Industrial pumps

Do you need help making a decision?  Take a look at our buying guide
729 companies | 7,714 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
Search
Industrial pumps | Choosing the right pump
The media that needs to be transported is very important when choosing a pump as the characteristics of the pump depend on its viscosity (i.e. the fluid’s resistance to a uniform flow), its suction temperature and whether or not there are solid elements in it. You will need to determine if the media to be transported is chemically neutral or corrosive  in order to choose the pump designed to operate under these conditions. As a general rule, the more viscous...
water pump
water pump
Type 70M

Flow: 9.8 l/min
Pressure: 2,500 bar - 3,000 bar
Power: 33, 30, 45, 41 kW

... high pressure pumps of the M-series deliver pressure levels of up to 3000bar. The M-series pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central ...

See the other products
WOMA GmbH
water pump
water pump
Type 150M

Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

See the other products
WOMA GmbH
water pump
water pump
Type 190M

Flow: 34 l/min
Pressure: 2,000 bar - 3,000 bar
Power: 124 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

See the other products
WOMA GmbH
oil pump
oil pump
3417 series

Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C

... on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with ...

See the other products
Dropsa spa
lubricant pump
lubricant pump
12130

Pressure: 3.3 bar

Pump for applications with built-in reservoir and easy operation: simply pull the handle upwards with a quick movement and then release to deliver lubricant. Pump is applied with a seal on the flange ...

See the other products
Dropsa spa
oil pump
oil pump
341 series

Pressure: 150, 130 bar

Hand Pumps Series 3415 and 3416 have been designed to be used with Serial 26. Pumps of sturdy construction and reliability; steel body, hardened and lapped double acting steel piston ...

See the other products
Dropsa spa
peristaltic pump
peristaltic pump
TPV AD

Pressure: 0 bar - 0.772 bar

... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...

See the other products
Aalborg Instruments
peristaltic pump
peristaltic pump
TPU AD

Pressure: 0 bar - 0.848 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

See the other products
Aalborg Instruments
peristaltic pump
peristaltic pump
TPU DP

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

See the other products
Aalborg Instruments
water pump
water pump
LB-A series

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...

See the other products
TSURUMI MANUFACTURING CO., LTD.
slurry pump
slurry pump
HSD

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW

The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...

See the other products
TSURUMI MANUFACTURING CO., LTD.
water pump
water pump
LSC series

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... LSC pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve ...

See the other products
TSURUMI MANUFACTURING CO., LTD.
fuel oil pump
fuel oil pump
OptiLine series

Flow: 10 l/min - 1,200 l/min
Pressure: 0 bar - 16 bar

Magnetic coupled. Sealless. Leak-free pumps. Optimal MGO and heavy fuel oil applications in the marine industry. IMO OptiLine magnetic coupled pumps, also called magnetic drive or mag drive pumps, ...

See the other products
IMO AB
oil pump
oil pump
E4 series

Flow: 10 l/min - 850 l/min
Pressure: 0 bar - 100 bar

... three screw pump. Flow rate per revolution 9.8 - 307 cm3 in 14 steps. The three screws, the central driven screw – the power rotor – which meshes with the two sealing screws – the idler rotors –are the only rotating ...

See the other products
IMO AB
fuel oil pump
fuel oil pump
ACD series

Flow: 10 l/min - 42 l/min
Pressure: 0 bar - 7 bar

The ACD pumps come in two executions; Lube Line and Fuel Line. The main difference is the shaft seal design; V-seal - optimized for light duty and T-seal - heavy duty respectively. The ACD pump is used ...

See the other products
IMO AB
chemical pump
chemical pump
AHP series

Flow: 0.05 l/min - 23.1 l/min
Pressure: 6 bar - 2,931 bar
Length: 450 mm

The Hi-Force AHP series of air driven hydrostatic pressure testing pumps offer a choice of eight models with output pressure capacities ranging from 6 bar (87 psi) to 2931 bar (42500 psi). All models are suitable for ...

