining and automatic compensation, any pressure drop due to ambient temp drop or leakage, the accumulator will automatically compensate the pressure.
•High & low pressure sensors are installed on the wellhead oil transmission line, in case of higher or lower pipeline pressure than the set value, the high and low pressure sensors will cut off the control circuit quickly, thus, the wellhead is turned off.
•In case of a fire on the wellhead, the fusible plug will be melt when the ambient temperature is reaching the melting condition, so that to shut down the wells.
•Automatic pressure relief. Surplus high pressure will be released to maintain the wellhead normal operation whenever temperature changes or mis-operation happened.
•Suit high & low temperature environment (-30~60℃).
•Stainless steel and rational structure design effectively isolates the natural gas and power, safer and explosion-proof.
•Control types: single well with single valve, single well with multi-valve, and multi-well with multi-valve.
•Both manual control and remote control for emergency shut down.
|
|
Fire alarm control panel features
01. Compatible with EN 54-2 and EN 54-4
02. 2, 4, 8-zone options
03. Designed for small and medium site applications
04. Compatible with all popular conventional fire detectors
05. Fire and fault situations in zones are indicated by Zonal Fire and Fault LED indicators and Piezzoelectric buzzer
06. 1 unit of automatic-fuse protected supervised sounder output and 1 unit of 24 V DC 500mA auxiliary power supply output
07. 1 unit of fault relay with volt-free changeover contacts rated 1A 30 V DC, NC and 1 unit of fire relay with volt-free changeover contacts rated 1A 30 V DC, NO
08. Simplicity and clear understanding of control buttons and indicators
09. Optional repeater panels
10. LED test by use of single button
11. Button control key to prevent unauthorised access
12. Easy cable entries from both above and back sides
13. Microprocessor controlled
|
|
Fire alarm control panel features
01. Compatible with EN 54-2 and EN 54-4
02. High and stable operation performance
03. 8, 16, 32 or 64 zone models
04. 24 V DC operation voltage
05. PCBs produced using surface mount technology
06. Stylish exterior design
07. Microprocessor controlled design
08. Compatible with all popular conventional fire detectors
09. Optional repeater panels
10. Zone Test and Zone Disable Modes
11. Detailed information on fault events by LED indicators and seven segment display
12. 2 units of automatic-fuse protected supervised sounder output and 1 unit of 24 V DC 500mA auxiliary power supply output
13. 1 unit of fault relay with volt-free changeover contacts rated 1A 30 V DC, NC and 1 unit of fire relay with volt-free changeover contacts rated 1A 30 V DC, NO
14. LED test by use of single button
15. Button control key to prevent unauthorised access
|
|
Fire alarm control panel features
01. Compatible with EN 54-2 and EN 54-4
02. 8, 16, 32 or 64 zone capacity options
03. Microprocessor-controlled
04. 2 sounder outputs, fire and fault relay outputs
05. PCBs protected with metal case
06. Protection from electromagnetic interference
07. Soft touch buttons
08. Zonal Fire and Fault LED indicators
09. Button control key to prevent unauthorised access
10. Piezzoelectric buzzer and 16 fault indicators
11. Switched mode power supply SMPS) microprocessor-controlled
12. Zone Test and Zone Disable functions
13. Delayable sounder output activation
|
|
Fire alarm control panel features
01. Compatible with EN 54-2 and EN 54-4
02. Designed for small and medium site applications
03. Some models used with 24 V DC 1.5A external power supplies
04. 2 or 4 zone options
05. Up to 32 units of standard conventional fire detector can be connected to a fire zone
06. 1 unit of 24 V DC 500mA automatic-fuse protected and supervised sounder output
07. 16 units of MG-5000 Electronic sounder or 8 units of MG-5200 sounder strobe can be connected to the sounder output
08. 1 unit of fire relay with volt-free changeover contacts rated 1A 30 V DC,NC/NO
09. By the help of Zonal Test function, detector tests can be handled by single person
10. The desired zones of the panel can be disabled by use of "Disable" function
11. Simplicity and clear understanding of control buttons and indicators
12. Easy cable entries from both above and back sides
|
|
|
|
|
|
Fire alarm control panel features
01. Compatible with EN54-2 and EN54-4
02. Up to 64 panels and/or repeater panels can be assembled into a network
03. Extendable loops up to 8 loops,max. 1016 address capacity for each panel
04. 1000 user-defined zones and 1000 event log memory
05. Top priority of fire alarm indication, different buttons for fire and other events, categorical classification due to events
06. Real time clock
07. Communication interrupt for fast fire alarm detection in 1.5 sec
08. Loop polling in 7.5 sec
09. 4 programmable supervised remote control inputs
10. Protection from electromagnetic interference
11. Ability of communication with enhanced computers(RS232/RS485 for close access, GPRS/TCP-IP for remote control)
12. Supervised peripheral devices, extension cards (power supply,loop extensions, printer...)
13. Day and night mode, pre-alarm, contamination warning
14. Virtual panel, supervisor applications
15. Input/output modules can be connected to panel directly
16. Advanced control/monitoring features
17. Updating software on the site by the help of Boot Loader software
18. Advanced parametric arrangement options for input/output devices
19. User-defined event types creation
|
|
General Information
2 loop analogue addressable fire control panel to operate with JSB analogue detectors
Up to 198 addresses per loop
Compact enclosure
16 LED zonal indicators
Specification
Brand: JSB
Dimensions (mm): L330 x D90 x H270
Weight (KG): 5.4
ANA Number: 5021621242384
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 2
Standby Period: User specified
|
|
General Information
4 loop analogue addressable fire panel utilisting soft addressing technology and incorporating a highly versatile touch screen user interface.
