|
|
|
Alphanumeric displays are available in a range of sizes from 12.7 to 57 mm character height in single and 13.6 mm dual digit options plus a siingle digit monolithic version.Ideal for low cost text displays, 14 & 16 segment configurations can be supplied and the dual digit 13.6 mm alpha display is also offered with inbuilt driver IC.Typical applications include transportation and point of sale information.
|
|
|
High performance LED bargraphs in a variety of standard stackable packages are designed for use either singly or as a multiple units in applications such as instrumentation, audio equipment, level indicators and computer peripherals. Using an LED bargraph eliminates the alignment and colour matching problems associated with arrays of single LED indicators.
|
|
ATT300 :
can work with any current or voltage input of any transmitter : pressure, humidity, temperature, air flow, air velocity...
Display : -9999 to 99999
Display of the reading : 5 matrix digits
Display of units : 4 digits
Power supply : 24 Vac/Vdc
Analog inputs : 3 x 4-20mA, or 3 x 0-10V, or RS232 + one current or voltage input.
Housing : Stainless steel, IP65
Output : RS232
Modbus system (RS485 network)
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
Examples:
-JUMO di 308 Digital Indicator, microprocessor-controlled, with max. 2 inputs, wide range of expansion options, panel-mounting DIN housing, bezel 96mm x 48mm (70.1550)
Configurable process display text (max. 24-character running text)
Alarm signal text with color changeover green-red (also as running text)
Up to two configurable analog inputs
Three option slots
Math and logic module (option)
4 limit comparators
Fast and convenient configuration through setup program
RS422/485 interface (option)
PROFIBUS-DP interface (option)
cUL/UL approval applied for
-JUMO di48 indicating instrument, programmable via PC Setup with voltage output 24V DC / 45mA, bezel size 96 x 48mm (70.1520/95.1520)
configuration from PC through setup program
electrically isolated measurement input (setup is not isolated from the measurement input)
many different inputs possible: resistance thermometer in 2-/3-/4-wire circuit, thermocouple, resistance transmitter, standard signals, potentiometer in 2-/3-/4-wire circuit
internal cold junction
customised linearisation
offset correction
input filter for interference suppression
24 V supply for 2-wire transmitter
|
|
The DMP200 series consists of four universal input indicators offering unparalleled price and performance. The use of surface mount components and modern microprocessor technology has enabled powerful features to be packed into a standard 1/8 DIN case.
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. The "Fast-Cal" feature provides a fast and simple means of calibrating an indicator to the transducer at any two stroke positions.
|
|
The ATE300 is a multichannel indicator specially dedicated to flush-mounting (or wall-mounting) installations.
• Alternating display of 1 to 3 parameters
• 3 analogue inputs : 3 x 4-20mA or 3 x 0-10V
• 1 RS 232 digital input for KIMO external transmitter (class 200 & 300)
• 1 RS 485 digital input/output (Modbus protocol integrated)
• 22 pre-set units and 3 configurable units
• Configuration via software or remote control
• Electroluminescent front display, made of brushed stainless steel or white
lacquered
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
The digital indicator DI25 is a competitively-priced, multifunction instrument for a wide variety of measuring tasks.
The multi-function input has 18 different input configurations, which can be selected via the rear connections and also by selection the appropriate input signal with in the instrument configuration. In this way it is possible to connect transmitters with current or voltage signals, and both resistance thermometers or thermocouples to the same instrument.
The measured value can be retransmitted for further processing via an analogue 4 ... 20 mA output (standard) or via an RS-485 Serial Interface (optional).
Other analogue retransmission signals are also available as option.
The basic version of the DI25 indicator features three alarm outputs. Instruments with the optional 24 V transmitter power supply have two alarm outputs available.
With the high ingress protection of the fascia (IP66) the digital indicator DI25 can also be used under extreme operating conditions.
All configuration and programming can be done using the front control keys.
|
|
What is OLED?
Organic Light-Emitting Diode (OLED) Display Panel, or Organic Electroluminescence (OEL), possesses the new generation technologies that other flat displays are hard to accomplish –brighter and clearer full color images with more agile responding speed.
