|
|
- Product designed and produced by Topway ourselves.
- Character (Alpha Numeric) display.
- Characters x Line (5x8 format):
8 x 1, 8 x 2, 16 x 1, 16 x2, 20 x 2, 20x4, 24 x 2, 40 x2
- LCD Mode: STN-Blue, Grey, YG, FSTN-Pos. Neg. as option
- LCD Controller: KS0066 or Equivalent
- We have full product line with different module size, display model, 3v/5v power supply as options. |
|
| As we have solid experience on LCD module design, we also can support you on customized LCD module per all kinds of your request (either TN, STN, FSTN module), just send us your techinical specification, let us assist you on the following. |
|
PRODIS-ADC: Digital Process Meter from ASM
The PRODIS® product family consists of digital process meters with a 6-digit LED display, developed and produced by ASM, a leading manufacturer of linear and rotary position sensors. PRODIS-ADC is a process meter designed especially for sensors with an analog output.
PRODIS-ADC is designed for use with analog position sensors to display angular and linear displacements. A high resolution A/D converter processes the signals from sensors with a voltage output 0…10 V, current output 0/4…20 mA or voltage divider output.
The meter is programmable to display values within preset start/end range or values in units as inches, mm or degrees. A tare function or programming lock can be activated with two control terminals.
The sensor excitation is supplied from the meter. With four membrane keys, all parameters can be programmed for signal evaluation, scaling and output function. Optional comparator functions are available with 4 NPN open-collector outputs and 2 NO/NC relay outputs.
|
|
2 products to suit all your need in remote displaying : ATT 300 and ATE 300.
• ATT300 : can work with any current or voltage input of any transmitter : pressure, humidity, temperature, air flow, air velocity...
Display : -9999 to 99999
Display of the reading : 5 matrix digits
Display of units : 4 digits
Power supply : 24 Vac/Vdc
Analog inputs : 3 x 4-20mA, or 3 x 0-10V, or RS232 + one current or voltage input.
Housing : Stainless steel, IP65
Output : RS232
Modbus system (RS485 network)
•ATE 300 : can display 3 parameters (for example humidity, temperature and pressure). Can be installed flush-mounted or wall-mounted.
Display : -999 to 9999
Display of the reading : 4digits/7segments
Display of units :4 digits/14segments
Power supply : 24 Vac/Vdc
Analog inputs : 3 x 4-20mA, or 3 x 0-10V, or RS232 + one current or voltage input.
Housing : IP65
Output : RS232
Modbus system (RS485 network) |
|
The ATE300 is a multichannel indicator specially dedicated to flush-mounting (or wall-mounting) installations.
• Alternating display of 1 to 3 parameters
• 3 analogue inputs : 3 x 4-20mA or 3 x 0-10V
• 1 RS 232 digital input for KIMO external transmitter (class 200 & 300)
• 1 RS 485 digital input/output (Modbus protocol integrated)
• 22 pre-set units and 3 configurable units
• Configuration via software or remote control
• Electroluminescent front display, made of brushed stainless steel or white
lacquered
|
|
Features:
Simple low cost indicator with front dimensions 48x24 mm
and LED size 8 mm
Power supply 10 ... 30 VDC
Analogue inputs 0-10V, 0-20 mA and 4-20 mA
Display range -19 999 to 99 999, adjustable zero and full scale value,
14 bits of resolution
Latch input to freeze the display, minimum/ maximum record memory
Easy to set up by only two front keys and menu support
Delivery includes adapter frame for 50x25 mm cut out and
label set with dimensions |
|
Digital display unit (DA 10), also available with additional relay output
(DA 12/14), for electronic transducers.
Display
5-digit graphic LCD display, backlit
(white), text-based user interface,
user interface language selectable
(German/English/French), selectable
units of measurement.