Supplied with extended autonomy battery and integral printer
Touch screen user interface
Integral battery and power supply
Integral printer
Optional hinged lockable cover
Wide range of compatible interfaces
Specification
Brand: Menvier
Dimensions (mm): L495 X D200 x H400
Weight (KG): 27
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 4
Standby Period: Dependant on system loading
|
|
|
|
|
|
The new Digital Indication and Control Instrument VarioFox from AFRISO is a compact, ready-to-connect universal measurement and control instrument with integrated sensor supply and 2 (also choice of 4) voltage-free switching outputs. The instrument is very easy to operate and to program due to its text-orientated menu guidance (German, English or French).
VarioFox features a measurement unit listing, where units can be freely edited, as well as a free scaling/calibration of start and end of scale display values (99.999 - 9,999) which allows for almost all possibly required parameter settings. For horizontal cylindrical and spherical tanks integrated calibration charts can be accessed. For non-linear vessels or specially fabricated tanks a customer- specific 24-point linearization is available. The highest and lowest operational values are memorized but can also be utilized as instrument-internal visual and audible alarms on request. An alarm mute/accept button on the front of the instrument requires the responsible operator to act and this in itself provides for additional operational safety.
The measuring instrument works off an AC 50-253 V or DC 20-253 V supply and integrates a sensor input (4-20 mA, 0-20 mA, 0-10 V) and two isolated separate analogue outputs (0/4-20 mA und 0-10 mA).
|
|
The DMP200 series consists of four universal input indicators offering unparalleled price and performance. The use of surface mount components and modern microprocessor technology has enabled powerful features to be packed into a standard 1/8 DIN case.
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. The "Fast-Cal" feature provides a fast and simple means of calibrating an indicator to the transducer at any two stroke positions.
|
|
The DM- 100 Digital Load meter displays motor load. The DM-100 can be adjusted to read the motor load in :
- Percent 0 - 100%
- Horsepower
- kW or W
The input for motor load indication comes from the analog output of a Load Controls, Inc. Load Control or from a LCI Powel Cell power transducer
.
|
|
Profile:
Founded in 1967, Setra Systems, Inc. is a leading designer and manufacturer of pressure, acceleration, and weight sensing devices. Setra has devoted its engineering and research efforts to the development of transducers and systems based on the highly accurate variable capacitive transduction principle. Setra Systems was acquired in December 2001 by Gems Sensors of Plainville, Connecticut. Gems Sensors designs, manufactures and markets liquid level, flow and pressure sensors and controls and is a division of the Danaher Industrial Controls Group since 2004.
Products:
Process Automation & Sensing Controls: Sensors: Accelerometers, Digital Displays, Weigh Systems, Digital Manometers, Transducers
Digital Systems,
|
|
|
Cambridge Technologys EC1000 is the next generation in galvo-steered laser control systems. This compact, fully integrated dual system-on-a-chip (SoC) control system is ideal for deployment into modern factory environments with distributed automation. In this environment, a single host computer can supervise a factory of networked laser marking appliances. The EC1000 is designed to be completely embedded into a scanning head and does not require a nearby physical host computer for operation. Remote Access, Remote Control, and Remote Monitoring are fully supported for tetherless operation in a distributed laser marking environment. Factory reliability and EMI immunity are ensured through the use of optically isolated digital control ports.
|
|
SMART designs and manufactures high-quality, cost effective custom and standard displays and controller boards. Through a winning combination of worldwide logistical capabilities, wide-reaching technical support, and renowned technical expertise, SMART offers unique advantages to OEMs developing products for Kiosk, Digital Signage, ATM, Gaming, Embedded Display, and Embedded Controller applications.
Principally focused on providing unparalleled customer service and high-quality products, SMART is solidly positioned to service OEM standard and custom display and controller board needs. By capitalizing on a tradition of longstanding partnerships with key suppliers and customers as well as a broad global manufacturing footprint, SMART can reliably provide OEMs with high-quality solutions that fit their budget.
|
|
The Wildcat gives OEM designers optional Ethernet connectivity in a low-cost, high-performance single-board computer. These compact boards are rich with the digital I/O, A/D, and D/A designers need for embedded control and monitoring applications, and the Wildcat's compact board allows for easy integration.
Ethernet models are ideal for remotely monitoring and supervising another programmable system or web-enabling new or existing products.
|
|
The Epson fieldbus systems are the ideal connection of an Epson robot with an industrial fieldbus system. No matter if Devicenet or Profibus, the connection of fieldbusses to an Epson controller is completely integrated into the Epson developer surface Epson RC+.
