|
|
|
This digital panel indicator series accepts a wide range of input signals (process, temperature, pulse/impulse, weight, etc.), that can be displayed in any required value. It also includes a green/red colour change display feature, which clearly visualises the status of a process.
|
|
Programmable panel meter for process, temperature and load cells.
Size: 96x48x60 mm.
Tricolor display: ±19999 (4 ½ digits)
|
|
|
When your application calls for variable indication, Digital Panel Meters (DPM) are the right tool. Voltage, current, pressure, volume, temperature, frequency and other parameters can be monitored and displayed. With a variety of input and ouput options, DPMs can be used in most any application and the product's short depth makes it flexible and accommodating to panelbuilders' needs.
|
|
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
LED Matrix Displays
With series SGX500 a universal type range of innovative graphic
boards is available to the user.
Visualization of process data and graphic information are typical applications.
Perfect design
Designed for harsh industrial applications, the boards have
proved themselves in factory automation as well as in proces-
sing and process engineering.
|
|
Large Displays for process control
· Inputs: ±10V, ±0-20mA.
· Three digits size available : 57, 100 and 250 mm.
· From 2 to 5 digits, 1 or 2 displaying sides.
· Serial line option (RS232 or RS485) and dual relay output option.
|
|
The product featured on the photo is a CSTN display.
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
EAO, the expert in Man-machine Interfaces market a complete range LCD displays being able to be used in multiple applications.
The range of displays proposed by EAO Secme is very complete; the alphanumeric displays start with very simple displays of a line of 8 characters to versions offering 4 lines of 40 characters.
The graphic versions are they also many: since a line of 12 points to versions 320x240 points.
According to the applications and preferences of the customers, the displays can be backlighted or not, of color, used in beaches of wide temperatures...
Do not hesitate to contact us to obtain more information over this product range.
|
|
Powered by the process loop signal 4-20 mA.
Loop drop: 5 V max.
Size: 48x24x40 mm.
Display (red LED): -1999/9999
|
|
The digital indicator DI25 is a competitively-priced, multifunction instrument for a wide variety of measuring tasks.
The multi-function input has 18 different input configurations, which can be selected via the rear connections and also by selection the appropriate input signal with in the instrument configuration. In this way it is possible to connect transmitters with current or voltage signals, and both resistance thermometers or thermocouples to the same instrument.
The measured value can be retransmitted for further processing via an analogue 4 ... 20 mA output (standard) or via an RS-485 Serial Interface (optional).
Other analogue retransmission signals are also available as option.
The basic version of the DI25 indicator features three alarm outputs. Instruments with the optional 24 V transmitter power supply have two alarm outputs available.
With the high ingress protection of the fascia (IP66) the digital indicator DI25 can also be used under extreme operating conditions.
All configuration and programming can be done using the front control keys.
|
|
What is OLED?
Organic Light-Emitting Diode (OLED) Display Panel, or Organic Electroluminescence (OEL), possesses the new generation technologies that other flat displays are hard to accomplish –brighter and clearer full color images with more agile responding speed.
The advantages of using OLED
Wide Range of Visibility:
Good visibility from long distance & wide viewing angle
Small Size:
Thickness down to 1,8 mm possible & dot pitch size smaller than for any other
Image Quality:
High colour saturation, high contrast & high speed
Low Power Consumption:
Efficient transformation of electricity into light and low heat output
Operation at low temperatures:
Operates effectively under very low temperatures
Replacement OLEDs
We are now expanding our OLED range to include drop-in replacements for products recently discontinued by other manufacturers.
|
|
Product GK473 Gateway
Technical data - electrical ratings
Current consumption 10 years (flash / EEPROM)
Display 4 LED´s as operating status indicators
Emitted interference DIN EN 61000-6-4
Interface to SPA EIA RS485 (ASCII protocol)
Interfaces CANopen
DeviceNet
Profibus-DPV0
Interference immunity DIN EN 61000-6-2
LED operating status DP (green) fieldbus operating status
DP (red) operating and error status
RX / TX (yellow) receiving / transmitting a token (RS485)
Programmable parameters Auto-Check functions
Auto Scan SPA
Auto Message SPA Position
Auto Message SPA Error
Supply voltage range 12...24 VDC
Other products available:
|
|
|
"True Vision, Innova 40i" the best DRO in the world. It is easy to operate and absolutely reliable; it represents a new technological breakthrough in measuring and control systems for the machine tool.With its exclusive color TFT screen, it is possible to simulate the programmed part in 3D, with an unmatched view from any angle; a considerable advance from the monochrome LCD screens on the market today.
|
|
Position-controlled tightening
The wide diversity of models in tightening technology which offer solutions to all tasks and demands were a spur for us to match this diversity and create made-to-measure solutions for positioning demands.
