|
|
Our VisionGauge® / Smart Camera Bundles are complete, all-in-one solutions for both imaging and machine vision applications. They include either the VisionGauge® or VisionGauge® OnLine software package as well as a Sony Smart Camera, a self-contained unit that includes a camera and PC that runs the Windows™ XPe operating system.
The VisionGauge® / SmartCamera Bundles come with everything fully installed and configured and are ready to run right away. They include all of VisionGauge's® powerful software tools. And because of VisionGauge's® simple and intuitive interface, they are extremely easy to setup and use.
The VisionGauge® / Smart Camera System Bundles are perfectly suited for a wide range of applications including industrial, imaging, microscopy, image analysis, machine vision inspection and quality control.
The VisionGauge® / Smart Camera Bundles include either the VisionGauge® or VisionGauge® OnLine machine vision software packages. |
|
Shad-o-Snap™ X-Ray Cameras
The Shad-o-Snap x-ray cameras make up Rad-icon's newest product line of easy-to-use, "smart" USB cameras. These microprocessor-based cameras offer simple timing control combined with new readout modes and easy image transfers as TIFF or raw integer image files. The Shad-o-Snap 1K and 4K cameras also feature our new 10 cm by 10 cm CMOS photodiode image sensor with 96 µm or 48 µm pixel spacing. These sensors feature an integrated direct-contact scintillator that is optimized for high resolution and sensitivity, ideal for applications ranging from biomedical imaging to industrial inspection.
The Shad-o-Snap cameras have been developed with ease-of-use in mind. The USB connection installs in seconds, and built-in Windows drivers are automatically loaded to communicate with the camera. We provide a simple software interface to control the camera and acquire images. Together with a laptop computer and optional battery pack, a truly portable x-ray imaging system can be created.
|
|
Shad-o-Box™ X-Ray Cameras
The Shad-o-Box x-ray camera is a stand-alone, high-resolution radiation imaging device complete with 12-bit digital interface. The large active area consists of one or more 512 by 1024 pixel photodiode array sensors with 48 µm pixel spacing. An integral phosphor screen shields the sensor from ambient light and converts incident x-rays or energetic particles to visible light that is sensed by the silicon photodiodes. The Shad-o-Box can be used in a wide range of applications including medical diagnostics, industrial inspection (NDT) and scientific imaging.
|
|
| The Shad-o-Box HS x-ray camera is a stand-alone, high-resolution radiation imaging device complete with 12-bit digital interface. The large 49.2 mm by 49.2 mm sensing area consists of a 512 by 512 pixel photodiode array sensor with 96 µm pixel spacing. An integral phosphor screen shields the sensor from ambient light and converts incident x-rays or energetic particles to visible light that is sensed by the silicon photodiodes. The camera is configured for real-time (up to 20 fps) operation and features low noise and excellent image uniformity, making it an ideal choice for use in a wide range of medical, industrial and scientific imaging applications. |
|
High-resolution Intensified X-ray digital camera
with direct coupled (micro) fibre-optic input and
water cooled CCD. Camera Quantum Efficiency of
65% @ 550nm at the scintillator emission
wavelength, interline transfer cooled CCD sensor
with typical T of > 35°C allowing shutter less
simultaneous exposure and read out cycles
with 100% duty cycle, a large input area,
variable data transfer rate, on-chip up to 10 x 10
pixel binning, sub-area readout and up to 1392 x
1040 pixel resolution at up to 12-bit digitisation
(fast data transfer rate for preview mode) or up to
16-bit digitisation WITHOUT BINNING. In 16 bit
mode the SAXEye-07 50HS delivers images with
over 225 000 electrons equivalent full well. |
|
IVC-3D smart camera:
the first and only device of its type
- Extremely rapid, reliable 3D image detection
- 2D programming for 3D results
- Lens, illumination, evaluation: all-in-one
- Determines profiles, volumes, shapes
For packaging, the food and semi-luxuries industry,
handling and warehousing systems, logistics,
pharmaceuticals, automotive, robotics |
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is another example of customization and application-specific solution:
a set of three linescan cameras embedded in a circular section PCB with their PCI grabber board used in a non-contact 3D measuring machine for the automotive industry. |
|
OEM Imaging Solutions
Apogee is a proven supplier of OEM imaging solutions. We can provide a modified version of any of our standard models or a completely new design to your requirements. Contact Apogee for more information on how we can be your preferred supplier of embedded imaging systems.
