|
|
| Thermal Imaging Cameras become more and more important in fire applications. Convince yourself of our innovative product range! |
|
This full featured, high performance thermal imaging camera has a temperature measurement range from -20 to 1500°C/-4 to 2732°F and a high quality aspherical lens with motorised focus and digital zoom.
Thermal images are displayed in the viewfinder and bright LCD display. They can be displayed and captured for later use in reports.
Images and sound files are saved on to a Compact Flash memory card for download and further analysis.
The right camera for predictive maintenance and production processes. Detect the symptom before the problem occurs. High resolution image quality helps you quickly find the problem.
The Cyclops TI 814 thermal imaging camera is complemented by the Land Image Processing Software - LIPS, which provides thermal and visual image manipulation and storage together with report writing facilities.
LIPS is easy to use, highly flexible, and greatly enhances the versatility of the Cyclops TI 814.
The Cyclops TI 814 imaging camera is used in plant condition monitoring, structural integrity inspection, quality control, and research and development in industries such as: Power generation, transmission and distribution; Electrical and electronics; Energy management and thermal surveys; Steel and glass; Petrochemical and plastics; Construction and civil engineering. |
|
| Please note, that in Great Britain the infrared cameras are available via the company FLIR Systems, only. |
|
The Scott Eagle X is a user-friendly compact, durable and lightweight thermal imaging camera.
Its fast-attack technology for easy interpretation of images has proved invaluable in a wide variety of firefighting, police, and security applications.
Inspired by end-user safety professionals requiring heat source identification, the Eagle X design utilises the same proven technology as the Scott Eagle Imager 160 and offers all the must-have features in a thermal imaging camera - without numerous high-end options.
Simple to operate, reliable and cost-effective, the Eagle X combines clear and crisp thermal imaging technology in a compact, reliable and affordable camera.
|
|
The IRI 4010 is an innovative thermal imager product, which offers outstanding imaging and temperature measurement performance together with the traditional IRISYS features of flexibility, ease of use, and minimal cost of ownership.
IRISYS has produced an imager that is ideal for thermographer and maintenance engineer alike; high quality images may be captured and manipulated offline or problems can be resolved on the spot. The camera comes with an industry leading 3 ½" display and delivers price and performance that is unique to IRISYS.
Typical applications for the IRI 4010 include:
· Predictive and Preventative Maintenance
- electrical and mechanical
· Process Monitoring
· HVAC & R Troubleshooting and Maintenance
· General Industrial/Domestic Inspection
· Security |
|
The narrow angle 9.1° x 6.8° lens enables detection and temperature measurement of small objects over long distances. The IRI 4040 is especially suitable for use in the power utilities industries for the inspection of substation and overhead distribution and transmission lines.
IRISYS has produced an imager that is ideal for the thermographer and maintenance engineer alike; high quality images may be captured and manipulated offline or problems can be resolved on the spot. The camera comes with an industry leading 3 ½" display and delivers price and performance that are unique to IRISYS.
The IRI 4040 is an innovative thermal imager product, which offers outstanding imaging and temperature measurement performance together with the traditional IRISYS features of flexibility, ease of use, and minimal cost of ownership. |
|
| The Titanium VLWIR incorporates a high QE 320x256 element MCT infrared focal plane array with spectral response from 7.8 to 11.5 microns. Titanium VLWIR features variable “snap shot” integration from 10µs to 10 ms and frame rates up to 200 FPS (frames per second) in full frame mode and 6000 FPS in sub-windowing mode. Additionally Titanium LWIR features 14-bit digital output and an optional filter wheel. A wide selection of lenses and filters are available to meet your specific application requirements. Titanium’s RS-422 digital interface is designed to work with Altair, a powerful image capture thermal analysis system. |
|
Features :
- High resolution 640 x 480-pixel detector
Image resolution is four times higher than 320 x 240 detector.
Users can achieve quick measurement of wider area with high resolution.
