|
|
Carl Zeiss offers a whole camera family in monochrome and color:
The AxioCam HR has a resolution bordering the optical limits with up to 12 Megapixel via Microscanning for your routine and research tasks.
The MR allround-camera is a very economical solution with an adequate resolution for all applications in material analysis.
The AxioCam MRc5 color camera with 5 Megapixel resolution and FireWire-data interface offers quickly generated, high resolution and absolutely color fast images at an excellent price-performance ratio. |
|
ProgRes® Microscope camera
ProgRes® microscope camera family offers suitable models for all contrast methods in light microscopy. A ProgRes® microscope camera can easily be integrated into each laboratory via C-Mount and Firewire interfaces.
Exact reproduction of colors and finest details in a digital image are basis for demanding analysis and reliable documentation.
In routine, research or fluorescence: the ProgRes® microscope camera family offers the right camera for each application in light microscopy. |
|
Lumenera offers a wide range of cameras based on high performance sensors, providing a variety of unique capabilities to satisfy your imaging applications.
|
|
pco.1300 oem
This versatile high performance 12 bit CCD camera system is specifically designed for OEM applications. The pco.1300 oem has an extraordinary quantum efficiency of up to 65 %. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 oem’s most unique feature is its flexibility for customization to fit any OEM user application. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 8 e¯ rms @ 10 MHz, selectable regulated cooling to -30 ºC vs. ambient, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as biochip reading, fluorescence imaging, confocal & light microscopy etc.. |
|
sensicam em
The new generation of electron multiplication (emCCD) CCD sensors is integrated into the proven sensicam camera system. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor (delta of -45°C vs. ambient temperature) and an outstanding quantum efficiency (up to 65%) achieving a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light emCCD camera system is perfectly suited for scientific imaging (e.g. microscopy, bio marker and label imaging) and for night vision applications. |
|
| ... products without technical information |
| |
AUTO-MONTAGE FOR PERFECTLY FOCUSED 3D IMAGES
World's leading software for achieving in focus images of your 3D samples
Do you have problems getting all of your sample into focus?
Suitable for all applications
Can be used with your existing image capture system
Suitable for Optical and Stereo Microscopes and SEMs
Modular system, allows you to choose your level of automation and functionality
Depth and colour relief maps, to show height details of your sample
Anaglyph images, to view your sample as a 3D image
Flexible image and data reporting
Image enhancement functions, to optimise your image results
Comprehensice 2D and 3D measurement facilities, for increased accuracy
3D Surface Viewer, for dramatic views of your sample
Automatic Z Control, collect large numbers of images very quickly |
|
| ... products without technical information |
| |
In cell research, particularly in neurophysiology, complex measurement set-ups with fragile glass electrodes, such as those used in the patch clamp method, are gaining a key role for microscopic examination of all kinds of preparations. For example, brain section preparations are observed under an upright-positioned microscope as electrical signals are conveyed. In the experiment, fine glass electrodes are positioned to simulate efferent neurons. While signals are transmitted using these electrodes, the preparation under the microscope may not be moved with respect to the measurement test equipment set-up or the microscope. This means that moving the slide, for example, to position an additional electrode beyond the viewing field, would disconnect the preparation from the electrodes transmitting the signals. In this case, it is necessary to move the entire microscope with respect to the preparation. The microscope must be moved with the same or, ideally, with relatively high accuracy as expected of a conventional microscope X-Y stage used in such applications. The dimensions and load of a microscope that can weigh up to 40 kg pose a special challenge, however.
Available in two versions, the LINOS XY 500 LS X-Y stage overcomes this challenge. The X and Y axes can be moved from the front, from the side or both can be moved from the front. This stage provides a large central hole for using the microscope base port, for example, for a camera in applications that employ an inverse microscope. An attractive option is the customer-specific hole pattern for fastening the particular microscope used – this pattern is available at no extra cost. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Capturing digital images of your samples is an essential requirement for most microscopists. However, obtaining high quality images with just the right colors at just the right resolution quickly and efficiently, requires the right kind of image capture system.
SYNCROSCOPY is world renowned in our ability to provide image capture systems that give you the finest quality digital images even of the most difficult samples including fluorescence and 3D subjects.
Whether you need the world's highest resolution, the world's finest color reproduction, high speed live images at full digital resolution, extended depth of focus or an entire sample mapped at high magnification - SYNCROSCOPY has the solution for you. |
|
SIMAGIS® SRID™ allows specialists to obtain objective quantitative data on immunoglobulin concentrations while diagnosing diseases and determining the immune status.
The product employs a simple and reliable method of estimating the concentration of immunoglobulines IgA, IgG, IgM in the serum and the biological liquids - Single Radial Immunodiffusion (SRID), using Manchini method. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Lynx VS8 is an advanced stereo zoom microscope for Printed Circuit Board inspection and is ideal for all electronics applications including fine pitch, surface mount, TAB and BGA technology.
The Lynx VS8 consists of a stable, high capacity scanning stage that provides free floating movement for all sizes of board, including double sided PCBs. Stage can be locked for precision inspection tasks (x-axis, y-axis, or both). Complete with earthing point for static safe inspection.
Lynx VS8 provides magnification from x7 - x40 within the standard zoom range. An oblique and direct viewer can also be added to the modular system allowing the operator to view a subject direct or from an angle of 34° from vertical, which can be rotated through 360°.
|
|
|
|
