|
|
SILICON VIDEO 1310C is a 10-bit Bayer Pattern color camera system with the advantages of high resolution progressive scan image capture, low noise digital signaling, convenient software control, the availability of extensive processing, measurement, and analysis capabilities, and low cost. XCAP software provides control of all camera operations.
SENSOR BY KODAK - SILICON VIDEO 1310C camera is based on the KAC-1310 CMOS sensor from Eastman Kodak Company. This progressive scan sensor offers continuous and single frame rolling shutter modes, windowing, sub-sampling, anti-blooming, 10 bit dynamic range, and an active programmable array resolution of 1280 x 1024 pixels. Visit the Kodak web site for detailed sensor specifications.
SILICON VIDEO ® 1310C Camera Head
Infrared Cut Filter
Data, Communication & Power Cable
PIXCI ® D2X1 Digital Frame Grabber
XCAP-Lite Imaging Program
1280 x 1024 10-bit capture @ 14.5 fps
Sequence Capture (XCAP-Ltd or Std)
Triggered Sequence Capture
132 MB/s Burst Transfers
Camera Integration and Reset Control
PCI Bus: 32 or 64 bit, 3.3 or 5 volt
Win XP/2K/NT/ME/98/95 & LINUX |
|
eyeMAX chip-on-the-tip technology sets new standards in laparoscopy with the latest generation CCD endoscopes. The image sensor, directly fitted within the distal tip of the endoscope, ensures clear and needle-sharp images.
The spirit of vision - Chip-on the tip endoscope. The 10 mm and 5mm laparoscopes are available with an angle of view of
0° and 30°.
Advantages
The 30° version has been provided with a mechanica l image correction system.
The direction of view can be turned through 360° b y rotating
this wheel.
The perfect depth of sharpness adapted for laparoscopy ensures relaxed simple handling during the entire duration of the operation.
Focussing is never required.
A high-contrast image is produced as only one group of optical lenses is located in front of the CCD sensor.
The camera cable and the light guide cable can be removed, which facilitates the hygienic reprocessing.
Two individually programmable buttons remotely control the functions
The unit can be autoclaved and is suitable for machine reprocessing.
|
|
pixelfly qe
This high performance digital 12bit CCD camera system features state of the art in CCD and electronics technology. The pixelfly qe has an extraordinary quantum efficiency with up to 65%. The system consists of an ultra compact camera head, which either connects to a standard PCI or a compact PCI board via a high speed serial data link. The available exposure times range from 5µs to 65s. A digital temperature compensation is integrated instead of a space consuming thermo-electrical cooling unit. All camera functions can be remotely accessed and controlled via digital interface. This compact digital CCD camera system is perfectly suited for many scientific and industrial imaging applications, like microscopy, spectroscopy and quality control. |
|
pco.1200 s
This high speed 10bit CMOS camera system comprises advanced CMOS and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 820MB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs to 5s. This digital CMOS camera system is perfectly suited for high speed camera applications such as material testing, external crash testing or super slow motion movie clips.
|
|
pco.2000
This high resolution 14bit CCD cooled camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (2048 x 2048pixel) and low noise (down to 10e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.).This digital CCD camera system is perfectly suited for low light camera and piv camera applications. |
|
sensicam em
The new generation of electron multiplication (emCCD) CCD sensors is integrated into the proven sensicam camera system. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor (delta of -45°C vs. ambient temperature) and an outstanding quantum efficiency (up to 65%) achieving a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light emCCD camera system is perfectly suited for scientific imaging (e.g. microscopy, bio marker and label imaging) and for night vision applications. |
|
pco.1300 oem
This versatile high performance 12 bit CCD camera system is specifically designed for OEM applications. The pco.1300 oem has an extraordinary quantum efficiency of up to 65 %. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 oem’s most unique feature is its flexibility for customization to fit any OEM user application. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 8 eŻ rms @ 10 MHz, selectable regulated cooling to -30 şC vs. ambient, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as biochip reading, fluorescence imaging, confocal & light microscopy etc.. |
|
sensicam uv
This UV sensitive cooled digital 12bit camera system comprises advanced CCD and elctronics technology. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor down to -12°C and an outstanding quantum efficiency in the UV range of the spectrum (QE 15% @254nm and 10% @193nm). Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light UV camera system is perfectly suited for scientific imaging (e.g. metrology, semiconductor quality control, nano particle measurements and bio label imaging) applications. |
|
pco.1600
This high dynamic 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (1600 x 1200pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.). This digital CCD camera system is perfectly suited for low light camera applications like fluorescence imaging and microscopy.
|
|
pco.4000
This high resolution 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 128MB/s. The system features thermo-electrical cooling (delta vs. ambient -45°C), a superior high resolution (4008 x 2672pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days. This cooled digital CCD camera system is perfectly suited for low light and high resolution camera applications, like microscopy, aerial photography or quality control.
