|
|
EKOHEAT induction heating systems provide a reliable, compact solution for heating your parts with a quick, clean source of heat. Available in these models, all are ideal for repeatable, non-contact heating of your parts. The remote heat station is typically located up to 100 feet from the power supply
Equipped to operate over a broad frequency range, EKOHEAT is ideal for heating parts of many geometries and compositions with excellent power control to better than 50 W resolution.
Model Power (kW)1 Frequency (kHz) Vac Line kVA Input
EKOHEAT 15/100 15 50-150 360 - 520, 3 ph 17
EKOHEAT 30/100 30 50-150 360 - 520, 3 ph 35
EKOHEAT 45/100 45 50-150 360 - 520, 3 ph 52
|
|
High-frequency generators manufactured by ZEMAT are a source of high-frequency energy indispensable in industrial processes of dielectric and induction heating.
HF generators are used for supplying pneumatic and hydraulic presses, drying chambers and tunnel driers, vacuum chambers for plasma processing, production lines for pipe manufacturing.
HF generators allow for alternate work with more than one output unit, e.g. with two hydraulic presses. The construction of ZEMAT HF generators is based on widely available power triodes produced by leading European manufacturers. ZEMAT makes generators GX series, with power and frequency adjusted to technological needs, used in dielectric heating and generators GI series used in induction heating.
HF generators manufactured by ZEMAT are widely used in:
+ processing of thermoplastics,
+ heat treatment of textile raw materials such as, for example, yarn drying,
+ purification of woven fabrics- processing in low temperature plasma,
+ heat treatment in wood and furniture industry- heating bent and glued components, drying of a wooden veneer,
+ heat treatment of electro-insulating materials in power industry such as drying insulating elements made of pressboard,
+ metal treatment and processing such as welding pipes with a seam.
|
|
STATIPOWER® SP11
Radio Frequency Induction Heating Power Supplies
Features / Benefits
50-200 kHz with a wide range of power outputs for application flexibility.
Continuous or intermittent duty.
100% solid state design. Ideal replacement for less efficient oscillator tube power supplies.
High, 0.95 input power factor under all operating conditions.
±1% output regulation accuracy with ±10% line variance under all operating conditions.
Single control board for reliable operation and simplified maintenance.
Analog display of voltage, frequency, current and output power. Built-in digital heat timer.
Optional RS-232/485 interface for automatic operation under computer control.
Built-in load matching capacitors and variable ratio isolation transformer.
Built by the world%u2019s largest designer and manufacturer of induction heating equipment.
RF Power Supply For General Purpose Induction Heating
STATIPOWER® SP11 is a self-contained, stand-alone solid state transistorized power supply for heating a wide variety of parts. Application capabilities include hardening, tempering, brazing, soldering, melting, bonding and shrink fitting. A broad range of single-turn and other low impedance heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer.
|
|
MF and RF generators for inductive heating processes
Induction Heating - briefly illustrated
Induction heating is based on the physical effect that most electrically conductive materials heat very quickly and efficiently when exposed to a high frequency magnetic field. By induction, energy can be rapidly and precisely transferred into the work piece without physical contact with the heat source. HÜTTINGER’s induction generators provide robust, reliable and stable performance even in the harshest of production environments. Our animation shows the principle of induction heating process.
|
|
STATIPOWER® SP5 & 7
Solid State Induction Heating Power Supplies
Features / Benefits
Multiple power/frequency combinations for application matched performance.
"Bullet-Proof" circuitry eliminates nuisance shutdowns and restarts.
Voltage fed for 0.95 input power factor over full operating range.
Output regulation by voltage, power or current. Jumper selected.
Single board control. Field replaceable for easy maintenance.
Interchangeable control board. Factory calibrated to eliminate field adjustment and calibration.
Modular, single-layer design for easy access and maintenance.
Pressure switches on all capacitors to shut down system before complete capacitor failure.
Built-in annunciator panel for simplified status/fault diagnostics.
< 85 dB operating sound level for quiet operation.
Job-Matched Induction Heating Power Supplies
STATIPOWER® water-cooled, solid state power supplies are designed for case hardening, through hardening, annealing, mass heating and many other applications. Power and frequency combinations from 10 to 1,300 kW/1 to 25 kHz are available in single and dual frequency models.
|
|
# Single control board with advanced digital technology provides the highest level of system reliability and offers a direct link to computers and other melt shop systems. With the VIP® Melt-Manager® option, the VIP® unit includes a built-in computer with advanced diagnostics and key melt control functions.
# Door within a door protects control circuitry from higher voltage areas while circulating air keeps compartment clean and cool, dramatically increasing circuit board life.
# Rugged solid-state semiconductor components supply alternative current to the furnace coil at the proper design frequency.
# Primary or secondary furnace-isolation systems provide double protection: isolation transformer and ground leak detector, resulting in optimum safety and increased melt rates.
