|
|
The professional clean room appliance
By its compact and self-contained seamless construction in stainless steel (V2A) the EFA-SRT-CR (Clean Room)is best positioned for the use in clean room areas and air locks. This door has been designed to meet the high standards for clean rooms and is the ideal solution for separating rooms with a pressure gradient. In contrast to conventional doors this appliance has an extreme narrow and dense side guidance of the curtain which results in very low air leakage of less than 100 m3/h at 150 Pa delta air pressure.
|
|
|
Albany Door Systems' self-repairing UltraCleanT door is designed for high traffic sanitary applications where environmental control and hygiene are critical. Its fast opening and closing speeds control air infiltration and the spread of contaminants. Two piece side column design and stainless steel components allow for easy cleaning.
|
|
|
Doors from Albany Door Systems are ideal for hygienic and clean-room applications, greatly reducing airflow and minimizing contaminates in specific areas. Moreover, certain specified components can be thoroughly and safely cleaned with industrial-strength cleaning agents.
|
|
|
|
|
|
Interlock control system
A plug-in modular system for linking up to 10 doors, or up to 10 groups of doors to create an interlock system.
No complicated control system required as dependencies are set on site with DIP-switches at each control module. The system allows for easy expansion.
Quite often one of the requirements of clean-room technology or laboratories is, that certain doors may only be opened ifothers are closed. The DICTATOR interlock control system is the idealsolution to link units of up to 10 doors.
The dependencies between different doors are programmed directly in the
respective control modules on each door using a very easy adjustable matrix control system. This is done with DIP-switches representing the different doors. The dependences / linksnbetween the doors can also be changed on site at a later stage, not requiring any special programming
know-how. The interlock control terminal is provided with a potentialfree make-break contact. This permits e.g. to pass on the information on each door to a central control system.
The DICTATOR interlock control system is a modular system and therefore
extremely flexible and easy to adapt to different sizes of door units and
requirements.
|
|
|
Air purification in clean rooms can result in pressure differences of up to 50 pascal. The fully transparent curtain in this clean room door is tightly integrated in the special guide rails, minimising air losses (leakages). This enables an optimum design for ventilation systems. Stainless steel cladding on the shaft and operator, as well as a welded-on spring steel stabilisation, are further characteristics of this door.
|
|
CLEAN ROOMS
Forum Labo
Flexible motorised interior roll-up door with self-supporting frame and opening speed of 1.2 meters per second. Clean Room curtains resist between 4 and 10dN/m2, depending on design. Wholly enclosed rods are sealed to resist bacterial deposits. Impact resistant curtain, with the option of the self-relocating system. Standard size up to 4.5 x 4.5m.
|
|
EFA-SRT-EC High-Speed Roll-up Door for wet and hygienic environment
The EFAFLEX “Easy Clean” (EC) series is well suited for all kind of internal transits in foodsupplying enterprises. The elastic curtain fully complies with the HACCP and FDA requirements. Of course, the whole door construction is built of stainless steel.
All critical door sections are well accessible for cleaning purposes. Because of its space-saving construction the EFA-SRT-EC High-Speed Roll-up Door can be mounted even under cramped construction conditions.
|
|
Sliding Door with Controlled Leakage Flow
DIVA LC Clean range
The DIVA LC Clean sliding door is designed to respond to the requirements of the most advanced technological sectors for which a controlled atmospheric environment is
necessary. This door range is dedicated to sites where air permeability must be controlled: hospitals, clean rooms, laboratories, etc.
DIVA LC Clean offers specific technical solutions, while
providing an enormous usage comfort:
• People transporting sensitive materials or pushing a
carriage appreciate a wide automatic opening.
• Doors opening without contact or handle manipulations
allow respecting stringent hygienic rules.
• Adjusting leaves opening and closing speeds limits
contamination exchanges between two areas.
- Leakage flow controlled with air pressure
- Ergonomy linked to cleaning and decontamination requirements.
- Sound attenuation and isolation down to 30 dB*
|
|
|
|
|
|
Technical specifications:
Maximum static pressure: 8,5 kPa
Maximum airflow: 3,2 m3/min
Sound level: 54-59 dB
Control panel: filter saturation, overheating and overloading indicators, 7 speed levels of suction.
Synchronization plug for connection with other applications.
Dimensions (mm): 404 (L) x 360 (W) x 491 (H)
The CBA-1000AT-HC-DSA-V1 is a particularly innovating solution proposing a suction power of 8.5 kPa, an airflow of 3.2 m3/min and a very compact size compared to those performances.
Ideal for all types of laser marking and micro-cutting applications, the CBA-1000AT-HC-DSA perfectly deals with the problem of clogging fumes thanks to a unique and patented filtering process with zeolite. It neutralizes fumes and avoids an early saturation of the main filter. The action of an automatic lever allows a reinitialization of the filter state and thus lengthens the system time of use. An activated carbon filter manages odors and fumes.