|
|
pco.1300 solar
This versatile high performance 12 bit CCD camera system is specifically designed for electro luminescence (EL) applications in the range of 850nm - 1200nm. The pco.1300 oem has an extraordinary quantum efficiency of up to 11 % @ 900nm. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 solar’s most unique feature is its increased sensitivity in the NIR range of the spectrum. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 7 eŻ rms @ 10 MHz, selectable regulated cooling to 5 şC, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as solar cell quality control, NIR fluorescence imaging, EL applications etc.. |
|
hsfc pro
Having a single optical input, this camera system comprises a image splitter unit, four intensified CCD camera modules with fast switchable MCP image intensifiers and high resolution CCD image sensors. Each module with its 12 bit dynamic range and a high resolution CCD image sensor features an excellent signal-to-noise-ratio and the ability of single photon detection. Four high speed serial fiber optic data links connect the system to the PC. It can be triggered externally by light or electrical input. |
|
dicam pro
This is a high performance intensified CCD camera system with gating times down to 1.5 ns. With its 12 bit dynamic range and a high resolution CCD image sensor it features an excellent signal-to-noise-ratio and the ability of single photon detection. The system is suited for applications in environments with high electromagnetic disturbances. A high speed serial fiber optic data link connects the system to the PC. The camera can be triggered by light or electrical input. |
|
sensicam qe
This high performance cooled digital 12 bit CCD camera system comprises advanced CCD and electronics technology. The system features thermo-electrical cooling of the image sensor (down to – 12 °C), extremely low noise (down to 4 e- rms) and an outstanding quantum efficiency, which achieves a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 500 ns (fast shutter) to 3600 s (long exposure). A high speed serial data link connects the system to the PC (fiber optic link available). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as fluorescence imaging, confocal & light microscopy etc.. |
|
pixelfly vga
This high performance digital 12 bit CCD camera system features state of the art in CCD and electronics technology. The system consists of an ultra compact camera head, which either connects to a standard PCI or a compact PCI board via a high speed serial data link. The available exposure times range from 10 µs to 10 s. A digital temperature compensation is integrated instead of a space consuming thermo-electrical cooling unit. All camera functions can be remotely accessed and controlled via digital interface. This compact digital CCD camera system is perfectly suited for many scientific and industrial imaging applications, like microscopy, spectroscopy and quality control. |
|
Industrial-Grade Design...
In-Sight 5000 Series vision systems are the only family of vision systems available today the provide industrial-grade features standard. That means rugged die-cast aluminum and stainless steel cases that can withstand the punishment of vibration, and sealed M12 connectors and protective lens cover for IP67 and IP68 rated protection against dust and moisture. It all adds up to peace of mind on the factory floor.
Unmatched Performance...
The new In-Sight® 5600 is the highest-performance vision system on the market, with vision tool speeds more than two times faster than previously available on the In-Sight 5400 models. It is equipped with a full library of proven Cognex vision tools including an advanced OCR tool that's easy to train and a calibration routine for measurement and robotic guidance applications. |
|
Ranger Multiscan - Several feature images from one camera!
With Ranger in MultiScan mode you are able to acquire 3D shape, and intensity data such as gray scale, gloss, laser scatter and other important data simultaneously from one single camera.
All feature images are captured simultaneously when the object passes the camera in a line scan mode. The images are transferred to your PC via CameraLink or Gigabit Ethernet for easy system integration. The speed and performance is extremely high thanks to SICK IVP’s unique and patented sensor technology. MultiScan is the solution for any in line inspection task where 2D or 3D alone does not solve the problem.
You have to see the defect to detect it!
|
|
In-Sight® is a family of powerful and flexible vision sensors that are tough, industrial and extremely easy to use. In-Sight has become the standard of end users and system integrators for automated inspection and product quality assurance even under the most difficult of factory floor conditions.
Combining high speed processing, the world most powerful library of vision tools and IP67 rated housing, In-Sight delivers premium performance for industries' most challenging vision applications.
In-Sight can be used individually or multiple In-Sights can be networked together to inspect products at every manufacturing stage on every production line.
