|
|
Visible phenomena are not the only ones of interest for scientific or industrial applications; uv imaging for UV laser beam alignment and diagnostic, semi-conductor mask alignment, lithography, etc are increasingly important. Our cameras sensitive in the UV and low energy X ray region use the latest solid state device technology and offer the following capabilities:
40% quantum efficiency at 200nm can be achieved with new interline chip while offering very good noise characteristics at high frame rates.
High resolution is also available with UV sensitivity with 1.3 million pixels on several CCD chips.
IEEE 1394 (Firewire), RS422, LVDS and camera link frame grabber outputs are used and also analogue video output.
|
|
|
|
|
|
The Tocsin 102C Series CCTV Cameras provide big performance in a compact easy to install and operate package. The 102C series is ideally suited to application such as room occupancy, area/door entry and fixed equipment or area monitoring. This is particularly true where size is an issue and conventional pan-tilt-zoom units cannot be fitted. The cameras are available with a wide range of lens options and can be adjusted for different focal points and depth of view. Fully immersible versions are available to a depth of 20M.
To compliment the 102C a range of accessories is available for video capture, display and transmission. LED light modules are also available as well as glare shields, mounting brackets and junction boxes.
Features:
18-32 VDC Supply
Both PAL and NTSC Versions Available
Available for use with standard Co-Ax or twisted pair cable
Sapphire windowed for superior optical transmission and damage resistance.
All 316 stainless steel housing
Wide temperature range from -20 to +65 Degrees Centigrade
|
|
|
|
|
|
The cameras ship in robust industrial casing with a C/CS lens mount and optionally with a trigger and digital I/Os. The color, monochrome and Bayer models are available in VGA, XGA and SXGA resolutions.
The software support of the cameras leaves nothing to be desired: Both programmers and end-users immediately feel at home. Getting started with the cameras is a matter of minutes and integrating them into existing applications takes only a few lines of code. Drivers for "LabView", "Halcon", "DirectX", "Twain" and "WDM" are included. All camera parameters and settings can be set via the shipped software. Furthermore, a number of automatic modes are available, which guarantee optimal image quality in varying light conditions.
The cameras ship with drivers for Windows XP/Visa, the SDK "IC Imaging Control" and "IC Capture". The latter is a powerful end-user application, which allows all cameras parameters to be set, live video to be displayed, singular images and image sequences to be captured.
|
|
|
GigE Vision is, in theory, a highly attractive option as a bus standard for implementing machine vision systems. It offers high specifications for data rate and interconnection length, promises interoperability between vendors, and is based on a familiar, mainstream technology with all the concomitant advantages of economies of scale and ubiquity of deployment.
|
|
pco.4000
This high resolution 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 128MB/s. The system features thermo-electrical cooling (delta vs. ambient -45°C), a superior high resolution (4008 x 2672pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days. This cooled digital CCD camera system is perfectly suited for low light and high resolution camera applications, like microscopy, aerial photography or quality control.
|
|
pco.1600
This high dynamic 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (1600 x 1200pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.). This digital CCD camera system is perfectly suited for low light camera applications like fluorescence imaging and microscopy.
|
|
Digital Wavefront Cameras® deliver fast and reliable evaluation of wavefronts with ultimate performances at any wavelengths. Integrating state of the art Digital Wavefront Sensors®, these cameras measure tilts, divergence and convergence of wavefronts with an outstanding resolution only limited by CCD sensor.
Thanks to its flexibility in dynamic and resolution, Digital Wavefront Cameras® can address the most demanding applications in optics, laser beam analysis or in ophthalmology. Digital Wavefront Cameras® represent the latest advances in wavefront sensing providing unique advantages compared to conventional Shack-Hartmann sensors.
|
|
With immediate effect, the DFW-SX910 will replace the DFW-SX900 model. With his high resolution, range of features, and internal colour treatment, the DFW-SX910 camera is ideal for quality-critical colour imaging applications, in any type of fluctuating lighting conditions.
This new advanced digital camera incorporate an IEEE 1394 digital interface, is easy to install and use, and produce highly detailed, uncompressed images.
|
|
|
|
|
|
The Alta U16M uses a very large format 16-megapixel full frame sensor with microlensing and anti-blooming gates, ideal for applications requiring large field of view, such as sky surveys and radiology.