See the other products
Hi-Force Hydraulic Tools
diesel pump
diesel pump
BP3000

Flow: 30, 50 l/min
Pressure: 1.5 bar
Power: 300, 310, 80 W

... minutes. BP 3000 diesel transfer pump is equipped with a vane motor with a sintered rotor and acetal resin vanes that ensures greater power and precision in the dispensing phase. The By-Pass valve integrated in the pump ...

See the other products
PIUSI
diesel pump
diesel pump
E80

Flow: 100, 70 l/min
Pressure: 0 bar - 3 bar
Power: 750, 550, 500 W

... , as well as other industrial applications. With its solid and resistant body and the compact cast iron structure makes the E120 electric pump the perfect system for performance and ...

See the other products
PIUSI
diesel fuel pump
diesel fuel pump
E300

Flow: 0 l/min - 550 l/min
Pressure: 1.8 bar
Power: 1,500 W

... agriculture, this electric pump with open impeller for diesel transfer is the perfect solution if you are looking for a high-performance product that is reliable over time. HIGH PERFORMANCE the E300 diesel transfer ...

See the other products
PIUSI
water pump
water pump
2620 series

Pressure: 100, 50 bar

... over-hard water.Easy to use: for pumping, testing and bleeding with a single button.Small size for the tightest of locations.3 pump models for your seal tests (for leak testing on water installations- plumbing, individual ...

water pump
water pump
M series

Flow: 0.24 l/min - 8.2 l/min
Pressure: 15.5 bar - 517 bar
Power: 0.33 ch

... bar) • Pressures to 25000 psi (1724 bar) • All Hydraulic fluids, water (plain or DI), solvents, mild chemicals, liquefied gases

See the other products
Haskel
water pump
water pump
4B series

Flow: 0.6 l/min - 6.55 l/min
Pressure: 48 bar - 517 bar
Power: 0.75 ch

Key Features • One model available in 9 ratios • Output pressures to 15000 psi (1034 bar) • Flows to 1.5 gpm (5.7 l/min) • Choice of wetted materials • Single air head • Drive pressure 3 psi to 100 psi (.2 to 7 bar)

See the other products
Haskel
water pump
water pump
XH series

Flow: 0.15 l/min - 13.1 l/min
Pressure: 28 bar - 1,103 bar
Power: 2 ch

... pressure 3 to 100 psi (.2 to 7 bar) When using high pressure ratio pumps the reliability of the XH models (-452 through -1373) will be improved with an air driven supercharge pump, not only to simplify ...

See the other products
Haskel
food product pump
food product pump
SPX®

Flow: 5,000 l/h - 14,000 l/h

... directly into the bowl. Driving the centrifuge directly from the motor minimizes energy lost in the process, enables more compact designs and reduces the maintenance that gear-or belt-driven systems might require otherwise.

See the other products
Waukesha Cherry-Burrell
food product pump
food product pump

Flow: 30 us gal/min
Pressure: 10 bar
Fluid temperature: 149 °C

Mixers And Blenders / Shear Pumps Designed for "on-line" continuous shearing and mixing action. FEATURES A choice of modularly interchangeable stators and rotors makes it versatile for processing a wide variety ...

See the other products
Waukesha Cherry-Burrell
food product pump
food product pump
Universal 2 PD

Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...

See the other products
Waukesha Cherry-Burrell
diaphragm pump
diaphragm pump
P3

Flow: 0 l/min - 4 l/min
Pressure: 0 bar - 6 bar
Head: 60 m

Diaphragm pumps Fluid connections: 1/4” BSP Air connection: 4 mm Max Suction Lift Dry: 3 m Max Suction Lift Wet: 9,8 m Max Solid passing: 2 mm Noise level: 62 dB Max Viscosity: 5.000 cps Displacement per Stroke: 18 CC~

See the other products
Fluimac srl
pneumatic pump
pneumatic pump
P4

Flow: 4 m³/h
Pressure: 6 bar
Head: 60 m

Fluid connections 1/4” BSPP Air connection 1/8” BSPP Max. Flow rate 4 lt/min Max air pressure 6 bar Max delivery head 60 mt Max Suction Lift ...

