|
|
DICTATOR door dampers / door checks
Sie sind die Problemlösung in allen Fällen, wo das Zuknallen von Türen vermieden werden oder Türen auch bei Zugluft sicher zugehalten werden sollen. Krankenhaustüren, Tiefgaragen-, Keller- und Eingangstüren in Wohnanlagen, Bürogebäuden, die Liste läßt sich beliebig fortführen.
Wird ein Türdämpfer eingebaut, so kann die Tür problemlos von Hand bewegt werden, sie bleibt offen, bis sie von Hand geschlossen oder zugeworfen wird. DICTATOR Türdämpfer fangen sie leise und sanft ab, schließen sie sicher und zuverlässig. Es gibt keine Lärmbelästigung mehr durch zufallende Türen!
Die DICTATOR Türdämpfer können auch in Kombination mit einem Obentürschließer eingesetzt werden. Gerade bei Eingangstüren stellen sie sicher, daß die Tür im Sommer und Winter immer sicher schließt und das ohne Zuknallen.
Für die Montage an Brandschutztüren wurde der V1600 in einer speziellen Ausführung geprüft und zugelassen.
Die DICTATOR Türdämpfer gibt es in verschiedenen Ausführungen. Die gängigsten Modelle sind die Typen VS2000, V1600 und für die Montage auf der Türrückseite, der R1400.
Für sehr leichte, kleine Türen ist ein Sondermodell lieferbar, der DICTATOR JUNIOR, der durch seine sehr geringen Abmessungen besticht. |
|
DICTATOR provides three different types of radial-dampers for the control and damping of rotating movements andlinear movements over long distances :
- Radial dampers RD 240/241
- Radial dampers RD 80
- Radial dampers RD 50´
They are ideal for controlling and reducing speed and thus avoiding high
mass forces. The damping of all 3 types is fully variable. DICTATOR radial dampers usually come with a free wheel in one
direction.
The RD 240/241 radial dampers provide constant damping, even under strongly varying temperatures and therefore are the recommended especially for high or varying forces.They have been tested and are continuously monitored.
In addition to the standard types the radial dampers can be also produced according the individual requirements. |
|
They are used as safety- and function elements in order to damp speed and to slow down masses.
The damping speed of the adjustable dampers can be adjusted when the damper is already installed. |
|
| ... products without technical information |
| |
| Valve circular firebreak with blade swivelling for aeraulic conduits from 100 to 500 mms in diameter. Evolutionary case of order managing the equipment of release, indication and rearmament. Closing autocommandée by fuse or remote-controlled by suction cup with rupture or emission of current. Manual or motorized rearmament. Two models: pose sealed (Isone) or applies some (Isone/Ap). Two versions: with weak small overall dimensions or pressure losses (FdP version) (version EM). |
|
| ... products without technical information |
| |
Actuators for ball valves and butterfly valves, explosion proof
Electrical, explosion proof quarter turn actuators seriess ExMax and RedMax, for ball valves, butterfly valves and mixing valves, from 5 Nm to 100 Nm, in acc. with ATEX 94/9/EG for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with or without fail safe spring return function. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 0...10 VDC, 4...20 mA mode, 100 % overload protected, robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40°C to +40°C/+50°C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12x12 mm (size S) and 16x16 mm (size M). series ExMax-... for use in zone 1, 2, 21 and 22. series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal boxes and mounting brackets available. Adaptations for all typical quarter turn valves available. |
|
Actuators for air dampers and smoke extraction dampers, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for air dampers and smoke extraction dampers, from 5 Nm to 100 Nm, in acc. with ATEX 94/9/EG for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with or without fail safe spring return function. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 0...10 VDC, 4...20 mA mode, 100 % overload protected, robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40°C to +40°C/+50°C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12x12 mm (size S) and 16x16 mm (size M). series ExMax-... for use in zone 1, 2, 21 and 22. series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal boxes and mounting brackets available. |
|
| Explosion-proof eletrico servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco |
|
Actuators - HercuLine
HercuLine® actuators are engineered for exceptional reliability, accurate positioning and low maintenance. Designed for very precise positioning of dampers and quarter-turn valves, they perform especially well in demanding environments.
HercuLine 2000 Series
HercuLine 2000 series actuators incorporate the high quality and reliable features of the traditional HercuLine actuators with the added benefits of a microprocessor-based Enhanced Electronics Unit.
HercuLine 10260
The HercuLine 10260A medium-torque rotary actuator is engineered for exceptional reliability, accurate positioning and low maintenance.
HercuLink Software
HercuLink software enables access to programming and communication functions using RS485/Modbus communications that is standard with HercuLine actuators.
|
|
Actuators - HercuLine
HercuLine® actuators are engineered for exceptional reliability, accurate positioning and low maintenance. Designed for very precise positioning of dampers and quarter-turn valves, they perform especially well in demanding environments.
HercuLine 2000 Series
HercuLine 2000 series actuators incorporate the high quality and reliable features of the traditional HercuLine actuators with the added benefits of a microprocessor-based Enhanced Electronics Unit.
