|
|
|
Complementing PerkinElmer Optoelectronics long history of linear cameras are todays newest and most advanced models: the LC3000 analog, the LD3500 CameraLink and LVDS cameras, and the YD5000 color cameras. Available in a variety of pixel sizes, resolutions, speeds, and outputs, PerkinElmer''s full line of linear cameras find their homes in leading edge applications such as currency inspection, print inspection, postal sorting, small parts sorting, motion picture digitization, glass inspection, and web inspection.
|
|
The SmartBlue™ digital cameras are designed for high line rate applications with low to moderate light conditions and where small size, and low cost are required.
The New SmartBlue™ digital linescan cameras incorporate the latest in photodiode array technology based on the industry standard Reticon® devices with state of the art electronics and a robust industrial camera housing. The linescan photodiode array is a Pinned Photodiode Charge Couple Device which allows for high sensitivity, fast readout, while maintaining high dynamic range, and low image lag.
The New SmartBlue™ cameras are cost effective high performance digital linescan cameras, and feature a CameraLink™ digital interface. These cameras feature geometrically precise photodiode CCD image sensor with 14 um square pixels with a resolution of 2048 pixels. This "next generation" array can achieve data rates up to 80 MHz with superior noise immunity, precise linearity, and high CTE.
|
|
|
The Piranha3 camera family takes imaging to a new level with eight outputs running at 40 MHz and either 8k or 12k resolutions. The camera's 12k resolution surpasses the resolution of any other line scan camera, delivering more detail with fewer cameras in a multi-camera system for measurable cost savings. Additional system cost-savings stem from the Piranha3's superior sensor alignment accuracy, high responsivity and optimized pixel pitch, 5 µm (12k) and 7 µm (8k).
|
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution
a compact, high sensitivity linescan camera used in sorting applications.
|
|
|
The new mvBlueLYNX design with its fast PowerPC processor covers video sensor and intelligent camera applications. Easy development and smooth integration in your network offer a significant reduction of time-to-market for image processing solutions. The compact, integrated design forms the base for reliable usage in harsh environments.
|
|
|
|
|
|
|
Thanks to its 400 MHz (3,200 MIPS) DSP, the VCLine scan Smart Camera from Vision Components is one of the fastest intelligent cameras on the market. The device supports three integration modes: the free-running mode enables a scan rate of 11 kHz. With a constant integration time, the camera can be triggered externally at a maximum scan rate of 5,5 kHz. A third mode allows for a variable integration time which is determined by external triggering, reaching a maximum scan rate of 11 kHz. The Smart Camera comes equipped with 32 MB DRAM and 4 MB Flash EPROM for program and data storage. It features both an Ethernet and a RS232 interface as well as four digital PLC inputs and four outputs, an image trigger input and a flash trigger output. Due to its small dimensions (90 x 50 x 35 mm), the VCLine can be easily integrated into machines and plants. Like all other Smart Cameras from Vision Components, it is especially suited for use in rugged industrial environments – due to its compact and robust housing, it withstands vibrations and shocks.
|
|
| ... products without technical information |
| |
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
|
C2PL range offers a full CNC automatic line for punching and shearing angles for an excellent price quality balance. It is a Geka exclusive solution being the first step into the CNC lines withy an excellent value for money.
|
|
CNC complete line automatic solution for punching, marking and shearing of medium and large size angles. Thanks to its great design and excellent finishing, ALPS will allow you to produce a great range of pieces at a low cost at with an excellent quality. The great flexibility of the ALPS allows processing plates and even plates.
Thanks to the available options that Geka offers, ALPS line can be customized for ever customer depending on its specific needs.
|
|
|
|
|
|
TECHNICAL FEATURES AND STANDARD EQUIPMENT:
The APS is the perfect line to have a quick punching and cutting activities for profiles from 30x30 to 160x160x19 mm equipped by:
- A strong main body welded.
- Feeding system equipped by rollers driven by Brushless motor
- Separate Encoder for the feeding lenght management
- N. 2 punching units of 80 Tons, with axes driven.
