|
|
Product GK473 Gateway
Technical data - electrical ratings
Current consumption 10 years (flash / EEPROM)
Display 4 LED´s as operating status indicators
Emitted interference DIN EN 61000-6-4
Interface to SPA EIA RS485 (ASCII protocol)
Interfaces CANopen
DeviceNet
Profibus-DPV0
Interference immunity DIN EN 61000-6-2
LED operating status DP (green) fieldbus operating status
DP (red) operating and error status
RX / TX (yellow) receiving / transmitting a token (RS485)
Programmable parameters Auto-Check functions
Auto Scan SPA
Auto Message SPA Position
Auto Message SPA Error
Supply voltage range 12...24 VDC
Other products available:
|
|
|
|
|
|
The newest generation of digital readout systems, the ACU-RITE 200S, features exclusive crystal clear LCD display technology. This technology replaces the traditional LED and VFD displays still used by other manufacturers. The 200S features a 5.7", 320x240 resolution transmissive LCD display, the latest in flat screen technology.
The 200S milling LCD readout system is now totally intuitive as all prompts, instructions and help functions are now visible as text or graphics on the screen. In addition, all standard routines are now visible on the screen with graphics to guide the user through simple questions. It is no longer necessary to constantly refer to a manual or memorize codes, to access the functionality of the 200S system.
Available in the same LCD readout as a 2- or 3-axes display, the 200S for milling comes complete with bolthole pattern calculations for full and partial circles with graphics, zero reset and preset features, tool diameter compensation, near zero warning, and every other operating feature available in ACU-RITE's previous DRO product lines.
The 200S provides the NEW STANDARD of productivity for manual milling applications!
|
|
FAGOR Innova series DRO's represent a technological breakthrough in measuring and control systems for machine tools offering high quality and features at very competitive prices.
With tailored solutions
Innova series DRO's offer a great deal of standard features, some of which only FAGOR can offer and they adapt to the specific requirements of each application in order to obtain greater productivity from milling machines, boring mills, lathes, grinders and other applications.
FAGOR's new "TrueVision"
Following the feature looks of the Innova series, FAGOR presents their new 40 i DRO with an exclusive color TFT screen that displays programming assistance and solid graphics making it a lot easier to work on the various machines that may be equipped with it.
Its great viewing angle from any point of view makes this "TrueVision" the best on the market.
|
|
|
As the market leader in precision measuring devices, Acu-Rite products have consistently set the standard of innovation for nearly 50 years. Proudly designed and manufactured in the USA, Acu-Rite products retain a tradition of superior quality and are preferred by machine tool builders worldwide.
|
|
Digital Process Indicators - DPI 270/280 Series
The versatile DPI 270 (miniature) and DPI 280 (general) series of digital process indicators are smart instruments for use with a wide range of process sensors and signal inputs.
When used with the Druck range of pressure transducers or transmitters, a direct reading in pressure is provided. The DPI 284/5 internal pressure sensor can be supplied up to 60 bar or external pressure sensor up to 700 bar . Direct input of thermocouples and PT 100 resistance thermometers is available for temperature monitoring.
Features & Benefits:
High accuracy ±0.01% F.S.
Wide range of process measurements
Extensive range of programmable features
Built-in sensor energisation
RS 232/485 and analogue interfaces
IP65 sealed front panel
|
|
1/8 DIN Standard
The K3MA series consists of a process indicator, a frequency/rate indicator and a temperature indicator. All models are equipped with a highly visible LCD display with 2-colour (red and green) LEDs, have a 96 x 48mm front housing and the same short depth of 80mm.
|
|
|
|
|
|
FEATURES
The A200E is a weight amplifier indicator based on a microcontroller. All the operations of configuration and weight calibration are done by front keyboard. The instrument is equipped with a main display to show weight and an auxiliary display to show the operator guide messages. The base version foresees three digital inputs, three digital outputs and two serial line outputs, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). Options allow to expand the number of digital outputs from three to eleven ( S and D versions) and with options V or A it is possible to have an analog optoisolated output configured for 0-10 V or 4-20 mA. The A200E is equipped with a real time clock that allows to include date and time on printing reports. According to several applications, ADOS supply software versions for multicomponents batching and /or complex weighing process systems.