- Basic performance
Resolution: 0.06°C or better at 30°C (30Hz)
Accuracy: ±2%(of reading) or ±2°C
Environmental protection: IP54
I.F.O.V.: 0.6mrad
- Wide 5.6-inch LCD & color viewfinder
Wide 5.6" LCD & viewfinder for clearly visible image at both indoor and outdoor.
- Visual/thermal image fusion function
Measures visual and thermal images simultaneously and displays the fusion image for easy identification of thermal spots
- Easy operation
Large control buttons
Multilingual menu: English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Simplified Chinese and Traditional Chinese
Light weight: Approx. 1.7kg (including battery)
- Visual camera & target illuminator
High quality visual camera at 1.3 Mega pixels.
Simultaneous recording of thermal & visual images.
Easy identification of location and data management.
Target illuminator provides light for visible camera where condition is dark.
- Laser pointer
For easy determination of measuring spot.
Voice recording
Voice recording available up to 30 seconds per image. |
|
Infra-red camera Fluke Shooting Optimized for various applications like the real diagnosis
The infra-red cameras Fluke TiR are adapted perfectly to various applications (envelope of the building, restoration and cleansing, inspection of roofs).
Technology Ir-Fusion® Profit from a double glance:
at the same time in the infra-red and the visible one. The fusion of the thermograms and the visual images gives you access more quickly and easily to crucial information. The traditional infra-red is not enough any more. Ir-fusion is a technology in authority of patent based on the simultaneous seizure of a digital photograph and a thermogram. The fusion of both simplifies the analysis of the infra-red images. Ir-fusion is provided in series on the TiR models. |
|
| The Titanium series is specifically designed for academic and industrial R&D applications as well as integrators who need to have a very flexible camera,with the highest sensitivity,accuracy,spatial resolution and speed at an affordable cost. The Titanium series are integrated system, which complement Silver series dedicated for industrial quantitative thermography and stress analysis. |
|
Iron and Steel Slag Detection System
The definitive infrared thermal imaging system for steel slag monitoring
When liquid steel is tapped from a basic oxygen or electric arc furnace, it is advantageous to minimise the quantity of slag carried over into the ladle.
Previously this has been done by visual observation of the tapping stream or by the use of electromagnetic induction coils mounted onto the furnace. However, neither of these methods has proved to be entirely reliable.
The LAND thermal imaging Slag Detection System SDS has been developed using LAND’s expert knowledge of the application and over 60 years of experience in the steel industry to monitor and aid control of slag carry-over from one process to another.
|
|
Multi purpose high sensitivity IR camera for industry, research and medical applications. Plug & play interfaces.
The Silver 420M is a 3-5µm focal plane array camera dedicated for Research & Development applications. The Silver 420M uses a high sensitivity InSb focal plane array and provides IR images up to 170Hz. Silver 420M is particularly appropriate for advanced users willing to get immediate access to high performance IR imagery.
The Silver 450M is a 3-5µm focal plane array camera combining very fast frame rate and high sensitivity, dedicated for Research & Development applications.
The SILVER 480M is the most advanced IR cooled camera featuring ultra fast temporal analysis, simultaneously with analogue signal recording. The Silver 480M is specifically designed for all researchers,who want to perform ultra fast thermographic analysis, while simultaneously acquiring external excitation signal with the highest sensitivity, accuracy and spectral discrimination. The Silver 480M is a 3-5µm focal plane array camera combining very fast frame rate and high sensitivity, dedicated for Research & Development applications.
The SILVER 660M is specifically designed for the most demanding users of IR technology, who want to perform thermal imagery at high spatial resolution with the highest sensitivity and accuracy at an affordable cost. |
|
| Titanium Orion is a multispectral imaging camera for R&D and signature analysis applications. The Orion system is an infrared multispectral imager capable of producing IR sub-band images at video rate within the SW-MWIR or LWIR region. This high performance system uses the latest state-of-the-art focal plane array (FPA) detector technology along with real-time, large dynamic range electronic modules. |
|
| Air purifying respirators use cartridges or canisters constructed of carbon or paper-based filters to remove contaminants or particles from non-IDLH (Immediately Dangerous to Life and Health) environments. Air purifying respirators that rely on the user's inhalation to draw the ambient air over the filters are called negative pressure air purifying respirators. Those that utilize blower to pull the ambient air through the filters and then push it to the user are called positive pressure air purifying respirators. Air-purifying respirators have numerous applications from construction and automotive repair to pharmaceutical and oil production. |
|
Teledyne Imaging Sensors delivers standard and custom imaging subsystems. This includes packaged focal plane arrays incorporating optics, coolers, or board electronics - to satisfy customer specified requirements such as mechanical, optical, thermal, and electrical interface.