4096 x 4096 array, 9 x 9 micron pixels
5 MHz 12-bit and 1 MHz 16-bit digitization
32 Mbyte camera memory
USB 2.0 interface: no plug in cards or external controllers
Programmable, intelligent cooling to 40º C below ambient
Binning up to 8 Horizontal x 4095 Vertical
Subarray readout and fast sequencing modes
Precision time delayed integration readout
Programmable fan speed for low / zero vibration
Two serial port outputs for control of peripheral devices
General purpose programmable I/O port
External triggering and strobe controls
ActiveX drivers included with every system (other software sold separately)
Field upgradeable firmware
Self-test capability with data simulators
Fused silica windows
Runs from single 12V supply with input voltage monitor
Compact enclosure
Programmable status indicators
|
|
|
These are cameras with high resolutions suitable for high detail image observation and measurement.
|
|
|
|
|
|
pco.1300 solar
This versatile high performance 12 bit CCD camera system is specifically designed for electro luminescence (EL) applications in the range of 850nm - 1200nm. The pco.1300 oem has an extraordinary quantum efficiency of up to 11 % @ 900nm. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 solar’s most unique feature is its increased sensitivity in the NIR range of the spectrum. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 7 e¯ rms @ 10 MHz, selectable regulated cooling to 5 ºC, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as solar cell quality control, NIR fluorescence imaging, EL applications etc..
|
|
|
|
|
|
Lumenera's Lu165 CCD USB 2.0 Camera
Lumenera’s Lu165 series of megapixel cameras are designed to be used in a wide variety of applications,particularly in low-light conditions and where high dynamic range is required. Both color and monochrome, enclosed and board level product models are available.
This ultra high-performance USB 2.0 camera provides 15 fps at 1392x1040 pixels. Based on a high-quality 2/3" CCD sensor with fast global shutter - ideal for capturing objects in motion. 1.4 megapixel ExView HAD CCD provides capture in the lowest of light conditions with, 8 or 12 bit digital output. I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application.
CAMERA SENSOR
Image Sensor 2/3" format, color or mono, 10.2mm x 8.3mm array
Effective Pixels 1392 x 1040, 6.45µm square pixels
Frame Rate 15 fps at 1392x1040, 30 fps at 640x480 (binned)
Sensitivity High
Dynamic Range 72dB
Exposure Manual
White Balance Auto / Manual
Dimensions (W x H x D) 2.00 x 2.50 x 1.63 inches
Mass ~150g
Power Requirement External 6VDC, 800mA (included)
Power Consumption ~6.0 Watts
Operating Temperature 0° C to +50° C
Operating Humidity 20%-80%, Non-condensing
Interface Connector Standard USB 2.0
Lens Mount C-Mount
Frame Buffer 1 frame buffer (optional expansion to 12 frames)
|
|
Apogee Instruments Inc has been in development of a low cost, high performance follow on to the successful Alta line. This camera fills the current void of lower cost cameras with higher speed and smaller footprints.
Apogee Instruments offers a broad range of professional imaging solutions. Over the years we have built an impressive list of satisfied customers. We are confident that you will find a solution to fit your needs at a cost that won't break your budget.
Contact our Sales Department with any questions you may have about our products or would like to pre-order an Ascent system.
|
|
pco.1200 hs
This high speed 10bit CMOS camera system comprises advanced CMOS and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 1GB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs(50ns optional) to 5s. This digital CMOS camera system is perfectly suited for high speed camera applications such as material testing, external crash testing or super slow motion movie clips.
|
|
pco.inspector highspeed
This high speed 10bit CMOS camera inspection system comprises advanced CMOS and electronics technology. It is packed together with an excellent Tablet PC LM1600 into a case with batteries and tripod. Therefore, the inspection system can be used anywhere operated for more than 2 hours by its own batteries.
