|
|
StockerYale SpecBright™ LED Ringlights are the brightest LED illuminators in their class. Based on our patented chip-on-board technology, these modules are manufactured with a high LED packing density and excellent thermal management.
Compared to illuminators fabricated with T-Packs or other individually packaged LEDs, StockerYale SpecBright™ LED Ringlights offer several times the brightness, for modules of comparable size. The illuminators combine up to 100 individually mounted LED chips with a single high quality aspherically corrected fresnel lens, to deliver a high level of illumination over a selected field of view with excellent uniformity.
These high performance ringlights are ideal for OEMs, system integrators and end users who require energy efficient, long lasting illumination sources. The illuminators are available in a wide range of wavelengths, as well as white. They can be operated in continuous (CW) or pulsed mode.
|
|
|
Nichia expresses colors for single and multi-color products by using "x,y" color coordinates. The color coordinate values are based upon the CIE1931 Color Chart. This method was adopted by Nichia, since most companies use these values to express color.
|
|
SLLUB Backlights by PHLOX® offer the BEST LIFE CYCLE,
THE BEST CHROMATICITY STABILITY AND THE BEST LUMINANCE on the market,
all in an ultra compact and IP-65 body.
Backlight 200x200 SLLUB:
- Luminance Minimum: 40.000 cd/m2 (up to 280 000 in strobe mode)
- Uniformity Minimum: 95 % (+/- 10%)
- Input current: 2 A
- Expected life: > 100 000 hours
Application: Lighting for industrial vision
|
|
SLLUB Backlights by PHLOX® offer the BEST LIFE CYCLE,
THE BEST CHROMATICITY STABILITY AND THE BEST LUMINANCE on the market,
all in an ultra compact IP-65 body.
Backlight 100x100 SLLUB:
- Luminance Minimum: 60.000 cd/m2 (up to 420 000 in strobe mode)
- Uniformity Minimum: 95 % (+/- 10%)
- Input current: 1 A
- Expected life: > 100 000 hours
Application: Lighting for industrial vision
|
|
SLLUB Backlights by PHLOX® offer the BEST LIFE CYCLE,
THE BEST CHROMATICITY STABILITY AND THE BEST LUMINANCE on the market,
all in an ultra compact IP-65 body.
Backlight 50x50 SLLUB:
- Luminance Minimum: 70.000 cd/m2 (up to 500 000 in strobe mode)
- Uniformity Minimum: 95 % (+/- 10%)
- Input current: 440 mA
- Expected life: > 100 000 hours
Application: Lighting for industrial vision
|
|
The PHLOX® High Bright white LED Backlights are a new generation of backlights which enhances the MTBF and the efficiency, superior to competitive systems. PHLOX® technology is the result of several years of research in optics and electronics.
Backlight for 4ATI LCD NVIS:
- Luminance on the backlight (typical): 6000 cd/m2 - NVIS 200 cd/m2
- Luminance on the backlight (max.): 7000 cd/m2 - NVIS 700 cd/m2
- Luminance trough LCD: 660 cd/m2 (11%) - NVIS 21 cd/m2
- Input current (typical): 0.3 A - NVIS 0.03 A
- Input current (max.): 0.36 A - NVIS 0.2 A
- Power Consumption (typical): 6.3 W - NVIS 0.6 W
- Expected life: 50 000 hours (with typical luminance)
Application: Aerospace, backlight for LCD
|
|
The PHLOX® High Bright white LED Backlights are a new generation of backlights which enhances the MTBF and the efficiency, superior to competitive systems. PHLOX® technology is the result of several years of research in optics and electronics.
Backlight for 3ATI LCD NVIS:
- Luminance on the backlight (typical): 7000 cd/m2 - NVIS 200 cd/m2
- Luminance on the backlight (max.): 8000 cd/m2 - NVIS 700 cd/m2
- Luminance trough LCD: 770 cd/m2 (11%) - NVIS 21 cd/m2
- Input current (typical): 0.25 A - NVIS 0.03 A
- Input current (max.): 0.32 A - NVIS 0.2 A
- Power Consumption (typical): 5 W - NVIS 0.6 W
- Expected life: 50 000 hours (with typical luminance)
Application: Aerospace, backlight for LCD
|
|
The PHLOX® High Bright white LED Backlights are a new generation of backlights which enhances the MTBF and the efficiency, superior to competitive systems. PHLOX® technology is the result of several years of research in optics and electronics.
Backlight for 12" LCD NVIS:
- Luminance on the backlight (typical): 12000 cd/m2 - NVIS 100 cd/m2
- Luminance on the backlight (max.): 16000 cd/m2 - NVIS 1400 cd/m2
- Luminance trough LCD: 1320 cd/m2 (11%) - NVIS 11 cd/m2
- Input current (typical): 2.75 A - NVIS 0.6 A
- Input current (max.): 3.5 A - NVIS 1 A
- Power Consumption (typical): 60 W - NVIS 11 W
- Expected life: 50 000 hours (with typical luminance)
Application: Aerospace, backlight for LCD
|
|
The PHLOX® High Bright white LED Backlights are a new generation of backlights which enhances the MTBF and the efficiency, superior to competitive systems. PHLOX® technology is the result of several years of research in optics and electronics.