An electronic panel board allows to master 7 levels of suction speed, indicates the filter saturation and possible problems. Likewise, a synchronization plug connects the model to different types of productive systems (machine-tools, production line, etc) for a simultaneous running.
The machine offers a very good sound comfort (54-59 dB).
Possibility to exhaust air outside.
Non-applicable for toxic gas, liquid, explosive, corrosive and abrasive substances.
|
|
Mobile cartridge filter with fully-automatic, dust-related deduster via the POWER SPRAY SYSTEM. Comes equipped with a separator and two durable large-surface filter cartridges.
The controls include a post-cleaning function during idle ventilation time. The unit comes supplied with a filter monitor, sealing face lifter, hour-meter, direction display, cable reel and castors with brakes.
Includes cable bearer, 5 m cable and plug.
|
|
|
|
|
|
Optimum protection thanks to a smart design
Well thought-out and safe
Welding, grinding, polishing: Euromate presents the breakthrough for downdraft tables. And not without reason, as the Euromate downdraft table combines innovation and safety in a smart design with an extremely low noise level. In addition to this, the well thought-out design makes maintenance and service from the front of the workbench very easy.
Innovative workbench
The downdraft table is a workbench and an extraction/filtration system in one. The table removes dust and fumes from the breathing zone of the welder by drawing these through the work surface and/or the back panel. Filtering them from the air inside the workbench. With the Euromate downdraft table your workplace will always have a powerful extraction and filtration system. The downdraft table can be placed anywhere, even inside a welding booth.
Optimal safety
The Euromate downdraft table meets the strict international guidelines for welding fumes. The downdraft table has an advanced, three-way spark arrester that guarantees optimum safety.
ADVANTAGES: high filter capacity, long filter life, high safety level thanks to three-way spark arrester, low noise level, a solution for every situation and maintenance can be performed easily.
|
|
Downdraft table - DraftMax
- Powerful extraction of welding smoke and grinding dust
- Three-way spark arrester enabling optimal safety
- Filter area of 52 m2
- All maintenance performed from the front
- Efficient automatic self-cleaning
- Available in four different models, geared to your specific situation.
The DraftMax tables are setting new standards for downdraft tables by offering a three-stage pre-filtration for optimal spark arrest, a maximal filter surface of 52 m2 within the available space and an extreme service-friendliness. All service and maintenance can be done from the front side. DraftMax has a very powerful extraction and the noise produced by the unit is extremely low. All features make the new PlymoVent downdraft table, DraftMax, a reliable and safe solution with a low cost of ownership.
|
|
|
|
|
|
Modular extraction hood: banish welding fumes to the past
Euromate, a specialist in innovative solutions for the extraction of welding fumes, has developed a modular extraction hood. This modular concept provides the best answer to all your welding fumes, cutting and gouging issues, where source extraction is impossible.
Often the extraction of welding fumes in hoods takes place in the middle, not always being very efficient. Some of the fumes will flow out at the sides of the hood – not being extracted at all. Therefore Euromate developed a side extraction framework, optimising the airflow considerably and thus improving the extraction’s efficiency.
As extraction takes place from the sides instead of the middle, more fumes are being extracted from the working area – creating a healthier working environment. Thanks to the well thought-out deflector plate, the airflow is controllable and minimizes sparks to reach the air-treatment system, decreasing the risk of fire substantially.
As the extraction hood of Euromate comes in modular parts, the extraction hood can easily be put together on the spot. It’s not a do-it-yourself kit, but it is not far of! The extraction hood can be suspended from the ceiling or used as a freestanding unit on aluminium legs – according to the environment you are working in. The legs are optional, available in 2, 2.5 and 3 meters and can be cut to requested lengths. The modular design comes as standard with eye bolts. Euromate offers a modular design from 1.5 m² up to 8 m². Expandable with various accessories, such as a lighting fixture incl. fluorescent light, aluminium legs and welding strips.
|
|
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Cartridge units utilize self-cleaning, high efficiency cartridge filters, that reduce filter replacement costs, as the filter elements are continually cleaned by compressed air. All Micro Air cartridge collectors utilize Micro Air's exclusive Roto-Pulse cleaning system. Because this cleaning system cleans the entire surface of the cartridge, it has proven to be far more effective, than the traditional reverse-jet system, thus extending filter life. Cartridge collectors can also be equipped with HEPA filters or Charcoal Modules.
|
|
|
|
|
|
The smart solution without ductwork
Diluter systems are the solution, when source extraction and hoods are not an option when large pieces of metal are fabricated, various welding processes take place at continuously changing locations and ductwork is difficult to install. The Diluter system has been designed especially for light to medium welding processes.