Measuring range
±99.999 digits (min. and max. fully adjustable) |
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
Product ISI36
Technical data - electrical ratings :
Accuracy 0...0.05 %
Approvals UL/cUL
CE conform
Backlit 24 VDC ±20 %, 50 mA
Control NPN
PNP
Floating contact
Counting frequency 7 kHz, 12 kHz, 30 Hz
Digit height 8 mm
Display LCD, 7-segment display
Display range 0...12000
Display refresh 1 s
Emitted interference DIN EN 61000-6-4
Function Tachometer
Frequence display
Input logic NPN / PNP coded by wire jumper
Interference immunity DIN EN 61000-6-2
Measuring principle Gate time measurement 1 s
Number of digits 8-digits
Power supply lithium battery (approx. 8 years at 20 °C)
Unit displayed 1/s
Other products available: |
|
Readouts series VD3 and VD4 display voltage, current, speed, angular or linear positionss and any physical or chemical measure which can be converted into an electrical signal.
All the different availble versions can read analogue or digital signals alike.
The indicators series VD4 avail on front parameter-entering keys and on two relay-outputs with threshold alarms on the displayed variable. |
|
FUTEK products include Sensors, Cables, Digital Displays, Signal Conditioners, Accessories, and Sensor Verification Systems just to name a few.
Once a particular Futek Transducer has been chosen for a given application, provisions must be made for appropriate excitation and for conditioning the output signal. The nature of the conditioning depends on the electrical characteristics of the transducer and the destination of the signal.
FUTEK related Signal Conditioners with Digital Displays are as follows:
1) IBT100 Bench Top Rotary Torque & Angle Digital Display
2) TEDS Capable IBT500 Bench Top Signal Conditioner with Digital Display
3) IHH300 Hand Held Portable Signal Conditioner with Digital Display
4) TEDS Capable IPM500 Panel Mount Signal Conditioner with Digital Display
5) IPM600 Color LCD Touch Panel Signal Conditioner with Digital Display
6) EXCLUSIVE TEDS Capable Verification Calibration (VCAL) System ONLY offered at FUTEK
|
|
Examples:
-JUMO di 308 Digital Indicator, microprocessor-controlled, with max. 2 inputs, wide range of expansion options, panel-mounting DIN housing, bezel 96mm x 48mm (70.1550)
Configurable process display text (max. 24-character running text)
Alarm signal text with color changeover green-red (also as running text)
Up to two configurable analog inputs
Three option slots
Math and logic module (option)
4 limit comparators
Fast and convenient configuration through setup program
RS422/485 interface (option)
PROFIBUS-DP interface (option)
cUL/UL approval applied for
-JUMO di48 indicating instrument, programmable via PC Setup with voltage output 24V DC / 45mA, bezel size 96 x 48mm (70.1520/95.1520)
configuration from PC through setup program
electrically isolated measurement input (setup is not isolated from the measurement input)
many different inputs possible: resistance thermometer in 2-/3-/4-wire circuit, thermocouple, resistance transmitter, standard signals, potentiometer in 2-/3-/4-wire circuit
internal cold junction
customised linearisation
offset correction
input filter for interference suppression
24 V supply for 2-wire transmitter
|
|
New PAX Lite Model with Relay Outputs : PAXLA
The first in a new series of PAX Lite panel meters has just been released. The new PAXLA can accept DC current, DC voltage, or process input signals, and scale them to a desired readout. This new model also has two form "C" relays capable of switching up to 5 amps, providing complete dual setpoint output control capability!
Flexibility has been built-in to the power supply as well. The newly designed universal power supply accepts 50 to 250 VAC or 21.6 to 250 VDC and provides 24 VDC output for sensor power.
Combining dual setpoint capability, the universal signal input and power requirements, and a low PAX Lite price, the new PAXLA offers exceptional value in a panel meter!
- 5 Digit, 0.56" High Red LED Display
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 AMP Form C Relay
- Universally Powered
- NEMA 4X/IP65 Sealed Front Bezel
- Optional Custom Unit Overlay with Backlight
- Minimum and Maximum Display Capture |
|
The DMP200 series consists of four universal input indicators offering unparalleled price and performance. The use of surface mount components and modern microprocessor technology has enabled powerful features to be packed into a standard 1/8 DIN case.
