|
|
|
Configurable indicators for temperature, pressure, force, current and AC voltage, position, normalized inputs, with up to 4 alarm outputs, analog retransmission output, serial communication
|
|
Universal digital panel meter
Reference : AK9400U-2
Setable with keyboards on front plate
Display 99999 Counts
Process input current (<22mA), tension (< 200Vdc)
Potentiometer
Température input Pt100 and Thermocouple
Sensor power supply 24Vdc, 22mA
4 relays output 1RT.
2 insulated analogue outputs curent and tension
1 RS485 MODBUS, JBUS output, allowing configuration and mesure
Input/output insulation 2500V
Power supply 20Vdc to 370Vdc and 80Vac to 265Vac.
|
|
|
|
|
|
When size matter ! Discover the economical new range of Red Lion Large Displays : the LD series, to visualize your main production datas from a distance.
LD
Large Display Counter and Rate Indicator
- 2.25" & 4" High Red LED Digits
- Available in 4 or 6 Digit Versions
- Single or Dual Counter with Rate Indicator
- Programmable Scaling and Decimal Points
- Programmable User Input
- AC or DC Powered
- 5 AMP Form C Relay
- Aluminum NEMA 4X Case Construction
LDT
Large Display Timer and Cycle Counter
- 2.25" or 4" High Red LED Digits
- 6-Digit Bi-directional Timing Capability
- 5-Digit Cycle Counting Capability
- Selectable Timer Ranges and Operating Modes
- Elapsed Timer and Preset Timer Functionality
- Serial Communications (Selectable RS232 or RS485)
- Programmable User Input
- AC or DC Powered
- 5 AMP Form C Relay Output
- Aluminum NEMA 4X Case Construction item
LDA
Large DC Volt/Current/Process Display
- 2.25" & 4" High Red LED Digits
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 Amp Form C Relay
-Aluminum NEMA 4X Case Construction
-RS232/RS485 Serial Communications
- Universally Powered
LDSS
Large Serial Slave Display
- 2.25" or 4" High Red LED Digits
- Displays up to 6 Digits of Serial ASCII Data
- Dual Display Buffer Allows Alternating Displays
- Selectable RS232 or RS485 Serial Interface
- Connects Directly to Red Lion Products with Serial
- Programmable User Input
- AC or DC Powered
- Aluminum NEMA 4X/IP65 Case Construction
|
|
DF30 is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
Looking for a way to trim cost and save space? Check out Red Lion's CUB5 Panel Meters. The meters are less expensive and less than half the size of most standard 1/8 DIN panel meters. Less panel space and the ability to utilize smaller enclosures make these meters the perfect solution for any budget.
Don't let the size fool you...these meters are packed full of features! The large .48" (12 mm) display, optional single or dual set point control output modules, and optional RS232 or RS485 communication modules allow these meters to handle even the most demanding applications.
CUB5 Counter/Rate Indicator
CUB5I DC Current Meter
CUB5P Process Meter
CUB5RT RTD Meter
CUB5T Preset Timer and Cycle Counter
CUB5TC Thermocouple Meter
CUB5V DC Voltmeter
Optional cards:
- CUR5RLY (1 relay output module)
- CUR5SNK (module 2 NPN transistors - only for analog models)
- CUB5COM1 (communication RS485)
- CUB5COM2 (commnunication RS232)
|
|
OSD has been manufacturing and marketing Large Molecule passive matrix OLED products since 2003. These popular products have been designed into communication systems, industrial control systems and many types of consumer electronics. So, it is with great regret that OSD has announced it is withdrawing its entire PLED module line from the marketplace.
Recently several of the world's largest PLED panel manufacturers have announced their withdrawal from PLED production because of financial reasons. The withdrawal of these suppliers will have a direct effect on the availability of critical components that sustain OSD's PLED module production.
|
|
Bright LED display with 15 mm size
Master- and Slave operation with Baud rates up to 1 MHz
Easy to set up by two front keys and menu dialogue
Programmable scaling of display and free zero definition
Programmable bit blanking, round-loop mode and more
Aux. 24 V output for encoder supply
Standard housing 96x48x150 mm
115/230 VAC or 17-30 VDC power supply in one unit
|
|
A very powerful micro-controller manages and processes all the information [position, calculation, etc.] trasmitted by the transducers or entered by the user. Having such a highly evolved but user-friendly digital Readout means increasing the production performance of the machine on which it is installed considerably.
|
|
|
ADOS manufactures a wide range of weight serial repeaters that allow to find the best solution for all different industrial environments. Versions with current or voltage analog input are also available.
|
|
NOT RECOMMENDED FOR NEW DESIGNS.