OEM Evaluation Program
We can help you choose the right sensor for the job. If we do not already support the sensor that you need, we can discuss adding it to our product line. Once a sensor has been chosen, we provide OEM customers with a system for evaluation. The best way to feel confident that our systems are right for you: try one out.
Cost
We supply the best price/performance in the industry. Researchers rely on Apogee to provide excellent value for their investment. OEMs rely on Apogee Instruments to make their products more cost effective and competitive. Please contact our sales team for a quotation for any quantity, large or small. We make it easy for you to get started with us.
Ease of Integration
All of our systems run on a single universal software driver. If you integrate control of one Apogee system into your custom software environment, you automatically have support for all of our systems. Based on the feedback we get from our customers, integration is simple and straightforward.
Broad Selection
We offer a wide selection of CCDs, from interlines to full frame front-illuminated to back-illuminated, from 512 x 512 up to 4096 x 4096. You can choose from a variety of sizes and shapes, from lowest cost to highest performance, knowing that you can build an entire product line around a single software integration |
|
DVL Series
LORD's high-sensitivity DVL Series of linescan cameras offer superior imaging performance.
Our linescan cameras feature C or F or Mamiya lens mounts. The standard Camera Link interface makes integration easy into existing systems and increases flexibility when it comes to connecting to various grabbers or changing cameras. Other interfaces are available on request. |
|
Alta Features
The Alta Design Team worked hard over a two year period to bring this advanced degree of integration and performance to our valued customers. Alta set new standards for imaging performance, connectivity, cooling, compactness, cost effectiveness, and the elimination of external support electronics.
Like the AP and KX series, Alta is a platform, not a CCD or specific interface type. It is designed for a variety of CCDs, ranging from the smallest to those measuring 36mm on a side with 4096 x 4096 arrays.
The Alta platform comes in 3 optical apertures. The D1 systems contain the small-mid size CCDs and maintain C-mount back focal distance. The D2 systems contain larger CCDs up to 28mm on a side. Our D7 systems accommodate very large CCDs such as the Kodak KAF-16801E, KAF-16803, and KAF-09000 sensors. Our newest addition, the D9s, provide the same aperture for these very large CCDs, but provide deeper cooling. |
|
The IPX-16M3-G/L is an advanced, high-resolution progressive scan, fully programmable and field upgradable CCD camera, build around KODAK's KAI-16000 interline transfer CCD. The camera provides 4832 x 3248 resolution and delivers 3 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and temperature monitor.
LYNX IPX-16M3-G, LYNX IPX-16M3-GC:
- 4872x3248 @3 fps
- Mono or Color, 8/10/12-bit data
- Gig E (Gigabit Ethernet), Single or Dual Tap
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Flat Field Correction
- Defective Pixel Mapping
- 802.3, Ethernet v2.0, IP, ICMP, UDP, and PING support
- Application, SDK, Drivers
- Custom Firmwares Available
LYNX IPX-16M3-L, LYNX IPX-16M3-LC:
- 4872 x 3248 @3 fps
- Mono or Color, 8/10/12-bit data
- Base Camera Link, Single or Dual Tap
- RS232 Serial Communication
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Flat Field Correction
- Defective Pixel Mapping
- Custom Firmwares Available |
|
The IPX-4M15-G/L is an advanced, high-resolution progressive scan, fully programmable and field upgradable CCD camera, build around KODAK's KAI-4021 interline transfer CCD. The camera provides 2048 x 2048 resolution and delivers 15 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and temperature monitor.