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. The "Fast-Cal" feature provides a fast and simple means of calibrating an indicator to the transducer at any two stroke positions. |
|
A comprehensive range of high accuracy multi function digital metering systems offering measurement, display and communication of over 100 parameters, including true RMS measurement for total harmonic distortion and power quality data. Integra products are fully programmable via a simple menu driven interface and can be integrated into energy management systems via various communication protocols. To suit requirements, Integra offers pulsed, analogue and digital output options, and a choice of DIN, ANSI and JIS case styles, with high quality LED or LCD display.
|
|
PAX Series : Large range of Intelligent panel meters
The PAX Meter is the workhorse of our panel meter line-up. From its sunlight readable display to the wide variety of field-installable options cards, the PAX Meter will easily handle your application requirements. Select from the widest range of inputs in the industry, including models for both digital and analog signals. Their Comms capability allows data collection at various points of the machine and communicates the information to your management system, while still providing the machine operator with a localized display. Installing a complete system? Learn how to put a PAX Meter to work for you.
PAXC - Counter
PAXCK - Timer & Real Time Clock
PAXD - DC Volt & Current Input
PAXDP - Dual Process Input Meter
PAXH - AC True RMS Voltage and Current Meter
PAXI - Counter Rate Meter
PAXP - Process Input Meter
PAXR - Rate Meter
PAXS - Strain Gage Input
PAXT - Thermocouple & RTD Panel Meter
PAXTM - Preset Timer
Display of 5 LED digits of 14mm, with variable intensity for good outdoor readability (factor 1 to 15)
These intelligent solutions can be enabled with optional plug-in cards, for set point alarms (2 or 4),analog output and communications (RS232, RS485, Modbus, Devinet, Profibus), enabled Ethernet via external module (ICM8) |
|
Strong portfolio of electroluminescent display solutions and broad selection of high-bright, rugged and open-frame displays: Planar has the right embedded display for your particular application.
When you need EL display solutions, no one offers more experience, more expertise or more innovation than Planar. From our pioneering research that brought the technology to life 20 years ago to our continued commitment to providing our customers with the right solutions for their demanding applications, we create EL displays you know you can count on.
Learn more about Planar's embedded display solutions at http://www.planarembedded.com where you can access white papers, application notes, case studies and our engineering team's blog all in one place.
|
|
| SIKO electronic displays are freely prgrammable via robust, front-sided membrane keyboard ensuring an easy and flexible adaptation for displaying different measured values. Depending on application, compact, simple units or multi-functional displays with RS485 interface are available. |
|
- All product designed and produced by Topway ourselves.
- Graphic (full dots) LCD display.
- All kinds of resolution:
160 x 32, 202 x 32, 128 x 64, 192 x 64, 192 x 128, 240 x 64, 256 x 64,
240 x 128, 240 x 160, 320 x 160, 320 x 240
- LCD Mode: STN-Blue, Grey, YG, FSTN-Pos. Neg. as option.
- LED Backlight: White, YG, Green, as option.
- LCD Controller: T6963, S1D13700 etc. as option.
- We have full product line with different module size, display model, 3v/5v power supply as option. |
|
DF30 Display Facia is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
LDSS - LARGE DIGITAL DISPLAY FOR SERIAL INPUTS
Ideal for Production line Monitoring, Temperature Zones Monitoring on the Plant Floor, Tank level Monitoring, Operation Timing, Storage/Process Temperature Monitoring...etc...,
The LDSS is the perfect solution to display a value that is currently stored in a register and displaying it on the plant floor.It is capable of accepting RS232 or RS485 as the input and displaying it as a remote or slave display.
- Exist in 2 versions, with display heights of 2.25" readable to 130' or the 4" readable to 180'.
- Input: accepts serial ASCII data from an host device
- Selectable for RS485 or RS232 serial interface
- Display capability: full numeric, limited alphabetical (missing M,W & X)
- Decimal point transmetted with the value
- Display selections: secondary display capability, Display scroll option
Supply a complete monitoring solution in combination with the Data Station Plus, the Modular Controller or one model of the G3 series |
|
- All product designed and produced by Topway ourselves.