With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 1GB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs (50ns optional) to 5s. This digital CMOS camera system is perfectly suited for high speed inspection applications such as production line fault detection and motion analysis.
|
|
|
|
|
|
Lumenera's Lu075 High Speed Camera
This high-speed USB 2.0 camera provides 60 fps at 640x480 pixels. Based on a high-quality 1/3" CCD sensor with fast global shutter - ideal for capturing objects in motion. Low light sensitivity provides capture in even low light conditions with 8 or 12 bit digital output. I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application.
CAMERA SENSOR
Image Sensor 1/3" format, 5.8mm x 4.9mm array
Effective Pixels 640 x 480, 7.4µm square pixels
Frame Rate 60 fps at 640x480, 100+ fps 320x240 (binning)
Sensitivity High
Dynamic Range 60dB
Exposure Auto / Manual
White Balance Auto / Manual
Dimensions (W x H x D) 2.25 x 3.85 x 1.56 inches
Mass ~300g
Power Requirement USB 2.0 bus power, or external 6VDC, 500mA
Power Consumption ~2.5Watts
Operating Temperature 0° C to +50° C
Operating Humidity 0%-95%, Non-condensing
Interface Connector Standard USB 2.0 cable
Lens Mount C-Mount (CS-mount option)
Frame Buffer 1 frame buffer (optional expansion to 50 frames)
|
|
Alta Scientific Imaging Systems
Highest Speed, lowest noise, 16/12 bit dual digitization to >10MHz, TEC cooling to >55C. Lifetime warranty on CCD chamber seal. Fast USB 2.0 and 100Base-T Network Interfaces, advanced I/O control. The Alta imaging systems represent cost effective advanced imaging technology not found anywhere else.
For a full listing of Alta Series models please see:
Alta U Series USB 2.0 Cameras
Alta E Series Network Cameras
Apogee Instruments offers a broad range of professional imaging solutions. Over the years we have built an impressive list of satisfied customers. We are confident that you will find a solution to fit your needs at a cost that won't break your budget.
|
|
|
Hamamatsu has been a pioneer in the world of ultrafast science and technology, i.e. phenomena occurring faster than one billionth of a second. Streak cameras are an indispensable tool in the world of picoseconds and femtosecond phenomena, capturing information that no other instrument can provide. Hamamatsu Systems Division also offers dedicated streak camera systems for specific applications such as the C4780 - Fluorescence Lifetime Measurement System - as well as Picosecond Light Sources and Picosecond Photodetectors.
|
|
Lumenera's Lu075 High Speed USB 2.0 Industrial Camera
This high-speed USB 2.0 camera provides 60 fps at 640x480 pixels. Based on a high-quality 1/3" CCD sensor with fast global shutter - ideal for capturing objects in motion. Low light sensitivity provides capture in even low light conditions with 8 or 12 bit digital output. I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application.
|
|
|
|
|
|
See incredible resolution with this USB 2.0 camera, providing 3.5 fps at 4008x2672 pixels. Based on a high-quality 43.3mm CCD sensor with global shutter. Unique 10.7 megapixel sensor provides incredible sensitivity with large 9µm pixels and with 12 bit, >65dB dynamic range . I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application. 3 different lens mount options available: Canon-Mount, F-Mount, K-Mount
CAMERA SENSOR
Image Sensor 43.3 mm (diagonal) format, color or mono, 36.1mm x 24.0mm array
Effective Pixels 4008 x 2672, 9.0ìm square pixels
Frame Rate 3.5 fps at 4008x2672
Sensitivity Excellent
Dynamic Range >65dB
White Balance Auto / Manual
Dimensions (W x H x D) Lw11059 – 3.25 x 2.98 x 5.59 inches
Lw11058 – 3.25 x 2.98 x 5.61 inches
Lw11057 – 3.25 x 2.98 x 5.56 inches
Mass 850g
Power Requirement External 12VDC, 2A (included)
Power Consumption ~18.7 Watts
Operating Temperature 0° C to +50° C
Operating Humidity 5%-95%, Non-condensing
Interface Connector Standard USB 2.0
Lens Mount Canon-Mount, F-Mount, K-Mount
Frame Buffer 1 frame buffer (optional expansion to 6 frames)
|
|
The CoolView VHR is a high resolution CCD camera which has 4000x2672 pixels and interline transfer architecture which allows the CCD to operate without a shutter and at 100% duty cycle. The CCD has a high quantum efficiency of typically 45% @ 550nm.