Flexible solution
Installing the Diluter system is easy as you do not need any ductwork. It does not only save ductwork (thus labour) costs, it is also a very flexible solution for facilities with many welding processes, changing locations constantly. The Diluter system suits almost any workshop.
Minor investment maximum result
The Diluter system consists of three main components: the filter unit, a fan and the Diluter itself. The Diluter is an air circulation unit with six multidirectional outlet nozzles. The unit re-circulates the cleaned air into the workshop by means of the outlet nozzles. The nozzles can be rotated to optimise extraction.
The airflows from the nozzles can be controlled individually making the system unique. Positioning the nozzles inside the welding fume layer gives the best result (usually between four and six metres). The main benefit is the relatively small investment for controlling welding fumes in your plant.
|
|
|
|
|
|
High-level control of welding fumes
Push-pull systems are the solution when source extraction and hoods are not an option, such as working areas with crane transportation, plants where large pieces of metal are fabricated (and arms are impractical) or workshops where various welding processes take place at continuously changing locations. The push-pull system has been designed especially for heavy industry.
Control your background concentration
Welding fumes rise due to heat. At a certain level – due to the cooling process - the same temperature level will be reached and a fume layer arises. The push-pull system moves this layer in a controlled way at a particular height (usually between four and six metres) where the air is being filtered and re-circulated. This way the smaller particles cannot cool down and return to working level. Which means: less fine dust on your work floor.
Ductwork, the main aspect
The main aspect of the push-pull system is the ductwork. Ductwork can be installed in all kinds of settings, U-shaped or paralleled. To determine the most effective system for your surroundings, you need to consider all aspects; the welding process, the height at which the welding fume layer develops, overall volume and the general construction of your workshop.
BENEFITS: optimum control, prevents accumulation of welding fumes, less fine dust at your work floor, heated air stays within the workshop, thus energy saving, suits almost every heavy industrial working environment.
|
|
|
|
|
|
Downdraft Table / Workstation
The Filter 1 Benchtron Downdraft/Backdraft Workstation removes dust, fumes, and smoke from sanding, grinding, buffing, or welding of metals, composites, fiberglass, plastics, or wood. The Benchtron meets OSHA requirements for respirable dust down to .05MG/M3, with adjustable suction velocities of 150 to 800 FPM in the "working zone." High efficiency filters remove 99.9% of all particles 1/2 micron and larger. The unit features automatic self-cleaning, flourescent lighting, and the Regain Air, "Push/Pull" technology pioneered by Filter 1 to provide a blanket of clean air in the "breathing zone."
The standard design includes a 3 phase TEFC motor with starter and rubber vibration mount, a magnahelic guage, and sound insulation to less than 78 db. The Benchtron is available in configurations of one work surface or two, for sitting or standing.
Options
- Custom Sizes to Fit Your Application
- Carbon After Filters
- Odor Absorption Modules
- Sound Attenuators
- Work Surface Grating: Wood, Metal, Galvanized, Stainless Steel, Non-scratch Fiberglass, or Rubber
- Various Hole Size Grate
- ASHRAE or HEPA Safety Filters
- Safety Monitor Gauge and Alarm
- Spark Trap for Welding or Heavy Grinding
- Various Filter Media for Special Applications
|
|
|
Micro Air Downdraft Tables offer you the flexibility to configure a work table to exactly meet your needs, space and worker preference. Downdraft tables provide your clean air solution in a variety of applications including grinding, plasma/torch cutting, sanding, welding smoke, deburring, or fumes.
|
|
|
The SER is designed to retract the hose with the assistant of a spring operated retraction device. We recommend this reel for general service shop applications when you can easily reach the hose.
|
|
|
|
|
|
SCF-F plug & play filter units; optimise your extraction hood and multiple arm system.
Euromate offers a variety of filter units - mobile, stationary and central filter units - for any air volume you need to cover. All units are developed to filter welding fumes and dust very effectively. The latest filter units are the self-cleaning central filters with an integration extraction fan (SCF-F 2 with two filter cartridges and SCF-F 4 with four filter cartridges); developed in accordance with the latest international electrical standards.
The SCF-F series have been developed to meet the demand for plug & play filter units to support small and medium-sized extraction hoods and multiple arm systems with up to 7 extraction arms.
The main feature of the SCF-F is the outstanding cleaning technology of the filter cartridges. The self-cleaning mechanism ensures that the filter stays efficient and has a longer lifespan.
Besides that the SCF-F 4 features a programmable intelligent control with a frequency inverter as standard. The unit will adapt to specific needs and controls the air volume automatically; the result: a reliable and constant filter performance.