Hexadecimal display containing a four-bit latch, decoder, driver, and 4 × 7 light-emitting-diode (LED) character with two externally-driven decimal points in a 14-pin package. The LED driver outputs are designed to maintain a relatively constant on-level current of approximately 5 mA through each LED that forms the hexadecimal character. This current is virtually independent of the LED supply voltage within the recommended operating conditions. The decimal point anodes are connected to the LED supply; the cathodes are connected to external pins.
|
|
Features
- 0.2INCH DIGIT HEIGHT.
- LOW CURRENT OPERATION.
- EXCELLENT CHARACTER APPEARANCE.
- I.C. COMPATIBLE MECHANICALLY RUGGED.
- GRAY FACE,WHITE SEGMENT.
- PACKAGE : 650PCS / REEL.
- MOISTURE SENSITIVITY LEVEL : LEVEL 4.
- RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
|
|
- We have 3.5" and 5.7" TFT LCD Module for Industry application
- Display Mode: Color TFT
- Pixels: 320(RGB)x240
- White LED Backlight, Digital interface
- Outline Dimension (mm): 126.08x101.54x4.74mm ---5.7"
76.9 x 63.9x3.2mm ----3.5"
- We also have optional control board for MCU interface directly and Touch panel for your choice.
|
|
Visualization with TFT :
MICRONOR work with the largest manufacturer in visualization together. By our own designing and assambly line we can offer a total solution to you, according to your requirements. In the following overview you can see the different vizualization techniques and products.
* TFT - Small Size in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
* TFT - Medium Size in the sizes of 3,5" to 10,4" with Backlight LED and Transmissive Display mode.
|
|
COMPACT ELECTRONIC DISPLAY UNIT
Quick Read family is made up of three slim, compact versions, each complete with analog and digital displays, and easily programmed via local keypad.
The 3-colour (green, yellow and red) analog display and 8-digit alphanumeric display provide clear definition and easy reading of the measurement results.
|
|
|
NAI offers a wide variety of industry leading angle position indicators and measurement instruments for the defense and aerospace markets. Its best-of-breed performance is delivered in a variety of accuracy and resolution grades, with various packaging options available. NAI also offers form, fit and function replacements for the obsolete DDC angle position indicator models AP-30610, AP-30611, AP-30710, AP-30711 and AP-30712.
|
|
|
The Acu-Rite 300S is a fully programmable 4 axes readout system, now available with a full color display. With the capability to store and create a library of programs the 300S is everything you need to create, edit and execute programs on your manual machine tool.
|
|
High Accuracy Lathe Packages
Fits Most Popular Lathes Up To 80
* Uncompromising accuracy and repeatablity X-axis display resolutions to 0.00002"
* Fits most popular lathes up to 80" between centers
* Display includes 9 tool offsets for increased productivity
* Optionally, a third scale can be installed on the compound for Z1 or Z2 measurements
* All brackets and hardware included for quick, easy installation
* Display: LH52-3 Scales: GB-A and SJ700
|
|
When display is connected to electric system consisting of AC controller, EPAS steering system, and vehicle master control unit, it enables us to see different information regarding the system.
I n f o r m a t i o n s e e n o n d i s p l a y
• Traction mode indication
• Battery discharge status
• Error code numbers
• Four different hour meters
• Which dig. inputs of AC controller are momentarily active (connected)
• Which dig. inputs of vehicle master control unit are momentarily active (connected)
• Software versions of all components connected in truck system
• EPAS torque, steering angle, battery current, battery voltage, AC motor voltage, phase currents, controller temperature, motor temperature...
• List of software parameters
|
|
Battery Discharge Display
The PowerGauge™ is a comprehensive range of Battery Discharge Indicators that can improve the productivity of your vehicle and minimize the potential for damage from operating outside the batteries optimum parameters.
All the PowerGauge™ products are micro-processor based with no moving parts, for improved reliability, The super bright 10-segment LED bar graph gives instant battery state of charge feedback under all light conditions.
|
|
Avago Technologies' Dot matrix arrays are capable of displaying a full range of alphanumeric characters and simple graphics when assembled in panels.
Dot Matrix Displays resires
- 5x7 Series
- 8x8 Series
- Rich Color Series
|
|
|
|
|
|
Lumitex uses sheets of fiber optic cloth to create LCD backlights of custom shapes, sizes and configurations. In a typical design, we use two or more layers of Woven Fiber Optic Cloth to form a rectangular light emitting area. This product is typically 0.068” (1.7mm) thick and anywhere from 1 sq inch to over 100 sq inches. The fibers coming off one end are then bundled into a circular ferrule and coupled to one or more LED light sources. An alternatives technology is our thinner UniGlo technology to create backlights as thin as 0.013” (0.33mm).