In a soon to be offered product, Teledyne Imaging Sensors developed an FPA support Application Specific Integrated Circuit (ASIC), which provides clock and bias generation for FPA operation, and image processing - gain and offset correction and analog-to-digital conversion. This ASIC can replace multiple boards of support electronics, leading to compact imaging subsystems. |
|
FLIR Systems, the world leader of infra-red thermography, supplements its range of camera with ThermaCAM E320. It is about an infra-red camera of a precision and an unequalled quality of image: its thermal sensitivity reached 0,08°C and it is equipped with a detector 320 X 240 pixels.
Compact (272 mm X 80 mm X 105 mm), resistant to dust and with projections of water (IP54), ThermaCAM E320 can work in the industrial environments most difficult in interior as in outside. With a weight lower than 800 G, ThermaCAM E320 is one of the portable infra-red cameras lightest in the world.
FEATURES:
Zoom: 1 X, 2 X or 4 X
Tools for analysis: -20°C with +500°C (in 2 ranges) and of +250°C with +1200°C in option (with filter High Temperature, on objective 25° only)
Uncertainty of measurement on black body: ±2°C or ±2% of the reading
Repeatability of measurement: ±1°C, ±1%
Laser diode type AlGaInP semiconductor: red 1mW/635 Nm
Weight: < 800 G with battery and objective 25°
Dimensions: 272 mm X 80 mm X 105 mm
Interfaces: USB, RS-232 (option), Standard Video out composite RCA video, Video out STAKE, composite video by connector, standard RCA.
Screen: LCD integrated 2,5", 16.000 colors
|
|
ThermaCAM GasFindIR: infra-red camera for the detection of the gas leaks.
A new infra-red camera revolutionizes the detection of the gas leaks. Our GasFindIR solution detects quickly and easily the weakest gas emissions.
GasFindIR allows you:
- To inspect thousands of components in only one passage
- To locate small escapes several away meters
- To supervise the great escapes in full safety, remotely
- To detect the escapes of the tankers
|
|
The news ThermaCAM Série T of FLIR Systems is different from all that you already saw in the world of the infra-red. Super compact and ultra light! It communicates with its software in an exceptional way. With its single characteristics such as a touchscreen, comments texts and sketch, a tilting objective and functions of alarms specific to your various applications, it becomes incredibly simple of use. We also have includes many other functions like a numerical camera, or a tool for fusion of visible and infra-red images (Thermal Fusion)
It goes without saying that the quality of image is fantastic. But after all, it is a new generation of infra-red cameras FLIR Systems. |
|
ThermaCAM P65
The solution EXPERT for maintenance
- Extremely high thermal Sensitivity (0,08°C)
- Thermal Images of unequalled quality (320x240 pixels)
- Posting of infra-red and visible images
- Autofocus
- Comments text and vocal
- Technology bluetooth
- Usable whatever the atmospheric conditions (IP54)
- Recording of radiometric images JPEG
- Broad range of accessories and objectives
- Compatible with the ThermaCAM software To defer
|
|
ThermaCAM P640
307.200 Pixels for a better expertise
ThermaCAM P640
ThermaCAM P640 is the 1st infra-red camera in the world having a matrix of 640x480 elements. The resolution of a detector of 640x480 elements is four times higher than that of a detector of 320x240 elements. Consequently, you will be able to detect more defects. Moreover with its integrated numerical camera, ThermaCAM P640 produces visible images of a resolution of 1.3 million pixels.