The advantages of using OLED
Wide Range of Visibility:
Good visibility from long distance & wide viewing angle
Small Size:
Thickness down to 1,8 mm possible & dot pitch size smaller than for any other
Image Quality:
High colour saturation, high contrast & high speed
Low Power Consumption:
Efficient transformation of electricity into light and low heat output
Operation at low temperatures:
Operates effectively under very low temperatures
Replacement OLEDs
We are now expanding our OLED range to include drop-in replacements for products recently discontinued by other manufacturers.
|
|
Position display units serve to visualize the values measured with linear encoders, length gauges, rotary encoders or angle encoders. Areas of application include:
- Measuring and inspection equipment
- Dividing apparatuses
- Monitoring of measuring equipment
- Manual machine tools
- Measuring machines
Position displays from HEIDENHAIN are designed to be highly user-friendly. Typical characteristics are:
- Highly readable, alphanumeric display
- Simple, logically arranged keypad
- Ergonomically designed push-button keys
- Splash-protected front panel
- Sturdy die-cast housing
Most position display units feature a data interface for further processing in the higher-level electronics or simply to print out the measured values.
|
|
|
|
|
|
Planar's innovative see-through display technology is ideal for applications that require fresh new look with wide angle and crisp viewing characteristics.
- Perfect for transportation, premier consumer electronics and architectural applications.
- Easy to customize into curved shapes to help bring innovative product designs to life.
With the ALD technology - used in creating Planar's electroluminescent displays - where the layers used to coat the display are extremely thin, it is possible to create transparent layers on the display surface. As there are no liquids involved, the displays can be bent or curved to any imaginable shapes. Demos have been developed on a mirror-surface and other even or uneven surfaces can be made into a display with Planar¡'s unique technology.
Planar's EL display range combines long life time with endurance and great visual performance. Traditionally electroluminescent displays use a non-reflective back electrode, which enables high contrast and over 160-degree viewing angle even in high ambient light. The displays have been designed for the most demanding conditions: extreme temperatures and high vibration environments. The operating temperature range of EL displays is -50 degrees Celsius up to +85 degrees Celsius. Properly mounted they can withstand high shock loads as well as severe vibration found in demanding applications.
|
|
When you focus on the process, you're focused on productivity & efficiency. Our highly visible, Alpha 4000 series NEMA 12 displays, ensure continued productivity & safety throughout your production facility. From your desktop PC, your PLC or HMI system you can relay real time production data and manage quality assurance during the process.
Download brochure Alpha 4000 IP55 (182Ko)
Don't risk production coming to a screeching halt.
Our 4000 Series NEMA 12 provides maximum protection against windblown dust and splashing water aroundany of your industrial processes.
|
|
Intrinsically safe analogue indicators - GSI / BSI series
Located in EX area
Field mounting (IP66) or panel mounting
3 1/2 and 4 1/2 digits display or bargraph
4-20 mA loop powered
Front face programming
Agreement : ATEX II 1G
Options : alarms, backlight, internal calibrator, set point station
|
|
S Line - Compact / modular Displays:
Scalable display: 4, 6, 8, 4+7 digits
Universal input: Analog, Digital, By sensor
Retransmission output: Analog or digital
Power supply extended range: 80-265 Vac; 10-40 Vdc / 19-28 Vac; power transducers
Accuracy: 0,1% precision class; A/D conversion 14-16 bit
Alarms (relay): Hysteresys and threshold control
Multiple visualization: Real-time, integrated, totalized measured values
|
|
Symmetricom time displays are designed to provide widely visible time to local or remote areas. Ranging in character size from 0.5 inches to 4 inches high, these displays can be mounted in instrumentation racks, consoles, on ceilings/walls or desktop areas. Our Airborne Time Display is a small and rugged airborne display that can be mounted in a standard aircraft instrument panel.
All of Symmetricom's time code products are available with several optional configurations, and several are capable of displaying countdown time.
|
|
AX 020:
Panel Meter for Standard Signals
Simple low cost indicator with front dimensions 48x24 mm
and LED size 8 mm
Power supply 10 ... 30 VDC
Analogue inputs 0-10V, 0-20 mA and 4-20 mA
Display range -19 999 to 99 999, adjustable zero and full scale value,
14 bits of resolution
Latch input to freeze the display, minimum/ maximum record memory
Easy to set up by only two front keys and menu support
Delivery includes adapter frame for 50x25 mm cut out and
label set with dimensions
|
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
Readouts series VD3 and VD4 display voltage, current, speed, angular or linear positionss and any physical or chemical measure which can be converted into an electrical signal.