See the other products
Fluimac srl
diaphragm pump
diaphragm pump
P8

Flow: 8 l/min
Pressure: 6 bar
Head: 60 m

See the other products
Fluimac srl
sampling pump
sampling pump
SP28

Pressure: 0.06 MPa
Weight: 500 g

... resistance of the pipette pump components: (1) Pump head material: aluminium alloy; (2) Piston material: stainless steel. 06 End position optical detection End position optical detection. ...

See the other products
Keyto Fluid Technology
sampling pump
sampling pump
5A66

... Syringe Pumps Series, we also call Integrated sampling precision system is a precision sample addition component independently developed by Keyto. Its main function is to realize accurate and quantitative liquid aspiration ...

See the other products
Keyto Fluid Technology
metering pump
metering pump
5J0X series

Pressure: 0 MPa - 0.6 MPa
Head: 2 m - 4 m
Input diameter: 0.3 in

... 5J05,5J07,5J10.5J13) Its main function is to achieve accurate quantitative filling of liquid. The metering pump bracket and its transmission structure are compact and have high suction and discharge ...

See the other products
Keyto Fluid Technology
vortex pump
vortex pump
Turo®

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

See the other products
Emile Egger & Cie SA
vortex pump
vortex pump
Turo® TA

Flow: 180 l/s
Pressure: 16 bar
Head: 100 m

... without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content of fibers - All viscous media - ...

See the other products
Emile Egger & Cie SA
propeller pump
propeller pump
RP series

Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m

The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...

See the other products
Emile Egger & Cie SA
food product pump
food product pump
A series

Flow: 1.2 m³/h - 55 m³/h
Pressure: 10, 5 bar
Fluid temperature: 150 °C

... Eccentric Disc Pumps have been known for their reliability, durability and cost effectiveness, earning a reputation as the ideal pumping technology for some of the harshest applications in the world. With thousands operating ...

See the other products
MOUVEX
food product pump
food product pump
C series

Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C

... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...

See the other products
MOUVEX
chemical pump
chemical pump
SLC series

Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm

... durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series pumps ...

See the other products
MOUVEX
peristaltic pump
peristaltic pump
ALHX65

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

See the other products
Albin Pump
peristaltic pump
peristaltic pump
ALH100

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

... cement flooring CHEMICAL INDUSTRY : various acids, PVDF latex, alcohol, soap, non aromatic solvents FOOD INDUSTRY : tomato sauce, mash potatoes, gelatin, beer yeast, fish paste, olive oil, wine. PAINT ...

See the other products
Albin Pump
metering pump
metering pump
KM2

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...

See the other products
Albin Pump
water pump
water pump
MPS

Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm

... fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x 365 mm). Although this mini pump ...

chemical pump
chemical pump
P

Flow: 50 l/min
Pressure: 70 bar - 5,000 bar

... pressure and flow rate combinations for applications in the oil & gas, automotive, gas processing, hose manufacturing, and other industrial sectors. The P-Series pneumatic pumps can be ...

water pump
water pump
CombiTherm Plus series

... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Compact, ...

See the other products
Johnson Pump
water pump
water pump
CombiProLine

Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m

... duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...

See the other products
Johnson Pump
clear water pump
clear water pump
CombiMagBloc

Flow: 0 m³/h - 280 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m

... limited eddy current losses Silicon carbide pump liquid lubricated internal bearings Heating jackets optional PT 100 temperature monitoring Interchangeable with existing ISO 2858 pumps Suitable ...