HercuLine 10260
The HercuLine 10260A medium-torque rotary actuator is engineered for exceptional reliability, accurate positioning and low maintenance.
HercuLink Software
HercuLink software enables access to programming and communication functions using RS485/Modbus communications that is standard with HercuLine actuators.
|
|
| Valve circular firebreak with blade swivelling for aeraulic conduits from 100 to 500 mms in diameter. Evolutionary case of order managing the equipment of release, indication and rearmament. Closing autocommandée by fuse or remote-controlled by suction cup with rupture or emission of current. Manual or motorized rearmament. Two models: pose sealed (Isone) or applies some (Isone/Ap). Two versions: with weak small overall dimensions or pressure losses (FdP version) (version EM). |
|
| ... products without technical information |
| |
Actuators for air dampers and smoke extraction dampers, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for air dampers and smoke extraction dampers, from 5 Nm to 100 Nm, in acc. with ATEX 94/9/EG for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with or without fail safe spring return function. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 0...10 VDC, 4...20 mA mode, 100 % overload protected, robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40°C to +40°C/+50°C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12x12 mm (size S) and 16x16 mm (size M). series ExMax-... for use in zone 1, 2, 21 and 22. series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal boxes and mounting brackets available. |
|
| Explosion-proof eletrico servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco, explosion-proof eletrico Servo-control for shutters tagliafuoco |
|
Sunnex SP Series Damping Pads
Sunnex SP-Series machine pads are used in many areas of industry to insulate machinery against the adverse effects of impact, vibration, structure borne noise, or simply to prevent slipping.
Advantages:
Easily designed to meet thickness and shape requirements
High resistance to grease, acid, oil, and cooling emulsions
Significantly reduces vibration
Easily sized for different configurations
Unique cell design offsets pad deflection
Applications:
Engines
Motors
Pumps
Compressors
Generators
|
|
AirLoc pads are designed to be homogeneous and are suited for a wide range of applications. 99% of all problems with vibrations, structure-borne sound and machine installation can be solved with the AirLoc system, which features:
a high degree of isolation efficiency
high damping and load-bearing capacity
level stability
a high coefficient of friction
homogeneous materials
high strength and good aging characteristics
BiLoc pads with unique profiles were specifically developed for low-frequency applications. They feature:
low natural frequencies
high coefficient of friction
long life |
|
Machines generate vibrations which are transmitted to the surroundings.
They can influence the manufacturing process of other machines and thereby the quality of the products. |
|
UNISORB® Vibration Isolation Pad Materials
Reduced vibration contributes to more efficient operation and longer life of costly machinery. UNISORB's job engineered isolation pads substantially reduce vibration and noise transmission. Installations are fast, easy and inexpensive.
Harmful effects of vibration and noise may cause serious impairment to the efficiency of workers and the overall effectiveness of production machinery. Proper use of these products will:
- Improve the efficiency of production equipment
- Provide a safer, more desirable environment for workers
- Reduce down time and extend the operating life of machinery
- Prevent floor damage |
|
Fabreeka® resilient laminated fabric pad is a scientifically designed and manufactured material composed of layers of tightly twisted, closely woven lightweight duck. Each layer is impregnated with an elastomeric compound containing mold and mildew inhibiting agents. The properties of Fabreeka® are exceptionally suited for the reduction of impact shock, vibration and structure-borne noise.
Some features and benefits of Fabreeka® pads:
- Do not have a shape factor
- Exhibit relatively high damping (C/Cc -.14)
- Creep effects are reduced to a limit of 5% of original thickness
- Operating temperature limits are -65°F (-55°C) to 200°F (95°C)
- Unusually high compressive strength - 12,000 psi
- Impervious to most oils and solvents
- Resist effects of steam, water, mildew and brine
- Can be supplied in nominal thicknesses of 1/16" (1.6 mm) up to 1" (25.4 mm)
- Thicker sections can be supplied by bonding standard thicknesses together
- Can be custom fabricated to any shape or size (see OEM section for samples of fabricated parts)
Some practical aspects and considerations when using Fabreeka® pads:
- Provides stability and limited motion
- Should be used with rigid support for best performance
- Connections to isolated system should be made flexible
- Avoid metal-to-metal contact in mount attachments by including Fabreeka® Bushings and Washers |
|
Noise sources, of mechanical wears, discomfort, the vibrations are unbearable and can generate large damage (phenomenon of resonance).
Being based on its control of anti-vibratory qualities of elastomers, company WATTELEZ conceived various lines of goods which absorb any type of vibrations effectively.
Available in studs, feet, plates or mattress, anti-vibratory Wattelez are declined in many products adapted to all the frequencies to reduce and cancel the vibratory transmissions. According to the site and the type of machine to be isolated, lighter with most massive, you are sure to find, among the references the WATTELEZ, anti-vibratory most effective for more stability and of longevity of your machine and for a comfort of maximum work. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