Characteristics of ThermaCAM P640:
- 307.200 pixels
- Matrix of 640x480 elements
- 0.06°C with 30°C
- Tilting Big screen LCD of 5.6 "
- Tilting Sight of high-resolution
- Integrated numerical Camera of 1.3 million pixels
- Numerical Zoom 8X
- Recording of video sequences
- IP54
- Resistance to 25G with the shocks and 2G with the vibrations
-...
|
|
ThermoVision A20 is a new camera of Infra-red Thermography dedicated to many applications of process or laboratory. With the Version A20-M, which allows the temperature measurement, it is easily integrated in your continuous processes in order to ensure the regulation via its numerical and analogical Inputs/outputs of it.
In version A20-M Researcher, it conviend perfectly with the applications of laboratory, Research & Development, quality assurance and development of product... for the dynamic recording of sequences via the FireWire connection and the analysis of these images.
Lastly, the version A20-V, vision only, is particularly useful in monitoring and safety of the people or the places. |
|
Detect your thermal defects with this tool for control
InfraCAM is an easy of employment and very economic infra-red camera. It reveals clearly the masked minor problems, undetectable with the naked eye but which can have serious consequences.
Robust and very easy to use, InfraCAM is the ideal tool for many applications. Thanks to its price (5750), it puts the advantages of thermography at the range of users much more.
New: Model InfraCAM SD:
- More images (storage capacity of 1000 images on a chart SD)
- More thermal sensitivity
- More functionalities
- New QuickReport software |
|
• Temperature range: 20 to 1200°C (several models)
• Real-time thermal imaging, scan speed up to 48Hz
• 256 measurement points per line
• Wide choice of spectral and temperature ranges
• High-quality brushless motor (MTBF 40000 h)
• Three user-configurable 4-20 mA outputs
• RS485/RS232 digital communications (up to 1000 m)
• PC independent alarm output
• Rugged, waterproof IP65 enclosure
• Air purge keeps window free of dirt and condensation
• Water cooling for ambient temperatures up to 180°C
|
|
SKF Advanced thermal imager TMTI 2
Comprehensive high resolution thermal imaging package
The advanced thermal imager TMTI 2 is a user-friendly thermal imager, producing high quality images from invisible infrared radiation. The high resolution (160x120 /19 200 pixels) images are displayed on a large backlit 3½” screen, for ease of viewing. Powerful PC and report-writing software is supplied as standard, which help enable the user to perform comprehensive data analysis and enhancement of the images.
Advanced temperature measurement features are built-in to the TMTI 2 such as, automatic hot spot and cold spot finder, Maximum/Minimum temperature view of an area and temperature difference display of two user defined spots.
-Compact ergonomic design and light weight
-Non-contact measurement technique enabling measurements to be made safely on running equipment
-Wide temperature measurement range from –10 °C to 250 °C
-User selectable emissivity correction from 0,2 to 1,0 with reflective ambient temperature correction
-Laser pointer pinpoints the area of interest
-4 different selectable colour pallets
-20° x 15° field of view easily enables the application to be seen
-Large thermal image storage capacity, up to 1 000 images on SD card provided
|
|
The IRI 4030 is an innovative thermal imager product, which offers outstanding imaging and temperature measurement performance together with the traditional Irisys features of flexibility, ease of use, and minimal cost of ownership.
Irisys has produced an imager that is ideal for the thermographer and maintenance engineer alike; high quality images may be captured and manipulated offline or problems can be resolved on the spot. The camera comes with an industry leading 31/2" display and delivers price and performance that are unique to Irisys.
The IRI 4030 is especially suitable for use where high temperature measurement is required, such as in the petro-chemical, glass, cement, metal and refractory industries. |
|
COOLSCAN 20 is a unique 2-dimension scan thermal imager with exceptionally large field of view (70°x180°).
The extended temperature measurement range (200°C to 1600°C) makes it suitable for various industries such as cement where it is used for controlling air flows of grate clinker coolers.
|
|
|
|
