|
|
The strong point of the threephase model OIL 440 is that it can separate the vacuumed swarf and liquid and return the filtered liquid to the machine tool where it can be used again.
The machine is equipped with an ejection pump , so the liquid can be expelled during the vacuuming operations, in this way using the vacuum is fast and efficient ("E" version) in the same time.
|
|
|
The Tecnoil range is especially designed to suck up, clean and recycle the oil and coolant on machine tools. Single and three-phase models from 3 to 15 HP, capacities from 150 to 700 litres.
|
|
HeoloS industrial suction units, HSP series, represent the best solution for sucking greases, emulsions, cooling fluids, mud and slush.
besides being fitted with a unit for the elimination of fluids, HSP suction units are fitted with an elimination pump and a scrap filtering basket with floater.
Thanks to the practical reverse flow system, standard on all HeoloS suction units, the HSP range is suitable to suck large quantities of greasy substances that after an effective filtration and the separation of the scrap material, can be reintroduced into the machine.
|
|
The oil vacuum DM35 / 40 OIL is the newly designed vacuum unit designed by Delfin, with a special regard to the engineering and mechanical industry.
Compact and sturdy, entirely built in steel, and available in 2 or 3 motors version, the DM OIL guarantees great mobility. It is fit with a detachable container (100 lt. capacity) fit with a sieve grid, enabling the suction and separation of liquids such as oil or coolant, mixed with metal shavings and chips, and their easy and safe disposal.
Additional features such as a level indicator, a tangential suction inlet with inbuilt cyclone and a floating device to stop the suction when the liquids fill in the tank, make the DM OIL the perfect vacuum for applications in engineering, workshops and machine tools maintenance
|
|
Tecnoil is a vacuum unit specifically designed for the engineering, automotive and mechanical industry; it includes a vacuum unit, a separation / filter unit, and a collection and rapid discharge unit.
It is especially suitable to vacuum up liquids such as cutting oil and coolant, mixed with solid particles (metal chips and shavings), to separate them and filter the liquid to the required level (from 300 down to 6 micron), in order to make it possible to use it several times thanks to an inbuilt powerful discharge pump, and reduce stand by times of machine tools to minimum levels.
Available in both single and three phase version, or as air operated, Tecnoil is specifically designed and suitable for CNC machines, lathes and other machine tools.
|
|
|
The TANK-VAC draining appliances enable users to collect industrial fluids with or without filtering them. They extract swarf/chips, sludge and sediments that they separate from the fluid collected, and then release the fluid either directly or following a fine filtration process, so that it can be re-used immediately.
|
|
| ... products without technical information |
| |
Oil Tank
Sunfab offers its own range of hydraulic oil tanks ST 250 with a number of functional improvements necessary for high performance hydraulic systems.
Sunfab ST 250 radically reduces the air mixture in the hydraulic oil with an oil pipe around the return filter and a tried and tested baffle plate design. Air mixture is the main reason behind noise and cavitation of the pump.
Sunfab ST 250 features an external breathing filter, which is fitted in a protected position to reduce the risk of clogging. The filter is connected to the tank via a hose.
Sunfab ST 250 is supplied complete with correctly dimensioned connections, filter and brackets.
The oil tank is available in two different materials:
- ST 250 A in aluminium
- ST 250 S in stainless steel
|
|
Bunded Heating Oil Tanks - Tuffa 10000 VB
Product description :
- A cabinet to house all appropriate equipment
- 2" BSP fill connection c/w cap and chain
- vent
- Watchman contents gauge
- 1" Bottom outlet (top outlet available on request)
- Battery bund / overfill alarm located within the cabinet
- Overfill prevention valve
Optional Extras
- Fire Protection
- Higher accuracy gauge
- Armco protection barrier
|
|
|
The new tank systems, such as WERIT safety tanks Techno K and E, offer numerous advantages in terms of safety and space savings: they are light-weight, clean and anti-corrosive and can be set up as battery, multi-block and angle systems. Thanks to their compact dimensions they are easy to handle, even in tight areas. A second exterior tank made entirely of plastics allows direct installation in the central heating room and makes the use of an oil pan, additional mason work and triple protective coating absolutely redun-dant. Anyone who installs a WERIT tank will be pleased with the additional space they now have available for other uses.
|
|
In the oil reservoir all oil coming from oil separator is stored and cooled down. Any refrigerant trapped within the oil is boiled of.
The size of oil reservoirs required is determined by the number of compressors connected, compressor oil charge, system refrigeration charge and operating conditions.
|
|
Features
- Oil Vent plug
- Suction pipe 1'' 1/2
- Return connection
- Filter Flange
- Support
- Level indicator
|
|
Range supplements from 100 to 3300 liters, on casters, feet, sleeves, with lid.
Containers out of polyester very solid and light, easy of maintenance thanks to the smooth walls and to the corners rounded, being able to contain foodstuffs like many chemicals.
|
|
| ... products without technical information |
| |
Our oil power plants range from 1 to 300 MW. High efficiency, low emissions and proven long-term reliability make these plants suitable for stationary and floating baseload, as well as stand-by applications. Worldwide deliveries of our liquid-fuelled power plants exceed 28 GW.
Modular design
The modular design of our oil power plants enables fast-track delivery anywhere in the world. Our 100 MW power plant can be in commercial operation in as little as nine months from order placement.
Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size stepwise by adding or removing generator sets. This means you can get started with a smaller initial investment.
|
|
|
|
|
|
Our field power plants range from 1 to 300 MW. Proven reliability, fuel flexibility and low emissions make the plants suitable for demanding applications in the oil and gas industry, such as processing facilities, pump stations, compressor stations, marine terminals etc.
Modular design
The modular design of our field power plants enables trouble-free installation and fast-track delivery anywhere in the world. Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size by adding additional generating sets. This means you can get started with a smaller initial investment.
Multifuel capability
Our power plants can be run on either associated gas or crude oil, residual or diesel oil. This enables the operator to choose the fuel with the lowest price and best availability. The system is also tolerant against fuel quality variations and as such suitable for oil field power generation.
|
|
|
MAN Diesel offers a wide range of engines for stationary power generation. Outstanding fuel flexibility is one of our core competences. Our system expertise ranges from captive power generation for applications in the cement, textile, mining or oil and gas industries, to power solutions for municipalities, utilities or independent power producers.
|
|
JP FAUCHE Energie - Electro Diesel is a subsidiary of the JP. FAUCHE GROUP which is specialised in manufacturing specific generating sets of any power rating. Electro Diesel also offers a complete range of generating sets.
Electro Diesel has invested in human resources and highly performing industrial tools. Our production facilities are spread over more than 4,500 m², and include 4 production departments and assembly shops fitted with overhead travelling cranes ranging from 2.5T to 20T, a body shop, numerically-controlled machines, 2 spray booths and 2 computerised test benches for fuel oil and gas engines.
With these resources, we can provide you with precise solutions to all your problems concerning power generation, no matter what they are. We are in a strong position thanks to our skills in research and design; this is why we can help and advise you throughout your industrial project.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