LYNX IPX-4M15-G, LYNX IPX-4M15-GC:
- 2048 x 2048 @ 15 fps
- Mono or Color, 8/10/12-bit data
- Gig E (Gigabit Ethernet), Single or Dual Tap
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Flat Field Correction - NEW FEATURE!
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional
- 802.3, Ethernet v2.0, IP, ICMP, UDP, and PING support
LYNX IPX-4M15-L, LYNX IPX-4M15-LC:
- 2048 x 2048 @ 15 fps
- Mono or Color, 8/10/12-bit data
- Base Camera Link, Single or Dual Tap
- RS232 Serial Communication
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Flat Field Correction - NEW FEATURE!
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional |
|
The IPX-2M30-G/L is an advanced, high-resolution progressive scan, fully programmable and field upgradable CCD camera, build around KODAK's KAI-2020 interline transfer CCD. The camera provides 1600 x 1200 resolution and delivers 33 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and temperature monitor.
LYNX IPX-2M30-G, LYNX IPX-2M30-GC:
- 1600 x 1200 @ 33 fps
- Mono or Color, 8/10/12-bit data
- Gig E (Gigabit Ethernet), Single or Dual Tap
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Flat Field Correction - NEW FEATURE!
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional
- 802.3, Ethernet v2.0, IP, ICMP, UDP, and PING support
- Application, SDK, Drivers
LYNX IPX-2M30-L, LYNX IPX-2M30-LC:
- 1600 x 1200 @ 33 fps
- Mono or Color, 8/10/12-bit data
- Base Camera Link, Single or Dual Tap
- RS232 Serial Communication
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction - NEW FEATURE!
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional |
|
The IPX-11M5-G/L is an advanced, high-resolution progressive scan, fully programmable and field upgradable CCD camera, build around KODAK's KAI-11000 interline transfer CCD. The camera provides 4000 x 2672 resolution and delivers 5 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and temperature monitor.
LYNX IPX-11M5-G, LYNX IPX-11M5-GC:
- 4000x2672 @5 fps
- Mono or Color, 8/10/12-bit data
- Gig E (Gigabit Ethernet), Single or Dual Tap
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Defective Pixel Correction - NEW FEATURE!
- Flat Field Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional
- 802.3, Ethernet v2.0, IP, ICMP, UDP, and PING support
- Application, SDK, Drivers
LYNX IPX-11M5-L, LYNX IPX-11M5-LC:
- 4000x2672 @5 fps
- Mono or Color, 8/10/12-bit data
- Base Camera Link, Single or Dual Tap
- RS232 Serial Communication
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Defective Pixel Correction
- Flat Field Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional |
|
The IPX-1M48-G/L is an advanced, high-resolution progressive scan, fully programmable and field upgradable CCD camera, build around KODAK's KAI-1020 interline transfer CCD. The camera provides 1000 x 1000 resolution and delivers 48 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and temperature monitor.