All the different availble versions can read analogue or digital signals alike.
The indicators series VD4 avail on front parameter-entering keys and on two relay-outputs with threshold alarms on the displayed variable.
|
|
FUTEK products include Sensors, Cables, Digital Displays, Signal Conditioners, Accessories, and Sensor Verification Systems just to name a few.
Once a particular Futek Transducer has been chosen for a given application, provisions must be made for appropriate excitation and for conditioning the output signal. The nature of the conditioning depends on the electrical characteristics of the transducer and the destination of the signal.
FUTEK related Signal Conditioners with Digital Displays are as follows:
1) IBT100 Bench Top Rotary Torque & Angle Digital Display
2) TEDS Capable IBT500 Bench Top Signal Conditioner with Digital Display
3) IHH300 Hand Held Portable Signal Conditioner with Digital Display
4) TEDS Capable IPM500 Panel Mount Signal Conditioner with Digital Display
5) IPM600 Color LCD Touch Panel Signal Conditioner with Digital Display
6) EXCLUSIVE TEDS Capable Verification Calibration (VCAL) System ONLY offered at FUTEK
|
|
New PAX Lite Model with Relay Outputs : PAXLA
The first in a new series of PAX Lite panel meters has just been released. The new PAXLA can accept DC current, DC voltage, or process input signals, and scale them to a desired readout. This new model also has two form "C" relays capable of switching up to 5 amps, providing complete dual setpoint output control capability!
Flexibility has been built-in to the power supply as well. The newly designed universal power supply accepts 50 to 250 VAC or 21.6 to 250 VDC and provides 24 VDC output for sensor power.
Combining dual setpoint capability, the universal signal input and power requirements, and a low PAX Lite price, the new PAXLA offers exceptional value in a panel meter!
- 5 Digit, 0.56" High Red LED Display
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 AMP Form C Relay
- Universally Powered
- NEMA 4X/IP65 Sealed Front Bezel
- Optional Custom Unit Overlay with Backlight
- Minimum and Maximum Display Capture
|
|
|
|
|
|
The new Digital Indication and Control Instrument VarioFox from AFRISO is a compact, ready-to-connect universal measurement and control instrument with integrated sensor supply and 2 (also choice of 4) voltage-free switching outputs. The instrument is very easy to operate and to program due to its text-orientated menu guidance (German, English or French).
VarioFox features a measurement unit listing, where units can be freely edited, as well as a free scaling/calibration of start and end of scale display values (99.999 - 9,999) which allows for almost all possibly required parameter settings. For horizontal cylindrical and spherical tanks integrated calibration charts can be accessed. For non-linear vessels or specially fabricated tanks a customer- specific 24-point linearization is available. The highest and lowest operational values are memorized but can also be utilized as instrument-internal visual and audible alarms on request. An alarm mute/accept button on the front of the instrument requires the responsible operator to act and this in itself provides for additional operational safety.
The measuring instrument works off an AC 50-253 V or DC 20-253 V supply and integrates a sensor input (4-20 mA, 0-20 mA, 0-10 V) and two isolated separate analogue outputs (0/4-20 mA und 0-10 mA).
|
|
|
|
|
|
The Centor Star is the most advanced force gauge currently available, it has become the benchmark tool for force measurement. Besides having all the functionalities of the Centor Easy, it also provides additional handy possibilities: with its graphic capabilities, it can calculate and display in real time, not only the maximum, but also the values of the particular points of the curve, such as the rupture force, force on a trigger, force at a given time, first peak, etc.
The new features:
– Maximum within a time window: makes it possible to define a particular time period for a test and to calculate the maximum force during that period while keeping the test maximum in memory
– Calculation of the time necessary to reach the maximum force in tension or compression
– Average force over the duration of the test
All these results are stored in memory (up to 100 tests) which allows statistics to be calculated on the maximum values and on configurable calculations, then sent to a PC along with the dates and times of the measurements.
Furthermore, it is possible to freeze its configuration to avoid handling errors. It is the most versatile instrument designed for all tests in industrial surroundings.
|
|
Programmable panel meter for process, temperature and load cells.