Lumitex Fiber Optic LCD BackLighting provides long life, low power, inert, maintenance free backlighting for all LCD and Display designs.
Longer Life - Durable fiber optic panel never needs replacement. Remote light source offers 10,000 to 100,000 hours life and easy replacement.
Lower Power - Sources require less power than EL, CCFL, or LED Array and no inverter. As low as 10-20mA at 2vdc
Compact Size - Panels are thin and sources are smaller than EL or CCFL inverters.
Heat/EMI Free - Fiber optic panel adds no heat or EMI to interfere with switch operation
Durable - Optical Fibers are not affected by extremes in humidity (0% to 100%) and temperature (-40 to +85 deg C)
Very Low Startup Costs - Minimal Engineering charge and usually no tooling. Low prototyping cost with no minimums.
|
|
|
|
|
|
2408i Universal Process Indicator and Alarm Unit
Accurate stable measurement of temperature, pressure, level, flow and other process variables are provided by the 2408i universal indicator. An optional second process value input allows the average, difference, minimum or maximum of two values to be displayed. Temperature linearization functions for nine thermocouple types and Pt100 resistance thermometers are selectable. Other input linearizations can be factory downloaded. Strain gauge and presssure sensor inputs can be energized from an internal 5 or 10Vdc supply. An automatic calibration routine is provided to remove zero and span offsets. For flow measurements, square root extraction is available as standard.
Features:
- Four alarm setpoints: For alert and plant protection
- Serial communications: For supervisory control and data acquisition
- DC retransmission: Fully isolated retransmission to remote control and monitoring equipment
- Second PV input: For monitoring auxiliary signals
- Strain guage input: For pressure monitoring
|
|
PAN3V
Format DIN 48x48
The PAN3V is a small economic panel especially studied for the starting cupboards or the electric control panels.
It makes it possible to announce :
- 3 gathered information.
- "Start, stop, default".
- "presence of the 3 three-phase tensions" of an electric departure.
Supply :
- Low voltage (12Vac/dc, 24Vac/dc, 48Vac/dc).
- Hight voltage (130Vdc, 220Vac, 380Vac).
Equipped with 3 removable indicators LED "high luminosity" (possible colors: green, yellow, red, blue, white), of its connector scewless removable, its test lamp optional outside, it is very easy to install and will save to you an precious time.
Option :
Lamp test output.
|
|
LED display
Mounting vertical
Segment height: 10 m
|
|
Series S302/SX302
Numeric and alphanumeric large size displays
Character heights 57, 100, 160, and 250 mm
Displays with brilliant red LEDs (optional blue, green, white)
Light reflecting display elements in LRD®-technology
Interfaces Profibus, Modbus, serial, parallel, analog; further interfaces on request
Single- or double-sided displays
Displays with dimension symbols
Set-up menu for setting parametersand operating modes
Equipment packages for outdoor applications
Protection type IP54 and IP65
|
|
|
The Model 1003 Transducer Indicator has been specially designed to operate with both DC and AC style LVDTs. It can also be configured to work with our Series 600 & 605 ADTs. This meter features a 5-digit display, high speed analog output, and optional RS232 & relays.
|
|
LEDI POOL DISPLAYS
Time + temperature zone display for swimming pool
The LEDI®POOL displays the temperature of the water for one or two baths and gives alternatively the time/air temperature information.
The LEDI®POOL can be installed in main entrance or in the swimming zone.
Complies to EMC Directive 98/366 EEC including directive 93/68. EN 55024, EN 55022, EN 60950
|
|
For the display of process data, Fuji electric offers a complete line of digital panel meters for all application.
A lot of functions or options (72x36mm or 48x96mm formats - current, voltage, thermocouple, RTD, frequency or pulses - Alarm and re-transmission output...) are available and allow to adapt to all applications.
|
|
XC-Boards®
Information systems for production and employee information
Information systems for production and employee information present production data, reduced to the basic essentials, directly at the place of production. Being legible over far distances, they provide the employees with a quick overview of the situation and motivate them to commit themselves personally to accomplish a set goal - motivation begins with information.
|
|
LEDICOM range: Electronic message displays
Works under a Web browser, no need of software installation. The display has it own IP address.
The LEDICOM series declines in 3 models:
- Model 4LTE : 4 lines of text + LCD 12” screen displays pictures and digital video transmission Loudspeaker included
- Model 4LTH : 4 lines of text + LEDI 4/60 clock blue & yellow LED lamps.
- Model 8LT : 8 lines of text
Text in VFGD technology, blue colour
Electronic message display to be directly put on a support, to be embeded or to be put on its (optional) stele. The case consists of a cube in elm and an aluminum box. Securit glass front.
|
|
|
|