The frequency inverter has a very positive effect on the lifespan of the filter cartridges. In addition substantial energy savings up to 40% can be achieved; keeping the overall operating costs extremely low.
BENEFITS: plug & play, reliable and constant filter performance, low operating costs, efficient airflow control, energy savings up to 40% and solid construction.
|
|
Independent power
These stand-alone industrial air cleaners with cleanable electrostatic filters can extract welding fumes from the local atmosphere even when extraction close to the source is not possible. The HFE 25 has a capacity of 2,500 m³/h and the HFE 50 up to 5,000 m³/h. Naturally, the HFE 25 and HFE 50 also take out other pollutants such as fine dust.
Also suitable to extract oil mists after installing the appropriate pre and final filters and oil drainer.
|
|
Hydrotron DHYD Series: Wet Type Dust Collector / Downdraft Table
The Filter 1 Hydrotron Downdraft Table is a self-contained workstation with its own water dust collection system, excellent for "cell manufacturing." It features easy installation and comes ready to run. The workstation is available with a single work surface or with two work surfaces, one on each side.
The Hydrotron gets the dust immediately wetted, reducing the risk of fire in ductwork and meets OSHA and NFPA regulations for dust collectors located inside the building. The standard unit includes a fiberglass grated work surface, a Regain Air Curtain in front to prevent dust from escaping the work zone, and a clear inspection door.
Options
- Regain Air System
- Stainless Steel Construction
- Overflow/Low Water Cut-off Switches
- Explosion Proof Motors
- HEPA Safety Filters With Alarms
|
|
Ahead of its competitors
Euromate's MFD mobile welding fume extractor with its 50 m² DuraFilter® is ahead of its competitors on all fronts. The disposable cartridge filter has been especially developed to filter welding fumes and its special construction gives it some very exceptional characteristics. This gives the welder a strong and, most important, a constant extraction over a very long period of time. The DuraFilter® has a life that is many times longer than ordinary cartridge filters. This reduces operating costs drastically. Welding fume extraction from the work area with the MFD, with all its advantages, offers reliability and is cost effective.
|
|
|
PHV - PORTABLE welding smoke withdrawal system - clean air for a safe and healthy work surrounding field the PHV von PlymoVent is a user friendly, portable and mobile plant for efficient welding smoke exhaust at the source. Compactly and easily, simply in that. Above all suitably for light and normal weldings on the spot, in small areas or in difficult places. The PHV switches on by your mechanism automatically, as soon as one welds. It has 2 engines and two performance levels. The main filters has a surface of 12m ², which provides for long intervals without filter changes. The separated dust can be disposed together with the filter dust free. The welding smoke arrives to an aluminum prescreener in the main filters “Dura H®” over a metal before separator and. Subsequently, by means of a “EHEPA” filter a separator degree is reached of 99,9%. Between main and Nachfilter additionally an activated charcoal filter can be used.
|
|
The new PHV is a leap forward
Euromate has created yet another technological breakthrough by introducing the PHV. This portable unit is ahead of its time on performance, design and comfort of handling, fulfilling current and future requirements. One can simply always use the PHV everywhere, also in locations that are not or hardly accessible to stationary units or to the larger mobile welding fume extraction units.
The Portable High Vacuum (PHV) unit is one of the products in Euromate's new generation of the revolutionary innovative ProLine® welding fume extraction range. ProLine® means: innovative technology, efficiency and user-friendliness. Euromate offers a suitable system that has a unique price-quality ratio for every particular welding situation at any welding location.
|
|
|
|
|
|
Smoke 'n Go Smoke cabins
A quick smoke and back to work. That is the idea behind the Smoke 'n Go Smoke Cabins. Freestanding, easy to locate anywhere to facilitate a break for smoking near the place of work.
- Extremely efficient method of removing unwanted tobacco smoke.
- Splendid and elegant design.
- Cabin is available in various sizes.
- Open as well as closed models (with sliding doors) available.
- Odourless ashtray for several thousands of cigarette ends.
- No changes to the existing air treatment system are needed.
Specifications Smoke 'n Go Smoke cabins:
- Unique filter system, certified by TÜV and ECN, consisting of a prefilter, an ElectroMax filter, a HEPA filter and two activated carbon filters to adsorb both gasses and odours.
- The standard version of the cabin has transparent walls and is provided with lighting. Other colour schemes can be accommodated on request.
- Various sizes: for 2-3, 4-5, 6-7 and 12-14 persons.
- Options are a lit display and foot-and lean-to supports
- Automatic start/stop
- Push/pull system preventing any smoke to linger.
- Filtration: 99,99% of all harmful tobacco related gasses and particles (e.g. nicotine and formaldehyde).
|
|
|
|
see the results for the following category : 