Size: 96x48x60 mm.
Tricolor display: ±19999 (4 ½ digits)
|
|
|
|
|
|
PAX Series : Large range of Intelligent panel meters
The PAX Meter is the workhorse of our panel meter line-up. From its sunlight readable display to the wide variety of field-installable options cards, the PAX Meter will easily handle your application requirements. Select from the widest range of inputs in the industry, including models for both digital and analog signals. Their Comms capability allows data collection at various points of the machine and communicates the information to your management system, while still providing the machine operator with a localized display. Installing a complete system? Learn how to put a PAX Meter to work for you.
PAXC - Counter
PAXCK - Timer & Real Time Clock
PAXD - DC Volt & Current Input
PAXDP - Dual Process Input Meter
PAXH - AC True RMS Voltage and Current Meter
PAXI - Counter Rate Meter
PAXP - Process Input Meter
PAXR - Rate Meter
PAXS - Strain Gage Input
PAXT - Thermocouple & RTD Panel Meter
PAXTM - Preset Timer
Display of 5 LED digits of 14mm, with variable intensity for good outdoor readability (factor 1 to 15)
These intelligent solutions can be enabled with optional plug-in cards, for set point alarms (2 or 4),analog output and communications (RS232, RS485, Modbus, Devinet, Profibus), enabled Ethernet via external module (ICM8)
|
|
Strong portfolio of electroluminescent display solutions and broad selection of high-bright, rugged and open-frame displays: Planar has the right embedded display for your particular application.
When you need EL display solutions, no one offers more experience, more expertise or more innovation than Planar. From our pioneering research that brought the technology to life 20 years ago to our continued commitment to providing our customers with the right solutions for their demanding applications, we create EL displays you know you can count on.
Learn more about Planar's embedded display solutions at http://www.planarembedded.com where you can access white papers, application notes, case studies and our engineering team's blog all in one place.
|
|
Electronic-digital position indicators proviede flexible, electronic capture of measured values and semi-automatic adjustment control at axels.
Benefits:
- Spindle pitch, direction of rotation and decimal point can be freely programmed
- Length or angle indication
- Incremental measurement function or offset input
- Zero setting of the shaft is performed at the touch of a button
|
|
Excellent readability, ergonomic handling and smart use: SIKO’s electronic displays are the instruments of choice wherever clear signals from measurement encoders are to be displayed in digital form and combined with logical functions.
All displays are equipped with scaleable intelligence. They allow monitoring of up to three measurement processes at the same time. Information is displayed on a single compact device – regardless of the type and combination of the sensors or encoders connected.
|
|
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
DF30 Display Facia is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
|
|
|
|
PFM - PLANT FLOOR MARQUEE SERIES
LARGE DISPLAYS WITH UNPRECEDENTED COMMUNICATION ABILITIES
* Tri-color Display Provides Instant Notice of Important Information
* Displays Information From Any G3 HMI, And SX/GT Models of the Data Station and Modular Controller
* Graphical Design Allows Bargraphs, Custom Symbols and Graphics
* Four Sizes for a Wide Range of Applications
* AC Powered (110 or 220 VAC, 50 / 60 Hz)
The PFM series facilitates the collection, calculation and communication of critical production and process information such as production targets, cadence, alarms, machine uptime and downtime measurement, and OEE (overall equipment effectiveness). Available in four models, the PFM series offers highly visible, multi-color conveyance of data to the entire plant floor and to the enterprise level. The smallest is suitable to provide data at the machine level, while the largest can be used to communicate information across an entire factory floor at distances of up to 600 feet (182 meters).
Far more than a simple large display, the PFM series features the unprecedented capability to communicate with over 170 different protocols, and to send and receive data from seven or more device types simultaneously.
These unique capabilities, which are provided through a required host device ( Red Lion G3, DSP, or MC), allow collection of data from various sources - with integrated calculation to optimize displayed information in the way it is most useful to your facility. Along with the advanced network communication and data collection, the PFM host enables remote monitoring and FTP transfer of data.
|
|
Large Displays for process control
· Inputs: ±10V, ±0-20mA.
· Three digits size available : 57, 100 and 250 mm.
· From 2 to 5 digits, 1 or 2 displaying sides.
· Serial line option (RS232 or RS485) and dual relay output option.
|
|
|
|