# A full-access water pumping module is available on units from 750kW to 1750kW. This modular pumping system offers easy access to all major water systems components, simplifying and speeding routine maintenance.
# Full system diagnostics: circuit monitor provides fast, accurate system information for troubleshooting and easier maintenance.
# Backup safety systems: An ultra-fast-acting AC Interrupter and an Over-Voltage Protection Circuit provide the ultimate system protection. Smaller units are protected by a current limiting reactor and high-speed circuit breaker.
# Husky copper bus bars, in comparison to water-cooled copper tubing, put power into the melt, not the water system.
# Automatic full power response - from cold charge to pour - melts more pounds per kWh and kVA for lower melting costs and greater productivity.
|
|
| ... products without technical information |
| |
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program DC/DC converters for automotive applications. The series WRC is available with 30, 60, 100 and 150 W. The converters are designed for mobile use acc. to EN 50 155, LES-DB-BN 411 002 and IEC 571-1 (railway, automotive). The battery voltages 24, 36, 72, 90 and 110 V +40/-45 % are covered with three input voltage ranges. All four power ranges have a high efficiency and are available with single or dual output voltages. The converters have an extreme high reliability (MTBF >1.000.000 h, TA = +40 °C) and an isolation of at least 2,1 kVDC (prim.-sec.). The temperature range is -40...+85 °C acc. to EN 50 155. Other important features are resistance against vibrations and reverse polarity protection at the input. The power supplies can be used in 19" racks or for wall mounting with H15 connector. The series WRC needs no ground load, is short circuit protected and has extensive monitoring and protection systems.
|
|
|
The DC/DC power supply systems of the series MPG from MTM Power, the specialist for high-quality unparallely power supplies, are designed among others for different applications in transportation, telecommunications and the charging of lead batteries during stand-by parallel operation. The universally useable, modular and easy-to-scale system is based on the DC/DC converters of the series PCMD200W and PCMD400W which are proved in transportation applications. The series MPG2 is available with 2 plug-in positions and a total output power of 500-800 W and the series MPG3 with 3 plug-in positions and a total output power of 750-1.200 W. With different wide input voltage ranges between 14,4 VDC and 154 VDC, the devices supply an output voltage of 12, 24, 48, 72 and 110 VDC. The output voltage operates with UI characteristic curve. The system can be switched into an energy-saving stand-by operation via a remote control input. Further features are signalling of input and output voltage by an LED as well as a potential-free power good signal. The whole system is passively cooled by convection and is designed for an ambient temperature range of -40...+70 °C.
|
|
FlatPAC-EN - AC-DC Power Supply
Small, versatile and flexible, the FlatPAC-EN can be configured with all standard VI-200 / VI-J00 and Maxi, Mini and Micro DC-DC converters %u2013 full, half and quarter-brick sizes. These modules cover the entire range of outputs from 1 to 100 Vdc and 25 to 500 watts, as well as an array of non-standard voltages.
LoPAC Family - AC-DC Switcher Power Supplies
The LoPAC family consists of three ultra low profile, fan cooled, switching power supplies that combine the advantages of power factor correction (PFC) with high power density. They consist of the PFC Mini, PFC Micro and PFC MicroS.
Javelin MIL-COTS PFC Power Supply
The Javelin is designed to withstand the extreme environments and stresses that are often inherent in military applications and industrial uses. Operating from single or 3%u2013phase AC lines, it provides a single output from 2 to 54 Vdc at up to 5,400 watts.
|
|
This range of compact, modular, dc to dc power supplies is recommended where cost and space restrictions are important. The range has been designed with the needs of instrument manufacturers in mind.
Provision is made in the PS2001 and the PS3000 for continuous monitoring of output voltage and current.
A coaxial high voltage power lead, type RG174, is used in the PS2001 and PS3000. The lead can be fitted with a connector to your required specifications.
features :
- output voltage range up to 3000 V
- positive and negative versions available
- choice of 5, 12 or 24V input, depending on product
- internally or externally programmable
- excellent line load regulation
- input and output protection
- output voltage and current monitoring
- customised lead/connector option
- low ripple and fully screened
|
|
MTM Power GmbH, the specialist for high quality power supplies, has designed the DC/DC converter series SMM50 for the use in vehicles, particularly for railway applications. These converters have an output power of 50 watts and are suitable for the stationary use as well as for the mobile use acc. to EN 50 155. The nominal input voltages are 24 VDC ((14,4…50,4 VDC), 48 VDC (28,8…100,8 VDC) and 110 VDC (43,2…154 VDC) and 230 VAC (85…264 VAC). Due to these input voltage ranges, the converters can be used in all on-board power systems. The output voltages are galvanically separated and are available as single, dual and triple versions. Further features are vibration and shock resistance acc. to IEC 68 T.2-27, high efficiency of 79...89 % and reverse polarity protection at the input. The devices are prepared for the use in 19" racks and have a H11 connector acc. to DIN 41 612. The dimensions are 173,0 x 38,7 x 111,2 mm or 177,0 x 40,2 x 128,4 mm (length x width x height). The series SMM50 needs no ground load, is short circuit protected and has various monitoring and protection systems.