LYNX IPX-1M48-G, LYNX IPX-1M48-GC:
- 1000 x 1000 @ 48 fps
- Mono or Color, 8/10/12-bit data
- Gig E (Gigabit Ethernet), Single or Dual Tap
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional
- 802.3, Ethernet v2.0, IP, ICMP, UDP, and PING support
- Application, SDK, Drivers
LYNX IPX-1M48-L, LYNX IPX-1M48-LC:
- 1000 x 1000 @ 48 fps
- Mono or Color, 8/10/12-bit data
- Base Camera Link, Single or Dual Tap
- RS232 Serial Communication
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional |
|
1/3" HIgh Resolution, Day&Night
Built-in 3X Varifocal Lens Camera
- 1/3" Sony Super HAD color CCD
- Built-in 3X (3~9mm) varifocal lens with
auto iris
- Ultra High Resolution of 530TV lines
- 24/7 surveillance with Day&Night
capability
- Removed noise, ghosting effect with
SSNR
- 0.3 Lux (color) / 0.002 Lux (Sens-up
mode)
- White Balance : ATW / AWC / Manual
selectable
(Color Temperature 1800K~10,500K)
- OSD (On Screen Display)/ Privacy
Masking Motion Detection
- S/N ratio of 50dB
- Dual Voltage : AC 24V & DC 12V (N/P) |
|
Alta U Series
So many improvements in such a small package: No more external controllers, plug-in cards, or frame grabbers. Dual digitization for high precision plus high speed focus. On-board camera memory for fast local sequences and no worries about transfer interruptions. Time delayed integration for imaging far beyond the size of the sensor. A single 12V power input for optional battery-powered operation. |
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution
a compact, high sensitivity linescan camera used in sorting applications. |
|
Ultraviolet (UV) option
An increasing number of applications make use of UV light. This makes surface artifacts appear in greater clarity and allows visualization of even smaller features.
The DVL Series cameras are offered with a UV-sensitive option for resolutions of 512, 1024 and 2048 pixels. These cameras incorporate a high-sensitivity imager with fused silica windows for use in the UV down to 200nm. |
|
The Tocsin 102C Series CCTV Cameras provide big performance in a compact easy to install and operate package. The 102C series is ideally suited to application such as room occupancy, area/door entry and fixed equipment or area monitoring. This is particularly true where size is an issue and conventional pan-tilt-zoom units cannot be fitted. The cameras are available with a wide range of lens options and can be adjusted for different focal points and depth of view. Fully immersible versions are available to a depth of 20M.
To compliment the 102C a range of accessories is available for video capture, display and transmission. LED light modules are also available as well as glare shields, mounting brackets and junction boxes.
Features:
18-32 VDC Supply
Both PAL and NTSC Versions Available
Available for use with standard Co-Ax or twisted pair cable
Sapphire windowed for superior optical transmission and damage resistance.
All 316 stainless steel housing
Wide temperature range from -20 to +65 Degrees Centigrade
|
|
| The compact Quadtek R890 CCTV camera is designed for harsh environments. The marine grade alloy enclosure is suitable for applications where explosion proof, corrosion resistance, lightweight, and strength are required. The video output is either standard composite or balanced twisted pair, enabling video transmission at distances of up to one kilometer. Imaging |
|
The Alta U16M uses a very large format 16-megapixel full frame sensor with microlensing and anti-blooming gates, ideal for applications requiring large field of view, such as sky surveys and radiology.
4096 x 4096 array, 9 x 9 micron pixels
5 MHz 12-bit and 1 MHz 16-bit digitization
32 Mbyte camera memory
USB 2.0 interface: no plug in cards or external controllers
Programmable, intelligent cooling to 40ş C below ambient
Binning up to 8 Horizontal x 4095 Vertical
Subarray readout and fast sequencing modes
Precision time delayed integration readout
Programmable fan speed for low / zero vibration
Two serial port outputs for control of peripheral devices
General purpose programmable I/O port
External triggering and strobe controls
ActiveX drivers included with every system (other software sold separately)
Field upgradeable firmware
Self-test capability with data simulators
Fused silica windows
Runs from single 12V supply with input voltage monitor
Compact enclosure
Programmable status indicators |
|
Apogee Instruments Inc has been in development of a low cost, high performance follow on to the successful Alta line. This camera fills the current void of lower cost cameras with higher speed and smaller footprints.
Apogee Instruments offers a broad range of professional imaging solutions. Over the years we have built an impressive list of satisfied customers. We are confident that you will find a solution to fit your needs at a cost that won't break your budget.