APPLICATIONS
Static weighing system
Multicomponents batchings
Testing machines
|
|
Multifunction weighing indicator series JOLLY.
Six different operating modes selectable by the customer :
1. Weight indicator with two alarm thresholds normally activated
2. Loading: batching of 1 product with two speeds
3. Loading: batching of 2 products in succession
4. Unloading: batching of 1 product with two speeds
5. Unloading: batching of 2 products in succession
6. Weight indicator with one alarm threshold normally deactivated
|
|
For all activities, our indicator range give you many possibilities.
Laid on table, with column kit or wall mounting kit, our indicators are easy to use and very reliable.
The whole range is available either in stainless steel or in resin and can be connected to all Precia Molen load receptors.
|
|
Series S302
Displays for the weighing technology
Character heights 57, 100, 160 and 250 mm
Brilliantly red shining LED display
Light-reflecting displays in LRD®-technology
Displays with 4 or 5 digits
Dimension symbol (g, kg, t) fixed or electrically controllable
LED display with status indicator (NET/-0-)
Unit versions with infofield
Serial interface
Compatible with various types of weighing systems
Protection type IP54 and IP65 (option)
|
|
200s readout systems
As the industry standard in digital readout systems, the Acu-Rite 200S offers state-of-the-art features for milling, turning and grinding applications.
# 2 or 3 axes 5.7” Transmissive LCD display
# Job Clock
# Feed Rate Display
# Multiple Language Support
# Absolute/Incremental
# Near-Zero Warning
# Help Function
# 16 Tool Offsets/Diameter
# Preset and zero reset
# 4 Function Calculator/Trig Calculator
# Instant Inch/mm conversion
# Position-TracTM
|
|
ACU RITE RADIAL makes its radial drill still faster!
ACU RITE radial
Those, high performance position display for radial and high-speed radial drills, which can be served easily.
The collection of the machine motion is made by means of a ACU RITE length measuring system at the arm and - usually - by a friction wheel system at the column. With the help of a further measuring system at the guide also the drilling depth can be measured and indicated.
|
|
OSD020AMQCIF-C:
- Diagonal Size: 2.0 inch
- Resolution: 176 x RGB x 220
- Overall Dimensions: 37.3 x 50.25 x 1.6 mm
- Color(s): 262k
- Interface: Selectable MPU 18/16/9/8-bit
|
|
Simple Batrix Weighing of balance and platform
3000 levels Except legal metrology
Our range of indicators offers to you a vast choice for all the activities of weighing.
Conceived to be used in any situation they can be posed on a table, fixed at the wall or assembled on column and are for the majority available is out of resin or out of stainless and naturally they can be connected to all our range of receivers of load.
|
|
Profile:
Founded in 1967, Setra Systems, Inc. is a leading designer and manufacturer of pressure, acceleration, and weight sensing devices. Setra has devoted its engineering and research efforts to the development of transducers and systems based on the highly accurate variable capacitive transduction principle. Setra Systems was acquired in December 2001 by Gems Sensors of Plainville, Connecticut. Gems Sensors designs, manufactures and markets liquid level, flow and pressure sensors and controls and is a division of the Danaher Industrial Controls Group since 2004.
Products:
Process Automation & Sensing Controls: Sensors: Accelerometers, Digital Displays, Weigh Systems, Digital Manometers, Transducers
Digital Systems,
|
|
|
Forge Europa is renowned as a leader in the field of high reliability numeric LED displays. We offer a wide range of standard 7 segment displays in both single and multiple digit formats with character heights ranging from 7.6 mm (0.3") to 200 mm (7.9").