See the other products
Johnson Pump
micro pump
micro pump
XP Series

Flow: 0 l/min - 2.1 l/min
Pressure: 0 mbar - 400 mbar
Fluid temperature: -25 °C - 55 °C

... range of -25 to 55 °C, with this unique set of features Disc Pump enables advances across a broad spectrum of Gas Sampling, Detection, Monitoring and Analysis applications. All of our pump ...

micro pump
micro pump
BL Series

Flow: 0 l/min - 1.65 l/min
Pressure: 0 mbar - 300 mbar
Fluid temperature: 5 °C - 40 °C

... Micropump The BL Series Disc Pump, low cost micropump strikes a balance between performance and cost. Like all Disc Pumps, the Disc Pump combines silent operation, pulsation-free flow, ...

micro pump
micro pump
LT Series

Flow: 0 l/min - 1.2 l/min
Pressure: 270 mbar
Fluid temperature: -25 °C - 40 °C

... Series Disc Pump – long lifetime micropump has been optimised for long service life, delivering in excess of 5,000 hours continuous operation under the most demanding conditions. Over 5,000 hours, cycling 20,000 times ...

internal-gear pump
internal-gear pump
ROTAN® HD

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...

See the other products
DESMI Pumping Technology A/S
solvent pump
solvent pump
ROTAN® ED

Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...

See the other products
DESMI Pumping Technology A/S
solvent pump
solvent pump
ROTAN® GP

Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C

Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...

See the other products
DESMI Pumping Technology A/S
water pump
water pump
APS 51

Flow: 36.5 l/min - 53.9 l/min
Pressure: 30, 40, 20 bar
Power: 0.3 kW - 5.2 kW

3 diaphragms in NBR (Desmopan® and Viton available on request). Parts in contact with spray liquid: anodized aluminium. Standard: safety valve. On request: pressure accumulator and PTO protection. Cataphoresis treatment on motorpump versions.

See the other products
COMET Spa
water pump
water pump
PKWT series

Flow: 11 l/min - 13 l/min
Pressure: 0 bar - 150 bar
Power: 3.7, 3.1 kW

Reciprocating plunger pump, 3 solid ceramic plungers, nickel brass plated head, aluminum die cast crankcase with cataphoresis coating, double sealing system, hardened steel crankshaft, oversize roller/ball bearings. The ...

See the other products
UDOR S.p.A.
water pump
water pump
IOTA series

Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW

The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...

See the other products
UDOR S.p.A.
water pump
water pump
ZETA 70 series

Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW

The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...

See the other products
UDOR S.p.A.
filter pump
filter pump
MC4

Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C

Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...

See the other products
Siebec
chemical pump
chemical pump
MC10

Flow: 0.38 m³/h
Power: 10 W
Fluid temperature: 80 °C

Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...

See the other products
Siebec
filter pump
filter pump
MC 15

Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C

... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

See the other products
Siebec
slurry pump
slurry pump
HY18

Flow: 80, 100 m³/h
Pressure: 200, 350 bar
Head: 28 m

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

See the other products
DRAGFLOW
slurry pump
slurry pump
HY 24

Flow: 75, 250 m³/h
Pressure: 350, 300 bar
Head: 47 m

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

See the other products
DRAGFLOW
slurry pump
slurry pump
HY85-180

Flow: 450, 1,000 m³/h
Pressure: 300, 350 bar
Head: 63 m

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

See the other products
DRAGFLOW
clear water pump
clear water pump
AG series

Flow: 0.3 m³/h - 9.6 m³/h
Pressure: 6, 10 bar
Head: 16.5 m - 68 m

... self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to its low weight. The AGA-AGC self-priming ...

See the other products
EBARA PUMPS EUROPE
water pump
water pump
FP 70 series

Flow: 0.85 l/min
Pressure: 2 bar
Head: 20 m

KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. ...

See the other products
KNF NEUBERGER
exhibit your products

& reach your clients in one place, all year round

Exhibit with us