|
|
- Robust low-power chromated aluminium enclosure
- Wide range PSU for 24, 36, 48, 72 and 110 V
- Processor unit based on PowerPC® MPC5200
- Large selection of I/O modules
- Configuration as control system or distributed I/O
- Simple snap-in to individual I/O function blocks
- Hotplug of the I/O modules
- Own self-diagnosis for each module
- CANopen system bus under VxWorks®
- Full EN 50155 compliance
- Safety requirements according to SIL3
|
|
Javelin MIL-COTS PFC Power Supply
The Javelin is designed to withstand the extreme environments and stresses that are often inherent in military applications and industrial uses. Operating from single or 3-phase AC lines, it provides a single output from 2 to 54 Vdc at up to 5,400 watts.
|
|
Model ORION-D3002DDP
300W -48V & 24V DC input DC/DC PS/2 ATX power supply
Mini-redundant DC to DC power supply suitable for 2U and larger chassis
Active PFC, full-range input
-38 V DC to 72V DC output for telecommunication applications
Test equipment for telecommunication applications
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power connector for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-3002
300W PS/2 hot-swap redundant power supply
Mini-redundant power supply suitable for 2U and up chassis
Max. +5V standby output is 2A
|
|
| ... products without technical information |
| |
Feeding Technology Components
Afag is your worldwide presented partner for high quality feeding technology with innovative products, customized solutions and excellent service.
Linear conveyors
* innovative KLF
* conventional LF
* conveyor belt FB
Feeder bowl drives
* innovative feeder drives
* conventional feeder drives
Feeder bowls
* plastic
* aluminium
* stainless steel
Refilling units
* Conveyor belt hopper
* Vibratory hopper
Control devices
* Type SE
* Type IRG
Standard feeding station
|
|
|
Eriez offers a complete line of vibratory equipment to convey, screen and feed materials in quantities ranging from a few spoonfuls to tons per hour. If the many standard systems available are not quite right for your operation, Eriez' Technical Center can develop custom-designed vibratory and screening equipment to precisely meet your needs.
|
|
Ranging from the extra heavy-duty stationary models to the most flexible feeders for mobile applications, Metso Minerals feeders offer minimum downtime and maximum tonnage for thousands of installations around the world. Our feeders feature a rugged yet flexible design, extra heavy-duty construction, exclusive vibrator technology and ease-of field-changes in grizzly opening and deck-slope.
Metso Minerals feeder series is designed particularly for continuous use with any hard and abrasive materials. They combine a robust frame design with
high feeding capacity and a limited overall height. These features make it ideal for operation in restricted space, and in both stationary and mobile plants.
|
|
Eriez offers a complete line of vibratory feeders for materials in quantities ranging from a few spoonfuls to tons per hour. If the many standard systems available are not quite right for your operation, Eriez' Technical Center can develop custom-designed vibratory and screening equipment to precisely meet your needs.
Small
Light and medium-duty feeders accurately feed and control material flows at rates ranging from pounds to many tons per hour. Totally enclosed magnetic drives. Low power consumption. AC operation.
High Speed
Exceptionally high-speed feeding of light, bulky materials.
High Deflection
handle powders and leafy products that normally could not be fed successfully in an electromagnetic feeder.
Heavy-duty
large capacity and difficult material handling operations up to 850tph (765mtph)
Mechanical Feeders and Conveyors
Low-horsepower, high-capacity mechanical feeders handle bulk materials in volumes up to 2250tph (2040mtph).
Conveyors - Single Mass and Mechanical Tuned Two-Mass
Volumatic Feeder Machines
Made up of a hopper, vibrator, feeder and controls. Assures accurate flow of dry bulk materials for weigh scales, packaging and bagging equipment, small batch operations and additive feedings.
|
|
|
Adjustable flows from 0 to 10 tonnes/hour according to the choice of the electromagnetic feeder.
|
|
NETX Vibratory Feeder
Series 661
The Series 661 Netx air operated Vibratory Feeder by Dynamic Air Inc. has an infinitely variable speed natural frequency drive system, which utilizes compressed air as the power source. A powerful oscillating piston coupled with special leaf springs, feeds dry granular materials at almost any rate desired. The Netx Vibratory Feeder is especially ideal for feeding weigh scales and other process equipment, where a constant and/or reliable feed rate is required. A standard PLC programmable controller can be used to electronically control the feed rate, at up to a 100 to 1, turn down ratio. It is available in a wide variety of sizes and materials of construction.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