|
|
ED-07.CA-R - EUROLED SMD 7- Segment Display, Common Anode, Red, 624nm
EUROLED SMD 7-Segment Display, red, Common Anode,
Brilliant light output
Only 4 mm total height
Withstands high solder treatment
For all miniature applications
On 24 mm blister tape
|
|
|
Forge Europa dot matrix LED displays are widely used in graphics and moving message applications.Standard configurations include 4 x 4, 5 x 7, 5 x 8, 8 x 8 and 16 x 16 with display heights ranging from 18 mm (0.7") to 121.5 mm (4.8"). Interlocking versions are also available for accurate positioning of multiple displays.The Standard Dot Matrix are supplied with white dots/grey faces.
|
|
|
The 16-channel thermocouple monitor designed to read, scan, print and log temperatures or voltages. You can use any one of seven standard thermocouple types to read temperatures from -200 °C to +1700 °C. For remote monitoring applications, the SR630 can time-stamp and store up to 2000 readings in non-volatile memory for later analysis.
|
|
We offer an extensive range of high quality off-the-shelf 7 segment LCD panels, with a wide range of character heights and applications in mind.
These displays can be provided with or without metal pins for easy interconnection to your product. If there are specific icons and sizes that you require other than those shown our low cost custom design service can create ANY type of display you can think of!
|
|
|
|
|
|
LED strip indicator 584
The "semi-analog" LED strip indicator displays the measured value using 71 LEDs. This indicator is designed to withstand very stong vibrations yet has the familiar look of an analog indicator.
The two standard housing sizes and flexible inputs make the indicator a universal solution for all applications with increased vibrations.
Developed for large diesel engines, the indicator can be used directly on ships' engines (GL-approved models are available) and on any machine or system where high vibration resistance is required.
Ships' engines
Large engines
Pavement cutters
General road construction machinery
Turbines
Shredders
Rock crushers
Strainers
Features:
LED indicator (71 LEDs + 1 power ON)
1.5% accuracy
Display on 320° arc
Sturdy metal housing
Special design for strong vibrations
100mm or 96x96mm with changing scale
Inputs: Voltage input 0-10V
Current inputs: 0-20 / 4-20 mA
Frequency input: 0-10 Hz / 0-20kHz (PNP/NPN)
Sine wave input (e.g. for inductive sensors)
Fine tuning of +/- 10% possible
Options:
Acceptance from shipping certification agencies available on request.
|
|
ALPHAPremiere 9000 Series Displays
*Tricolor, Ethernet-ready LED displays
*Built-in speakers w/volume control, ext. speaker jack
*Supports Graphics: example.
*Sound Event Notification samples (.wav) Sound1, Sound 2.
*Currently used in retail, service, factories, warehouses.
Available in 5, 5-line models:
Premiere 9080C (shown below)
80 x 32 pixels
|
|
|
|
|
|
What is TFT?
Short for thin film transistor, a type of LCD flat-panel display screen, in which each pixel is controlled by from one to four transistors. The TFT technology provides the best resolution of all the flat-panel techniques, but it is also the most expensive. TFT screens are sometimes called active-matrix LCDs.
The advantages of using TFT
High Pixel Density: > 100 ppi
Scalable Resolution: from 128 x 128 dots to SXGA
Crisp colours: high colour saturation & high contrast
Excellent readablity:
due to high contrast and wide viewing andle
Portrait/Landscape support: by use of symmetric viewing cone
Multimedia capability: high speed
Applications of OLED technology
Today TFT displays are used in number of devices that require electronic display panel. Among most popular types of application are:
• Communications;
• Industrial;
• Marine;
• Consumer;
• Office equipment;
• White goods;
• Dynamique information displays;
This type of display can be used for almost any possible type of application due to versatility of its features and high level of electro-mechanical properties.
|
|
Digital Readout
A complete system consists of one or more Linear Encoders, commonly referred to as scales, and a Digital Readout.
The Linear Encoder monitors the machine travel and the Digital Readout (DRO) displays the distance moved or machine table position to the operator.
The axis display is large and clear and the keyboard is designed to be easy to use.
Many functions can be taken off the keyboard to support the work at the machine.
Depending on application you can choose between different versions of the readout.
|
|
Complete Display Solutions
In a world where consumer demand for information is burgeoning, Densitron ensures that the display solution brings the product capabilities to life.