The camera is deep cooled with DT of 35°C, and uses a Peltier with secondary air cooling. A water cooled version for deeper cooling is also available. The camera has a fast 10MHz readout rate with digitisation to 12 bits and also features a high dynamic range 16-bit mode. The camera features on chip binning and sub area readout.
|
|
hsfc pro
Having a single optical input, this camera system comprises a image splitter unit, four intensified CCD camera modules with fast switchable MCP image intensifiers and high resolution CCD image sensors. Each module with its 12 bit dynamic range and a high resolution CCD image sensor features an excellent signal-to-noise-ratio and the ability of single photon detection. Four high speed serial fiber optic data links connect the system to the PC. It can be triggered externally by light or electrical input.
|
|
dicam pro
This is a high performance intensified CCD camera system with gating times down to 1.5 ns. With its 12 bit dynamic range and a high resolution CCD image sensor it features an excellent signal-to-noise-ratio and the ability of single photon detection. The system is suited for applications in environments with high electromagnetic disturbances. A high speed serial fiber optic data link connects the system to the PC. The camera can be triggered by light or electrical input.
|
|
|
|
|
|
CoolView IDI:
The CoolView IDI features a 1392 x 1040 pixel CCD coupled, by the latest bonding technology, to a specially-developed high resolution image intensifier. Spectral response can be chosen for red, green or blue peak response. A gated version with 5ns gating is also available.
ISIS-4:
The ISIS-4 is an ultra-high gain intensified CCD camera with a double micro-channel plate image intensifier, allowing photon-counting efficiency and ultimate sensitivity. The image intensifier features an extremely low noise photocathode even without cooling, and the optimised electron-optical design produces detection efficiencies in excess of those achieved with standard GaAS (‘third generation’) photocathodes. CCIR or EIA readout.
ISIS-4/1000:
The ISIS-4/1000 is designed for very fast imaging applications and uses camera electronics to provide 1000 frames per second CCD. The double MCP is used to provide sufficient flux, and combined with manual gain control can be used in a variety of light levels from photon counting to fast dynamic imaging at higher light levels. The camera system can be provided with a frame grabber PC and software to provide a complete imaging solution.
ISIS-3:
The ISIS-3 is an intensified camera with the latest image intensifier technology. The use of high resolution MCPs and the technique of using a fibre optic taper to couple the intensifier to the CCD results in excellent image quality.
|
|
sensicam qe
This high performance cooled digital 12 bit CCD camera system comprises advanced CCD and electronics technology. The system features thermo-electrical cooling of the image sensor (down to – 12 °C), extremely low noise (down to 4 e- rms) and an outstanding quantum efficiency, which achieves a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 500 ns (fast shutter) to 3600 s (long exposure). A high speed serial data link connects the system to the PC (fiber optic link available). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as fluorescence imaging, confocal & light microscopy etc..
|
|
|
|
|
|
Key points
- Ultra-small
- Excellent antiblooming characteristics
- Continuous variable-speed shutter
- High sensibility and low dark current
We offer as standard 2 devices: 1/6" and 1/10":
1/6" LYNX 59.60/LYNX 59.90 (respectively offering field of vision angles of 50° and 90°)
- Interline CCD image sensor
- Image size: Diagonal 3mm (Type 1/6)
- Number of effective pixels: 752 (H) x 582 (V) approx. 440K pixels
- Total number of pixels: 795 (H) x 596 (V) approx. 470K pixels
- Chip size: 3.30mm (H) x 2.95mm (V)
- Substrate material: Silicon
- Cable: length: 4.5m - ø 3mm (ø 2.1mm without plastic sheath)
- Head: ø 5.9mm - length: 20mm
1/10" LYNX 34.90
- Interline CCD image sensor
- Image size: Diagonal 1.8mm (Type 1/10)
- Number of effective pixels: 510 (H) x 492 (V) approx. 290K pixels
- Total number of pixels: 537 (H) x 505 (V) approx. 320K pixels
- Chip size: 2.00mm (H) x 2.00mm (V)
- Unit cell size: 2.90µm (H) x 2.25µm (V)
- Substrate material: Silicon
- Cable: length: 4.5m - ø 3mm (ø 2.1mm without plastic sheath)
- Head: ø 3.4mm - length: 16.5mm
|
|
The Pix-Cell Camera is a high performance, programmable Cellular Single Board Controller, that offers built-in digital and analog I/O combined with GSM/GPRS connectivity in a compact form factor. With this GSM camera it is possible to take a picture and send it all over the world.