In-Sight is now available with PatMax - the revolutionary high accuracy object location tool. With up to 10 times greater accuracy than other pattern matching technologies, PatMax easily handles variations in part appearance caused by process variations, reflective surfaces, partial occlusion, lighting changes or general production noise. |
|
| Camera Link is a manufacturer spanning standardized interface for the digital data transfer between camera and frame grabber. Due to high transmission bandwidth Camera Link is predestined for image processing tasks. Further advantages of Camera Link are easy integration and low priced cable concepts. The Kappa 12 Bit digital cameras with CameraLink interface are equipped with Camera Link interface and work according to the base configuration. The camera series is based on variable camera electronics, low power consumption, advanced circuitry, and an extremely rugged design with an excellent signal quality at the same time. The user can choose between color or black-and-white systems, high-quality CCD sensors by Sony and Kodak with megapixel resolution and various interfaces (FireWire/IIDC compatible, CameraLink, GigE). |
|
| Measuring 44x44x56mm, these compact cameras offer the same performance as our enhanced USB 2.0 camera line, delivering outstanding image quality and value. Features include new locking industrial mini USB and RJ45 GPI/O connector, multiple mounting points, 60 fps at full 640x480 resolution, 100+ fps at 320x240 binning mode, and on-board processing and sensitivity provide outstanding image quality. Both color and monochrome product models are fully supported by the Lumenera Software Developer’s Kit with an application programming interface compatible with C++ and Visual Basic. |
|
Kappa DX – Digital Cameras with FireWire Interface
Kappa DX camera systems are complete systems ready for installation. The camera series is based on variable camera electronics, low power consumption, advanced circuitry, and an extremely rugged design with an excellent signal quality at the same time. The user can choose between color or black-and-white systems, high-quality CCD sensors by Sony and Kodak with megapixel resolution and various interfaces (FireWire/IIDC compatible, CameraLink, GigE).
The digital cameras with FireWire interface comply with the highest standards and offer outstanding Kappa-specific technological highlights, as for example: rugged construction, excellent highly linear signal quality, extraordinary signal-to-noise ratio, camera-internal real-time color signal processing, long-time exposure and optional a second serial interface, camera-internal signature function with crypto-chip, image memory, etc. |
|
| Kappa has successfully extended its camera range with Gigabit Ethernet cameras. The GigE CCD cameras allow cable lengths of up to 100m/330ft (CAT5E) and are available with various sensors; in color, monochrome or cooled versions, with megapixel resolution, frame rates of up to 30/90 Fps and „short trigger delay“ (6,75 micro sec.). The Kappa Software Pool offers three different tools: The camera control software KCC, the software development kit (sdk3) for integration into third-party software interfaces, and the application software KIB for standard measurement tasks. Special Kappa features like the camera-internal color processing and the camera-internal signature creation are also available for the GigE camera model range. The new Kappa Catalog 2008 provides more detailed information about the 40 GigE Cameras and their prices. |
|
Ranger - The fastest camera in the world for three dimensional shape measurement!
The Ranger camera measures 3D features at unmatched speed producing a complete data set of the object measured. Providing a 3rd dimension adds height and shape measurement data, which can be critical when correctly classifying an object. Ranger is the key component in many market leading in-line inspection machines used in the Electronic, Semicon, Wood, Robot Vision, Plastic, Rubber and Food industries.
The Ranger acquires up to 35,000 profiles per second, each containing up to 1536 high quality 3D coordinates. This is more than 45 million 3D points per second!
The complete 3D calculation is done inside the camera and the ready-to-use 3D coordinates are sent directly to a standard PC via CameraLink or Gigabit Ethernet. This eliminates the need for expensive post processors.
|
|
| Measuring 44x44x56mm, these compact cameras offer the same performance as our enhanced USB 2.0 camera line, delivering outstanding image quality and value. Features include new locking industrial mini USB and RJ45 GPI/O connector, multiple mounting points,60 fps at full 640x480 resolution, 100+ fps at 320x240 binning mode, and on-board processing and sensitivity provide outstanding image quality. Both color and monochrome product models are fully supported by the Lumenera Software Developer’s Kit with an application programming interface compatible with C++ and Visual Basic. |
|
Ruler E: ideal for inline applications
with 3D scanning
- Rapid, contrast-independent 3D measurement
- Camera, laser, fixed optics in extremely
robust housing
- Calibrated 3D profiles
- Measurement data output via rapid Gigabit
Ethernet interface
- Can be integrated in PC applications
- Simultaneous detection of several objects
For the wood processing industry, packaging, handling
and warehousing systems, logistics, pharmaceuticals,
automotive, robotics, the food and semi-luxuries industry |
|
DVLC Digital Color Camera
This camera incorporates a trilinear CCD sensor - one separate row of pixels for each color on a single sensor - thereby removing the need for an expensive 3-sensor and beamsplitter system. Built-in spatial correction ensures optimal RGB signals synchronization for excellent color image quality. The DVLC camera accomodates Nikon F lenses. The standard Camera Link interface makes integration easy into existing systems and increases flexibility when it comes to connecting to various grabbers or changing cameras. Other interfaces are available on request. |
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is another example of customization and application-specific solution: a complete (image capture and analysis) analytical imaging sub-assembly used in an automated microbiological control equipment for the food industry. |
|
|
|