- N. 1 cutting unit for profiles
- With standard equipment you can fit punches and dies from 5 mm up to 32 mm.
- Feeding units 6 meters
- CNC system for axes X, Y e Z management and punching cutting activities
- Pieces counter
- Set up for a different length, holes numbers and coordinates
- Programs archive
- Display Diagnostic System
- Hydraulic control unit complete with oil.
- CE certificate of conformity
SOFTWARE:
The APS is equipped with the latest generation of software. The program can work with the pieces saved in a data base and also enables designs of several pieces in one, nesting different parts in a sequence optimising the smallest amount of wasted material.
A DXF or DSTV converter is also available as option having the possibility to import and convert these files.
|
|
ALFA range is designed for automatically punching, marking and shearing of profiles. Therefore, the final part is obtained in a whole and single process increasing the efficiency and erasing loss of time.
Automatic line CNC controlled for punching, marking and shearing profiles. This solution is ideal for metallic constructors. The bars (flat bars up to 500x400 mm, and angles up to 150x150x15 mm) up to 12 m long are pushed and clamped by a carriage. Material is always guided by lateral roller against line reference.
|
|
|
CNC line to fulfil the punching, marking and shearing of medium sized angles. Fully controlled by CNC, SPS will allow you processing large amount of angles in an easy, efficient and precise way. Thanks to the available options that Geka offers, SPS line can be customized for each customer depending on its specific needs.
|
|
|
|
|
|
VP Marking, punching, drilling and shearing line for angle sections
VP range: VP 150 VP 160 VP 180 VP 200 VP 206 S VP250 - D
VP machines cover all machining operations: marking, punching, drilling and shearing.
The high-pressure system (400 bars) reduces production times and currently makes it possible to attain production rates of more than 1,000 operations per hour. Punching machines incorporate NC backmarking. The number (2 to 6) of punching units and the related power (50 to 93 tons) vary according to the size of the angle sections to work and the number of different diameters in each flange. The single-cut type shear (from 160 to 500 tons) prevents loss of metal and distortion. Blades do not need to be changed.
Highly appreciated by manufacturers of transmission towers and electrical steel towers, the automatic VP marking, punching, drilling, shearing lines for angle sections are controlled by a single operator. Reliable and designed for highest productivity, various types of works may be programmed.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
|
These are the most modern, rapid and flexible CNC lines to punch angles. Their main features are: low-cost; easy installation; automatic feeding; easy programming; flexibility for small/medium size pieces; new productivity concept. Besides the punching and shearing stations, a daisy wheel marking unit and a multifunctions unit, that can be "dressed" with extremely useful optional equipments such as double punching, notching and marking tooling, are also available. Angles are fed by means of a carriage with pincher in order to guarantee precision in positioning and reduced scrap.
|
|
|
The UGC Vibrating Densitometer accurately measures the density of a flowing fluid at actual operating conditions. This Densitometer was primarily developed for extremely accurate fluid metering (custody transfer), plus many other applications, such as pipeline interface detection, blending, process control, etc. The frequency output of the Vibrating Densitometer is compatible with most flow computers.
|
|
The contactless and continuos measurement of the density of liquids or bulk material is requested in even more than the following applications:
Concentration measurement of acid, alkali, saline solution and suspension
Crystallisation and polymerisation monitoring
Determination of the solid matter content in slurries, in flue gas desulphurisation suspensions, in aluminium production and in mining
Measurement of the bulk density in washing powder and clinker
|
|
|
|
|
|
The Thermo Scientific range of Sarasota liquid (gas) density meters measures density or density related variables within the oil and gas, petrochemical, chemical, food and beverage and general process industries. These high accuracy online continuous meters provide key information for process monitoring and control, quality control, product interface detection and custody transfer applications.
The Sarasota FD910 Industrial Density Meter is designed for high accuracy measurement of general process liquids and slurries, giving continuous online density or density related measurement with straight-through flow. Built to be insensitive to plant/pipeline vibrations, it has a wide operating temperature span and options to suit an extensive range of applications.