Features:
- Small Size: 95x60x15mm.
- JPEG resolution 640x480, 320x240.
- Remote camera activation through SMS or short call.
- Microchip PIC18F6722 controller at 32MHz.
- 128KB Flash for user memory application.
- 32kB of EEPROM Memory.
- 3 Protected Digital Inputs.
- 3 10-bit Analog Inputs.
- RS232 serial communication.
|
|
pixelfly vga
This high performance digital 12 bit CCD camera system features state of the art in CCD and electronics technology. The system consists of an ultra compact camera head, which either connects to a standard PCI or a compact PCI board via a high speed serial data link. The available exposure times range from 10 µs to 10 s. A digital temperature compensation is integrated instead of a space consuming thermo-electrical cooling unit. All camera functions can be remotely accessed and controlled via digital interface. This compact digital CCD camera system is perfectly suited for many scientific and industrial imaging applications, like microscopy, spectroscopy and quality control.
|
|
|
|
|
|
Lumenera's Mini Lm165 Industrial USB 2.0 Camera
Measuring 44x44x56mm, these compact cameras offer the same performance as our enhanced USB 2.0 camera line, delivering outstanding image quality and value. Features include new locking industrial mini USB and RJ45 GPI/O connector, multiple mounting points, 60 fps at full 640x480 resolution, 100+ fps at 320x240 binning mode, and on-board processing and sensitivity provide outstanding image quality. Both color and monochrome product models are fully supported by the Lumenera Software Developer’s Kit with an application programming interface compatible with C++ and Visual Basic.
CAMERA SENSOR
Image Sensor 2/3” format, color or mono, 9.0mm x 6.7mm array
Effective Pixels 1392 x 1040, 6.45µm square pixels
Frame Rate 15 fps at 1392 x 1040, 30 fps at 640x480 (binned or ROI)
Sensitivity Extremely High
Dynamic Range 66dB
Exposure Manual
White Balance Auto / Manual
Dimensions (W x H x D) 44x44x56mm
Mass TBD
Power Requirement USB bus power or external 5VDC, 500mA
Power Consumption ~2.5 Watts
Operating Temperature 0°C to +50°C
Operating Humidity 5%-95%, Non-condensing
Interface Connector Locking mini USB cable & RJ45 GPI/O connector
Lens Mount Adjustable C-Mount (CS-Mount option)
Frame Buffer 1 frame buffer (optional expansion to 50 frames
|
|
|
|
|
|
Lumenera's Lw230 High-Speed USB 2.0 Camera
This high-speed USB 2.0 camera provides 12 fps at 1616x1216 pixels. Based on a high-quality 1/1.8" CCD sensor with global shutter. Unique 2.0 megapixel image sensor provides higher dynamic range of 60dB during video capture. I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application.
CAMERA SENSOR
Image Sensor 1/1.8" format, color or mono, 7.1mm x 5.4mm array
Effective Pixels 1616 x 1216, 4.40μm square pixels
Frame Rate 12 fps at 1616x1216
Sensitivity High
Dynamic Range 60dB
White Balance Auto / Manual
Dimensions (W x H x D) 2.00 x 2.50 x 1.63 inches
Mass ~150g / 300g
Power Requirement External 5VDC, 800mA (included)
Power Consumption ~4.0Watts
Operating Temperature 0° C to +50° C
Operating Humidity 5%-95%, Non-condensing
Interface Connector Standard USB 2.0
Lens Mount C-Mount (CS-Mount option)
Frame Buffer 1 frame buffer (optional expansion to 6 frames)
|
|
|
|