- Graphic (full dots) LCD display, we can offer the module with Chinese Fonts Library Embedded.
- All kinds of resolution:
144 x 32, 160 x 32, 320x32, 128 x 64, 160 x 80,
192 x 128, 240 x 64, 240 x 128, 320 x 240
- LCD Mode: STN-Blue, Grey, YG, FSTN-Pos. Neg. as option.
- LED Backlight: White, YG, Green, as option.
- LCD Controller: ST7920, RA8803,etc.
- Do you want to open China market? Chinese Fonts embedded products can help you to speed up your design process and improve display speed. |
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A +Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
Seneca Code: S401
- ModBUS OLED Display
- Display: up to 20 measures
(max 3 per pages) freely configurable
- Display OLED 2,7”, 128x64 pixel
- Tiny dimension 96x48x25 mm
- Power 80-265 Vac; 10-40 Vdc / 19-28 Vac
- Interface:
RS485 ModBus RTU Master
RS485 ModBus RTU Slave
- Analogic and Digital Values acquisition by master or slave devices
(ModBUS RS485)
- Setting: language, brightness, contrast, communication parameters, scale, offset, unit of measurement. |
|
| Configurable indicators for temperature, pressure, force, current and AC voltage, position, normalized inputs |
|
- Handheld Readouts.
- Made from a Lightweight Aerospace Alloy.
- Available Hermetically sealed for use in wet conditions.
- Tare, Peak and Reset facility.
- Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
- All units are calibrated to comply with ISO 7500-1: 2004.
- The accuracy of the cells are better than 1% of applied load.
- The power source is a 9V PP3 battery, can be supplied for
mains power if required (240v).
- 12 Month Guarantee, subject to conditions.
- Complete with carry case. |
|
The EL display is ideal for medical, transportation, military, and industrial applications that need to highlight important information under extreme conditions. Planar's EL displays endure extreme temperatures (-50-+85 celsius) and high vibration environments.
EL320.240-FA3 is 320 column by 240 row flat-screen, multi-colour display based upon thin film electroluminescent (TFEL) technology. Ted and green sub-pixel elements are formed on an amber, ALD-based substrate by applying an organic filter to a glass cover panel. Offering the same high performance, visual characteristics, and “at-a-glance” viewability of Planaräs monochrome EL-product line, the EL320.240-FA3 will add critical colour capabilities to the inherent ruggedness of this proven display technology.
Model: EL320.240 FA3
Technology: Thin Film Electroluminescent (TFEL)
Diagonal: 4.9” (12,3cm)
Pitch: 0,31 mm
Brightness (typical): 85 cd/sq.m
Viewing angle: > 160
Response time: < 1 ms
Operating temperature: - 50 - +85 celsius degrees
Video interface: 4 bit AMLCD
Other features: Red/Green/Yellow, multi-colour, 16 colours
Dimming
RoHS compliant
www.planar.com
www.planarembedded.com |
|
Planar's innovative see-through display technology is ideal for applications that require fresh new look with wide angle and crisp viewing characteristics.
- Perfect for transportation, premier consumer electronics and architectural applications.
- Easy to customize into curved shapes to help bring innovative product designs to life.
With the ALD technology - used in creating Planar's electroluminescent displays - where the layers used to coat the display are extremely thin, it is possible to create transparent layers on the display surface. As there are no liquids involved, the displays can be bent or curved to any imaginable shapes. Demos have been developed on a mirror-surface and other even or uneven surfaces can be made into a display with Planar¡'s unique technology.
Planar's EL display range combines long life time with endurance and great visual performance. Traditionally electroluminescent displays use a non-reflective back electrode, which enables high contrast and over 160-degree viewing angle even in high ambient light. The displays have been designed for the most demanding conditions: extreme temperatures and high vibration environments. The operating temperature range of EL displays is -50 degrees Celsius up to +85 degrees Celsius. Properly mounted they can withstand high shock loads as well as severe vibration found in demanding applications. |
|
|