The Sarasota FD950 Chemical Density Meter is designed for the high accuracy measurement of aggressive liquids and slurries. It provides continuous online density measurement, providing straight-through flow in a compact and lightweight design. Accurate to 0.1kg/m3, it has a wide operational density range of 0 to 2100kg/m3.
The Sarasota FD960 Fiscal/Custody Transfer Density Meter is designed for high accuracy measurement of high value process liquids and slurries. Using straight-through flow, the Sarasota FD960 provides continuous online density measurement. It has a wide operating temperature span, low pressure drop and a high flow rate capability and is suitable for use in hazardous areas.
|
|
Microwave measurement for the sugar industry
An important parameter for the sugar production is the concentration of the sugar massecuite. Measurement of the dry substance content, usually represented as Brix is absolutely essential in order to optimize, control and improve the sugar quality.
Based on experience in process control, BERTHOLD TECHNOLOGIES provides products, which exactly match the instrument needs and expectations of customers producing sugar.
We offer specially designed microwave sensors for measurements in product pipelines, dissolved sugar containers, crystallizers and at other process locations. The Micro-Polar Brix provides accurate, reliable online concentration measurements of the sugar magma over the entire process.
|
|
Density Meter Series DIMF 2.0
Swagelok-screw joints, flange DN 15 PN 40, milk threads according to DIN 11851 PN 10
accuracy ± 0,2 kg/m³
reproducibility 0,05 kg/m³
operating temperature according to design -40°C to 210°C Accessoires
electronical transmitter
pre-amplifire
strainer
gas separator
processing peripherals
Density Meter Series DIMF 2.1
flange DN 25 / 50 PN 40
accuracy ± 0,2 kg/m³
reproducibility 0,05 kg/m³
operating temperature according to design -40°C to 150°C
|
|
|
The DENSITRAK® Model D625 liquid density meter utilizes the spring mass principle for measuring the fluid density. A portion of the "u" tube is energized to vibrate at its natural resonant frequency by using an electrical feedback driving system. A change in the vibrating mass, (as a result of change in the fluid density) shifts the resonant frequency. A CSI SPUD signal processing unit for density uses temperature, pressure and the shift in frequency to determine the density of the measured fluid.
|
|
|
|
|
|
PROCESS LIQUID IN-LINE DENSITY METERS DC-50 SERIES
LEMIS process DC-50 series of process in-line meters has been carefully engineered for continuous measurement of liquid density to fit large range of applications.
LEMIS process use streamlined resonant tube which is washed on either side by measured liquid. The oscillation period of the vibrating tube and its frequency characteristics depend on behaviour of the measured liquid allowing simultaneous and accurate direct measurement of density and concentration.
Large offer of factory pre-built installation packs allows quick and simple field installation with minimal pipeline disturbance or process downtime. The meter supplied with rigorous factory calibration for density. The DC-50 series proves high accuracy and long-term calibration stability insensitive to mounting position, plant vibration, process flow rate and pressure variations.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
Applications
: In-line density measurement of liquids or multiphase-mixtures
Special features:
Reliability
Robust construction with magnetic transmission of measured values.
Can be used in hazardous areas.
No by-pass required
Wide and clear scale
|
|
General description :
DensiCheck
Controlling product quality and specification is increasingly important to process managers nowadays. Optimum cost control, costly rework and keeping process within tolerance limits are the common headaches for today's managers. Meeting these demands is easy with DensiCheck. In-line concentration measurement is the key. DensiCheck offers continuous process measurement at a very economic price.
Our DensiCheck systems are being used to measure concentration in many different aqueous solutions, including:
* Acetone
* Beer
* Chromic Acid
* Ethylene Chloride
* Hydrochloride Acid
* Hydrogen Peroxide
* Methanol
* Phosphoric Acid
* Sodium Hydroxide
* Sucrose
* Ammonium Hydroxide
* Calcium Hydroxide
* Ethanol
* Ferric Chloride
* Hydrofluoric Acid
* Isopropyl Alcohol
* Nitric Acid
* Sodium Chloride
* Soft Drinks
* Sulphuric Acid
|
|
|
|
see the results for the following category : 