The systems are fully developed and offer made-to-measure solutions for almost all applications.
Functional principles
Tightening positions (x- / y- values) of the linear system are collected via encoders. The values of the encoders are electronically analyzed and processed. To meet demands and requirements, varying analysis systems are available.
PAS 1000
The system is a simple, robust analyzing and control unit and is, together with an incremental encoder, particularly cost-effective. Costly visualization is dispensed with. The system is especially suitable for standard and "stand alone" applications.
Programming couldn't be simpler. The PAS 1000 is easily connected and up and ready in a matter of minutes. The PAS 1000 is mainly used with smaller torque arms such as the LE 40 (40 Nm). It can of course also be used together with all other torque arms.
The picture shows PAS 1000 together with torque arm LE 80 PAS. The torque arm ist not included in the delivery range and needs to be ordered separately.
|
|
Position-controlled tightening
The wide diversity of models in tightening technology which offer solutions to all tasks and demands were a spur for us to match this diversity and create made-to-measure solutions for positioning demands.
The systems are fully developed and offer made-to-measure solutions for almost all applications.
Functional principles
Tightening positions (x- / y- values) of the linear system are collected via encoders. The values of the encoders are electronically analyzed and processed. To meet demands and requirements, varying analysis systems are available.
Position control PAS 2000
Just like PAS 1000, PAS 2000 is a compact system which can be put into operation immediately without any particular programming know-how. It is delivered ready for connection so that set up by one of our staff is unnecessary.
The picture shows PAS 2000 together with torque arm LE 150 PAS. The torque arm ist not included in the delivery range and needs to be ordered separately.
|
|
The newest generation of digital readout systems, the ACU-RITE 200S, features exclusive crystal clear LCD display technology. This technology replaces the traditional LED and VFD displays still used by other manufacturers. The 200S features a 5.7", 320x240 resolution transmissive LCD display, the latest in flat screen technology.
The 200S milling LCD readout system is now totally intuitive as all prompts, instructions and help functions are now visible as text or graphics on the screen. In addition, all standard routines are now visible on the screen with graphics to guide the user through simple questions. It is no longer necessary to constantly refer to a manual or memorize codes, to access the functionality of the 200S system.
Available in the same LCD readout as a 2- or 3-axes display, the 200S for milling comes complete with bolthole pattern calculations for full and partial circles with graphics, zero reset and preset features, tool diameter compensation, near zero warning, and every other operating feature available in ACU-RITE's previous DRO product lines.
The 200S provides the NEW STANDARD of productivity for manual milling applications!
|
|
Accept any voltage or current process signal.
Size 96x48x60 mm.
Display: -9999/9999 (4 digits)
Excitation output to feed the transducer @24V
|
|
Endress+Hauser has led the industry in the development of system components such as controllers, digital
communications, displays, power supplies, barriers, samplers, recorders and isolators.
We will offer a comprehensive range of hardware and software products that enable its measuring devices to be quickly and economically integrated into process automation systems. These include:
Power supplies and barriers
Gateways to bus systems
Indicators and registration devices
Recorders
Process management software
Asset management software
|
|
Digital Process Indicators - DPI 270/280 Series
The versatile DPI 270 (miniature) and DPI 280 (general) series of digital process indicators are smart instruments for use with a wide range of process sensors and signal inputs.
When used with the Druck range of pressure transducers or transmitters, a direct reading in pressure is provided. The DPI 284/5 internal pressure sensor can be supplied up to 60 bar or external pressure sensor up to 700 bar . Direct input of thermocouples and PT 100 resistance thermometers is available for temperature monitoring.
Features & Benefits:
High accuracy ±0.01% F.S.
Wide range of process measurements
Extensive range of programmable features
Built-in sensor energisation
RS 232/485 and analogue interfaces
IP65 sealed front panel
|
|
Process indicator for :
- analogue signals (GSI40)
- temperature signals (GSI41)
- process signals (GSI48)
Panel mounting solution
|
|
FEATURES
- Lighted, supertwist, 20x4, LCD display.
A wide-temp LCD display or a vacuum-fluorescent display (VFD)
are available as options.
- 24- or 40-key keypads with software-controlled shift and
status LEDs.
- EIA-232, EIA-422, EIA-485 or 5-volt Buffered serial interfaces. Each interface supports software handshaking.
- 512 Kbytes (1024 Kbytes optional) of nonvolatile flash memory; 256 Kbytes (768 Kbytes optional) available for user program and data storage.