Contact our Sales Department with any questions you may have about our products or would like to pre-order an Ascent system. |
|
Alta Scientific Imaging Systems
Highest Speed, lowest noise, 16/12 bit dual digitization to >10MHz, TEC cooling to >55C. Lifetime warranty on CCD chamber seal. Fast USB 2.0 and 100Base-T Network Interfaces, advanced I/O control. The Alta imaging systems represent cost effective advanced imaging technology not found anywhere else.
For a full listing of Alta Series models please see:
Alta U Series USB 2.0 Cameras
Alta E Series Network Cameras
Apogee Instruments offers a broad range of professional imaging solutions. Over the years we have built an impressive list of satisfied customers. We are confident that you will find a solution to fit your needs at a cost that won't break your budget. |
|
The IPX-VGA210-L is an advanced, high-resolution progressive scan, fully programmable and field upgradable CCD camera, build around KODAK's KAI-0340 interline transfer CCD. The camera provides 640 x 480 resolution and delivers 210 frames per second at full resolution. The camera image processing engine is based on a 1 million gate FPGA and 32 bit RISC processor, featuring programmable resolution, AOI, binning, triggering, shutter, long integration, transfer function correction and temperature monitor.
LYNX IPX-VGA210-G, IPX-VGA210-GC:
- 640 x 480 @ 210 fps
- Mono or Color, 8/10/12-bit data
- Gig E (Gigabit Ethernet), Single or Dual Tap
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- 802.3, Ethernet v2.0, IP, ICMP, UDP, and PING support
- Automatic Iris Control - optional
LYNX IPX-VGA210-L, IPX-VGA210-LC:
- 640 x 480 @ 210 fps
- Mono or Color, 8/10/12-bit data
- Base Camera Link, Single or Dual Tap
- RS232 Serial Communication
- 32-bit Risc Processor
- Horizontal and Vertical binning
- Programmable Resolution and Frame Rate
- Programmable External Trigger
- Dynamic Transfer Function Correction
- Dynamic S/N Correction
- Defective Pixel Correction - NEW FEATURE!
- Temperature Monitor
- Field upgradable software, firmware, LUT
- Automatic Iris Control - optional |
|
Features:
Full 512 x 512 pixel resolution up to 2,000 frames per second (fps)
10-bit monochrome, 30-bit color CMOS sensor with large 16 µm pixels for increased sensitivity
Recording at frame rates up to 32,000 fps
Global electronic shutter to 4µs
Memory segment feature - enables 64 different recordings to be made in one session
IRIG or GPS timing is recorded in real time on every frame - not appended later
Lightweight tethered camera head enables easy access to hazardous or hard to reach locations
Camera can be controlled via Photron Gigabit Optical Network, Ethernet, FireWire and Keypad
Image memory can be expanded to facilitate 3 second record duration at maximum resolution at all speeds for 2,000 fps and faster, and 6 seconds at 1,000 fps
Dual Speed Recording mode allows the frame rate to be changed "on the fly" during a recording |
|
| The APX-i2 brings the many benefits of an intensified head to the ultima APX. Providing true mega pixel resolution (1,048,576 ten bit pixels per frame) to 2,000 frames per second (fps) and with gating down to twenty nanoseconds, the intensified head is swappable with either the monochrome or color camera heads on any existing ultima APX system; meaning one APX processor can support ALL three different camera heads without needing retuning or modification. Another real nice feature of the ultima APX-i2 is the ability to offset sequential frames by as little as one nanosecond. This enables cyclical events, such as inkjet printer operation to be recorded with one image per cycle, and as little time as a single nanosecond between frames to give an apparent equivalent framing rate of 1,000,000,000 fps at mega pixel resolution! For applications requiring a fast and truly cyclical framing rate, the APX-i2 retains the APX's ability to operate as fast as 120,000 fps and preserves all the features that have made the ultima APX the best selling mega-pixel camera in the world. |
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution:
a compact, high sensitivity linescan camera used in genomic instrumentation for the biotechnology industry. |
|
|