Backlight for 20" LCD NVIS:
- Luminance on the backlight (typical): 6000 cd/m2 - NVIS 100 cd/m2
- Luminance on the backlight (max.): 8000 cd/m2 - NVIS 485 cd/m2
- Luminance trough LCD: 660 cd/m2 (11%) - NVIS 11 cd/m2
- Input current (typical): 2 A - NVIS 0.1 A
- Input current (max.): 3.5 A - NVIS 0.5 A
- Power Consumption (typical): 50 W - NVIS 2.1 W
- Expected life: 50 000 hours (with typical luminance)
- Weight: 2,68 kg (5.9 lbs)
Application: Aerospace, backlight for LCD
|
|
Copal develops and manufactures slim high-luminance backlights (light-conduction plates) for ultra-fine liquid crystal displays using our high-grade optical design, high-precision die design, and high-precision processing technologies. Backlights are used in mobile phones, portable navigation devices (PNDs), etc., manufactured by major manufacturers.
Liquid crystal backlights (light-conduction plates)
Our advanced technology provides high image quality, such as uniform-surface luminescence using one LED lamp. The ultra-thin liquid crystal backlight (light-conduction plate) is manufactured using high-grade fine shape processing technology.
|
|
| ... products without technical information |
| |
Highlights HLWQE 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Hart-coated aluminium housing for improved wear and corrosion protection
- Protection from electrostatic charge and polarity reversal
- Choose between spot or area light
- Special lens holder for maximum luminance
- Insentive to vibration and temperature changes
|
|
The CLB series LED bar light provides longer service life with lower power consumption and less heat generation than conventional fluorescent lamps.
* 24V DC (No polarity)
* Light lengths available in 100mm, 200mm and 332mm.
* LED colors available in clear/white, red and amber.
* 300lx luminous intensity at 50cm. (CLB-24N-C type)
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable illumination over wide operating temperature range from 30°C to 60°C.
|
|
The CLF series high power LED work lights in various lengths and colors provide long service life and maintenance-free operation.
* 24V DC (No polarity).
* High power 1,700lx illumination* for precise work operation. (*Luminous intensity at 50cm, CLF20-24-C type)
* Light length available in 130mm and 230mm.
* LED colors available in red, amber and clear/white.
* Water and dust-proof IP67 construction.
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable illumination over wide operating temperature range from 30°C to 60°C.
|
|
The CLT series IP66G/IP67G rated oil and water resistant LED light bar for the extreme use environment.
* High power LEDs provide long service life, maintenance free operation, low current consumption as well as low heat generation which cannot be realized by conventional fluorescent light.
* Uniform light distribution at the high luminous intensity of 500lx at 50cm with 16 high power white LEDs.
* Ideal illumination for the workplace inspection light as LED illumination does not emit the flicker or stroboscopic effect.
* 24V DC (No polarity).
* IP66G/IP67G construction with robust aluminum body and tempered glass cover.
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable operation over wide temperature range from -30°C to 60°C.
* Three wiring options available depending on the installation;
1. CLT30-24S-CD: Side wiring type
2. CLT30-24L-CD: Multi-drop wiring type
3. CLT30-24T-CD: Terminal block wiring type
|
|
|
|
|
|
FLAT LED - LED Flood Light
FLAT LED - A machine luminaire with minimal height, maximum luminous power and intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current. The impressively flat design is the result of innovative Waldmann optics technology. It produces a beam angle of 60º, which ensures large-scale, uniform illumination of the processing area. As a result, process reliability and productivity are increased.
Characteristics:
* FLAT LED - maximum light with minimum height - perfect for machines with small installation space.
* Intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current.
* PLUG - fast installation, thanks to integrated LED operating device.
* LIGHT - safe operation without stroboscopic effect and minimal heat build-up.
* High-performance LEDs with a service life of 50,000 hours.
* Available in FLAT LED mounted / integrated version.
* Absolutely waterproof - system of protection IP 69K.
|
|
LED Machine Luminaire SLIM LED
The SLIM LED is the lighting solution for machines and equipment with space-constraints and limited installation space.
The sleek profile of the luminaire is not one millimeter higher and wider than necessary.
The luminous power, in contrast, is tremendous. SLIM LED luminaires are
equipped with the latest LED technology.
This allows large-scale and powerful illumination of machine workplaces.
In addition, the light emission direction can be individually adjusted.
SLIM LED luminaires are available in lengths ranging from 196 to 1176 mm - flood lighting made to measure.
|
|
SPOT LED 003. PLUG + LIGHT
Waldmann underscores its claim as an innovation leader with the new machine luminaire SPOT LED 003:
- No stroboscopic effect.
- Intelligent circuit board.
- No heat generated in the direction of the light beam.
- Depending on the application, the SPOT LED 003
can be flexibly used as either a spot or area light.
- Service life up to 50,000 hours or around 6 years of continous operation.
- Insensitive to vibrations and knocks.
- High blue proportion in the light of the LEDs promotes
concentration and motivation.
- Compact dimensions.
|
|
LED Magnifier Luminaire
RING LED
The RING LED is the lighting solution for
the precise examination of parts in
numerous fields of application - from
mechanical engineering to research and
development.
The use of six innovative LEDs instead of a conventional fluorescent tube provides critical added value: 4 times more light per watt, thus considerably lower energy consumption.
The integrated high-tech optics focuses the light on the work surface. Loss of lighting due to diffusion is therefore minimized and the light is optimally used.
|
|
| ... products without technical information |
| |
Presses & Mould-clamps
Now LED is extending its service with an offer to study and manufacture presses and mould-clamps for polyurethane foam injection.
Our strengths : Price, quality, customized design, technical support and meeting deadlines.
|
|
Presses & Mould-clamps
Now LED is extending its service with an offer to study and manufacture presses and mould-clamps for polyurethane foam injection.
Our strengths : Price, quality, customized design, technical support and meeting deadlines.
|
|
High pressure polyurethane injection machines
From the beginning, LED was involved in solving production and maintenance problems for polyurethane converters. To best reduce and eliminate these limits to productivity, and in response to our customers’ express requests, we developed our own range of high pressure polyurethane injection machines.
|
|
|
|