- Handheld with battery back housing
- Meets NEMA-12/13 requirements.
- User-programmable operator interface terminal for applications where
a dumb terminal is not suitable.
- Simple, but powerful BASIC programming language allows you to easily
add custom functions to the terminal.
- An optional real-time clock can be purchased to execute elapsed-time
or time-of-day event code and timedate stamping.
- An optional secondary serial port is available. Communication through
this port is controlled by your software.
- The QTERM-R55 uses a switching regulator and operates from 8 to 32
VDC.
|
|
- Handheld Readouts.
- Made from a Lightweight Aerospace Alloy.
- Available Hermetically sealed for use in wet conditions.
- Tare, Peak and Reset facility.
- Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
- All units are calibrated to comply with ISO 7500-1: 2004.
- The accuracy of the cells are better than 1% of applied load.
- The power source is a 9V PP3 battery, can be supplied for
mains power if required (240v).
- 12 Month Guarantee, subject to conditions.
- Complete with carry case.
|
|
1/8 DIN Standard
The K3MA series consists of a process indicator, a frequency/rate indicator and a temperature indicator. All models are equipped with a highly visible LCD display with 2-colour (red and green) LEDs, have a 96 x 48mm front housing and the same short depth of 80mm.
|
|
FEATURES
The A200E is a weight amplifier indicator based on a microcontroller. All the operations of configuration and weight calibration are done by front keyboard. The instrument is equipped with a main display to show weight and an auxiliary display to show the operator guide messages. The base version foresees three digital inputs, three digital outputs and two serial line outputs, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). Options allow to expand the number of digital outputs from three to eleven ( S and D versions) and with options V or A it is possible to have an analog optoisolated output configured for 0-10 V or 4-20 mA. The A200E is equipped with a real time clock that allows to include date and time on printing reports. According to several applications, ADOS supply software versions for multicomponents batching and /or complex weighing process systems.
APPLICATIONS
Static weighing system
Multicomponents batchings
Testing machines
|
|
Multifunction weighing indicator series JOLLY.
Six different operating modes selectable by the customer :
1. Weight indicator with two alarm thresholds normally activated
2. Loading: batching of 1 product with two speeds
3. Loading: batching of 2 products in succession
4. Unloading: batching of 1 product with two speeds
5. Unloading: batching of 2 products in succession
6. Weight indicator with one alarm threshold normally deactivated
|
|
Basic functions of indicator series PUE C41H:
- Measuring units: [g], [kg], [N], [ct], [lb], [oz];
- Automatic dosing: single and dual threshold;
- Creation of mixtures according to set formulation;
- Tarring in whole measuring range;
- Automatic tare, tare memory, manual insertion of tare mass;
- +/- control with reference to standard mass;
- Percent deviation with reference to standard mass;
- Averaging of weighing result, digital filter;
- Control of Power Supply from batteries;
- Backlit adjustment while supplying from battery;
- Timer switch off;
- Adjustable speed of transmission in range between 1200-115200bit/s;
- Continuous transmission of data by RS 232;
- Manual or automatic mode for RS 232;
- Weighing loads with switched off autozero function;
- Measurement of maximal force influencing the weighing platform;
- Measurement of force influencing the weighing platform in Newtons;
- Control of starting mass;
- Possibility of connecting additional LCD display;
- Summing of weighing.
- Modular construction (depending on needs, electronic set can be
extender by additional modules installed inside the indicator casing)
|
|
High accuracy weighing indicator with 6 digit LED display
FEATURES /
- Inventory and batching control terminal
- High sample rate, up to 70 samples per second
- Up to two serial ports with printing and networking
(one standard)
- Analog output (optional)
- Two opto-isolated weight setpoints
- Large 6 digit LED display
- Alibi (Flash) memory for last 10,000 transactions
- OIML R-76 and NTEP approved to 10000d
- Panel mount IP40 enclosure
- IP54 front panel cover (optional)
- Input power 24VDC
|
|
TYPE: LCD-COG-module LCD-DATA:FSTN-mode transflective / positiv graphic
BACKLIGHT: LED edge amber CONTROLLER: SSD1815 ; FEATURES: COG module with special shaped glass + special shaped FPC ; REFERENCE NO. 123 ; TYPE: LCD-module LCD-DATA:FFSTN-mode transmisive / negative
alphanumeric + segment BACKLIGHT: bicolor LED red and yellow-green
CONTROLLER: KS0066 FEATURES: LCD + Backlight + tact switches +
customers circuitry REFERENCE NO. 090
|
|
|