Densitron actively works with our client partners and consumer research organisations to deliver exciting product display solutions for the designs of tomorrow.
We have extensive experience in design and manufacture of customised display modules as well as standard colour and monochrome display solutions for electronic devices. We are also proactive in the development of the product and packaging to provide a complete turn-key solution.
|
|
|
|
|
|
The AlphaEclipse™ RoadStar™ series is designed for maximum visibility along highways, highly elevated installations, or any application requiring long distance visibility. Its unique, modular, state-of-the-art design produces a dynamic advertising message center that is highly energy efficient, easy to operate, install and service.
* Character sizes from 17.5" to over 9' feet tall
* AlphaNet™ software included with exclusive user tutorial CBT (computer based training) program
* Five-year limited factory depot warranty
* PureColor™, exposed LED pixel design enables optimized readability
* Convenient calendar scheduling of messages
* Display text, graphics and animations (BMP/GIF)
* Front access to all electronic components
* Modular design enables fast delivery
* Over 200 sizes from 1.5' x 5' to 14' x 46'
* Convenient PC control from home/office
* Wired or wireless connectivity
* 256 shades of red or amber
* Protector™ case keeps out external contaminates
* No filters to maintain and clean
|
|
Electroluminescent glass is now available for "Glass Only"-projects as well as ready displays. Operating temperature of the glass is -100° ~ +100° C. Planar has produced over one million EL displays for rugged military, medical and industrial products.
Our proprietary ICEBrite (Integral Contrast and Brightness Enhancement) technology offers unparalleled image quality in a wide range of challenging visual conditions.
As a display material, you can develop the electronics to fit your exact needs. We even offer engineering design services to support your team in developing the electronics and interface solutions for your OEM product.
|
|
A better way to communicate with your customers
LIGHT, COLOR and MOTION are combined in the new ALPHA Window Display to attract the most attention, and drive more customers into your store.
This ideal indoor window display has message impact from a distance of 15 to 200-feet, day or night. Our patented display design with pixel "hoods", increases image contrast and provides shading from the sun. We use our own super-bright LEDs and a 4-inch character to create a sizzling, moving messages you know your customers won't miss
|
|
|
|
|
|
CA 306 and PB 306: Simple preset units with front thumbwheel switches, for easy remote setting of single parameters (i.e. setspeed of a drive) via fieldbus. By pressing the ENTER button, the actual BCD setting will be transmitted to the selected register of the target unit as PDO or SDO (CANBUS) or hold in the polling register for readout (PROFIBUS)
Front dimensions 96x48 mm
CA 340 and PB 340: Simple indicators unit for remote display of all register data which are available on the network. The use of this display can provide operator information about any of actual process data or parameter settings, at any place around the machine. The CAN version is able to handle PDO objects as well as SDO objects.
Front dimensions 96x48 mm
Bright 6 decade LED display with 15 mm size
CA 541 and PB 541: This unit combines both, preset switch and indicator. Whilst the BCD switch allows to make register changes via fieldbus, the LED display provides information about the actual setting of the same or any other register.
Front dimensions 96x72 mm
Bright 6 decade LED display with 15 mm size
|
|
|
|
|
|
The LHL, LHI meets or exceeds factory Mutual (FM) Approval Standard temperature Limit Switches Class 3545.
They are designed to automatically shut down a process when the measured value exceeds a pre-programmed value.
Alarm masking:
Puts the alarms in the stand by condition (mask) during instrument power up or masks a deviation or band alarm if the alarm condition is a
result of a set point change. In both situations the instrument maintains the alarm masking for the duration of the alarm condition.
Logic input:
These instruments are equipped with a logic input used to acknowledge an alarm condition by an external contact.
Maximum and/or minimum data hold:
The LHI is able to memorize the maximum and the minimum measured value. This function is automatically enabled at instrument power up
and it is always active.
Power supply failure indication:
These instruments are able to signal if a power failure occurs during normal instrument operation.
Power fail recovery settings are user configurable.
|
|
|
|
