|
|
|
The EKOHEAT Compact model is versatile, rugged & easily integrated into existing manufacturing cells. The power control system delivers output power from 100 W to 15 kW with 100% duty cycle at output frequencies from 50 to 150 kHz, CE marked with a wide range of standard features & functions. Ambrell’s new AutoTap technology is used for challenging applications where steel is heated through Curie temperature, automatically adjusting for the varying electrical load during this transition.
|
|
|
Models with max output power from 35 kW to 500 kW. EKOHEAT induction heating systems for 5-15 kHz range provide reliable and repeatable solutions for heating with large coils or for heating larger parts. Among the many typical applications are heating of hard-to-couple parts, deeper heat penetration, crystal growing, heat treating steel, preheating for forging of steel, aluminum, copper or brass, and melting in crucibles.
|
|
Performance:
The CXH series of hybrid, high frequency power supplies is designed to operate at a fixed frequency over the range of 2 to 40 MHz. The rugged amplifier design is well suited to demanding industrial applications where stability and reliability in the presence of erratic loads is required. The solid-state driver section features microprocessor control for precise power control and diagnostic monitoring.
Applications:
The CXH series of high power supplies provides stable, reliable RF power for industrial heating applications including drying, plastic welding, silicon crystal growing and flat panel.
Features:
Standard power ranges: 15kW, 25kW and 50kW
Rugged, reliable design for years of trouble-free operation
Simplified operation through microprocessor- controlled user interface
CX series solid-state driver requires no tuning or adjustments
Water cooling increases tube life by reducing thermal stress in high VSWR mismatched loads
RS-232 package standard
ETL Mark on CXH 25kW
|
|
|
|
|
|
STATIPOWER SP11 Induction Power Supply
Features/Benefits
* 50-200 kHz with a wide range of power outputs for application flexibility
* Continuous or intermittent duty
* 100% solid state design. Ideal replacement for less efficient oscillator tube power supplies
* High, 0.95 input power factor under all operating conditions
* ±1% output regulation accuracy with ±10% line variance under all operating conditions
* Single control board for reliable operation and simplified maintenance
* Analog display of voltage, frequency, current and output power. Built-in digital heat timer
* Optional RS-232/485 interface for automatic operation under computer control
* Built-in load matching capacitors and variable ratio isolation transformer
* Built by the world's largest designer and manufacturer of induction heating equipment
The STATIPOWER® SP11 is a self-contained, stand-alone solid state transistorized power supply for heating a wide variety of parts. Application capabilities include hardening, tempering, brazing, soldering, melting, bonding and shrink fitting. A broad range of single-turn and other low impedance heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer.
|
|
|
|
|
|
STATIPOWER SP5 & 7 Induction Power Supply
Features/Benefits
* Multiple power/frequency combinations for application matched performance
* "Bullet-Proof" circuitry eliminates nuisance shutdowns and restarts
* Voltage fed for 0.95 input power factor over full operating range
* Output regulation by voltage, power or current. Jumper selected
* Single control board. Field replaceable for easy maintenance and trouble shooting
* Interchangeable control board. Factory calibrated to eliminate field adjustment and calibration
* Modular, single-layer design for easy access and maintenance
* Pressure switches on all capacitors to shut down system before complete capacitor failure
* Built-in annunciator panel for simplified status/fault diagnostics
* < 85 dB operating sound level for quiet operation
Job-Matched Induction Heating Power Supplies:
STATIPOWER® SP5 & 7 water-cooled, solid state power supplies are designed for case hardening, through hardening, annealing, mass heating and many other applications. Power and frequency combinations from 10 to 1,300 kW/1 to 25 kHz are available in single and dual frequency models.
|
|
MF and RF generators for inductive heating processes
Induction Heating - briefly illustrated
Induction heating is based on the physical effect that most electrically conductive materials heat very quickly and efficiently when exposed to a high frequency magnetic field. By induction, energy can be rapidly and precisely transferred into the work piece without physical contact with the heat source. HÜTTINGER’s induction generators provide robust, reliable and stable performance even in the harshest of production environments. Our animation shows the principle of induction heating process.
|
|
| ... products without technical information |
| |
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
Panasonic KF-350 and KF-500
Cost-efficient. Clean. Consistent.
The Panasonic KF series power supplies provide simple, efficient and dependable operation. They are designed to maximize welding performance while minimizing spatter. A special idle power saving circuit also reduces power consumption, which ensures lower operating costs.
For most conventional applications the KF-350/500 has an exceptionally low total cycle cost compared to other welding packages.
Each package incorporates a power supply, wire feeder and remote control pendant.
Features & Benefits
- Includes idle "power saving circuit" - reducing power consumption as well as operating costs
- Runs in low noise level
- Trigger latching capability on long welds to reduce operator fatigue
- Excellent welding performance for Argon mixed gases and 100% CO2
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
| ... products without technical information |
| |
|
|
|
|
Powerbox Greenhub 2000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 2000W of peaking power
- the maximum power in continuous use: 1800W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 28 l/min.
Included in the system Powerbox GreenHub 2000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powercell Greenhub 5000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 5000W of peaking power
- the maximum power in continuous use: 2700W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 70 l/min.
Included in the system Powerbox GreenHub 5000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powercell Greenhub 3000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 3000W of peaking power
- the maximum power in continuous use: 2700W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 42 l/min.
Included in the system Powercell GreenHub 3000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powerbox Greenhub 1000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 1000W of peaking power
- the maximum power in continuous use: 800W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 14 l/min.
Included in the system Powerbox GreenHub 1000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powercell Greenhub 4000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 4000W of peaking power
- the maximum power in continuous use: 3800W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 56 l/min.
Included in the system Powerbox GreenHub 4000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
Powerbox 500 is a fuel-cell system for electric current production at zero emissions. A super-compact500W system (550W peak), ideal for fuel-cell small applications: modeling, robotics, automation, small electric vehicles or any other portable application.
|
|
|
Rugged. Reliable. GenCore® fuel cell systems. With unmatched availability and scalable DC power, GenCore fuel cells outperform batteries and generators without any of the associated drawbacks. It’s the best solution for your back-up power requirements. Because you don’t want to know when the power comes back on, you only want to know that it never went out.
|
|
... see all the products in the category
Fuel cells
|
|
|
see the results for the following category : 