So it is possible to use the high performant fieldbusses.
|
|
xRSUNI & xRSUNI-LP series
Cost-effective solution to add 2, 4 or 8 high performance serial ports, universal bus, standard & low profile for PCI & PCI-X computers
Serial multiport communication board with 2, 4 or 8 asynchronous serial ports
Supports all PCI form factors & environments : SP, LP MD1, PCI 3.3V, PCI 5V, PCI-X.
High performance :
RS232 1 Mbps or RS422/RS485 1.8 Mbps, 1 Mbps for the isolated RS422/485 model
128 bytes receive and transmit FIFOs
PCI "Plug & Play" board
RS232, RS422 or RS485 line interface with & without isolation depending to models
Very high reliability, M.T.B.F. > 10e6 P.O.H.
Automatic line turn-around for the RS422/RS485 model
|
|
|
|
|
|
Model ROBO-N201G
One-port Gigabit Ethernet extension module with Portwell OmniPCI connection interface
Intel® 82540EM
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
One accessory card for extension Ethernet port(s), Link, and Speed indicators (Two LED indicators; one shows green when linked and blinks when transmitting or receiving data, the one shows green when linked at 100 Mbps and yellow when linked at 1000 Mbps)
One Ethernet RJ-45 daughter board and one daughter card
Support IEEE 802.3
Auto-negotiation algorithm of full-duplex and half-fuplex operation for 10 Mb/s and 100Mb/s (NWAY)
Dimension : 77(L) x 52(W) mm
Model ROBO-N100P
Fast Ethernet extension module with Portwell OmniPCI connection interface (P4 solution)
For Intel® Pentium® 4 processor based SBC
Intel 82559
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
One Ethernet RJ-45 daughter board and one daughter card
Support IEEE 802.3
Auto-negotiation algorithm of full-duplex and half-fuplex operation for 10 Mb/s and 100Mb/s (NWAY)
Dimension : 77(L) x 52(W) mm
|
|
PMC Gigabit Ethernet Controller
32/64-bit, 33/66 MHz PCI and/or 66/133 MHz PCI-X operation PMC Module
1 or 2 independent Gigabit Ethernet channels
Copper and/or optical transmissions supported
Auto detect of 10 Base-T,100 Base-TX or 1000 Base-T in copper network configurations
|
|
NETcore® X APCI fieldbus cards
NETcore® X APCI are the fieldbus communication cards based on Hilscher NetX chip. They can be installed and can work on ASEM systems OT/PB800, OT/PB1000, OT/PB1200 and OT/PB1300 equipped with expansion slot. APCI (ASEM PCI) is a PCI bus customised by ASEM.
NETcore® X APCI is available for Profibus/MPI master and slave, CANopen master and slave, Industrial Ethernet master and slave for the protocols EtherCAT, Ethernet/IP, Powerlink, Profinet RT, Sercos III.
Thanks to this wide choice, to the user-friendly configuration tool and to the possibility of combinations with ASEM Premium HMI and CODESYS*, fieldbus connection is fast, functional and allows the development of complete and efficient systems dedicated to plant control and supervision.
|
|
PMC253
Advanced Profibus PMC Controller for Fieldbus Applications
Highly integrated EC-1 ASIC with ASPC-2 technology
Profibus DP V1 master (class 1/2) and slave
Up to 12 MBaud transfer rate
Optoisolated RS485 PROFIBUS interface
|
|
UGM-M72 High End Graphic Module based on ATI M72 with up to 256MB VideoRAM
First modular high performance graphic module for COM concept
High performance
Low Profile
Longterm availability
|
|
Model ROBO-U160
SCSI extension module with Portwell OmniPCI connection interface
Adaptec AIC7892 SCSI Ultra 160/m controller
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
68-pin SCSI connector located at PCBA component side
Support SCSI Ultra 160/m
Single channel
With 68-pin LVDS SCSI cable
Dimension: 77(L) x 54(W) mm
Model ROBO-U160
SCSI extension module with Portwell OmniPCI connection interface
Adaptec AIC7892 SCSI Ultra 160/m controller
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
68-pin SCSI connector located at PCBA component side
Support SCSI Ultra 160/m
Single channel
With 68-pin LVDS SCSI cable
Dimension: 77(L) x 54(W) mm
|
|
CANnes
Description
CAN-Bus PCI-Card with open source Linux driver
The CANnes card is a PCI card which provides a simple, easy to use CAN interface. It is equipped with a male and a female 9 pin Sub-D connector with standard CAN pin assignments. CAN bit rates between 10 and 1000 kBit/s (1MBit/s) are possible. The industry standard CAN controller SJA1000 is used together with the CAN bus driver 82C250 and optical isolation between the CAN controller and the CAN bus driver. A 120 ohms termination resistor is also provided. This resistor can be switched on and off either by a software controlled relay. Device drivers and function libraries are provided for the Windows (98/ME/2000 and NT4) operating systems and also for the Linux operating system. The CANnes cards is CE-approved and also meets FCC specifications. It can be used with every PC which is equipped with PCI slots fulfilling at least the PCI 2.1 standard.
|
|
|
|