|
|
| Raytek announces the launch of its new GS110 Infrared Thermal Imaging System for Low Emissivity (Low-E) Glass. This system is specifically designed to monitor one-side coated flat glass during the tempering process. The GS110 scanns the topside of the glass and measures simultaneously the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher. The measured data are transferred to the Windows-based GS110 software which is included in the GS110 system. The software automatically corrects the thermal image of the topside of the glass to provide a more accurate result. Further, the GS110 allows the user to set-up predefined recipes to accommodate frequent product changes typical in glass processes. OPC server functionality is included as an integral part of the proprietary software allowing for seamless integration of the data into other process control software packages. By quickly detecting thermal irregularities within the glass and identifying defective heating elements, the GS110 allows glass processors to improve product quality and uniformity, and to reduce scrap. The GS110 can be used for non-contact infrared temperature measurement in other secondary glass-processing applications such as bending, forming, and annealing. |
|
| Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement. |
|
Iron and Steel Slag Detection System
The definitive infrared thermal imaging system for steel slag monitoring
When liquid steel is tapped from a basic oxygen or electric arc furnace, it is advantageous to minimise the quantity of slag carried over into the ladle.
Previously this has been done by visual observation of the tapping stream or by the use of electromagnetic induction coils mounted onto the furnace. However, neither of these methods has proved to be entirely reliable.
The LAND thermal imaging Slag Detection System SDS has been developed using LAND’s expert knowledge of the application and over 60 years of experience in the steel industry to monitor and aid control of slag carry-over from one process to another.
|
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
EPSIMETAL, SCAIME’s miniature strain sensor is available either with a high level output signal or with a direct strain gage output. Thanks to a patented mechanical device, installation and removing are made very easy, by means of screws or gluing, and the strain measurement is possible, from very low stresses up to 1000µm/m.
The amplified output version allows, by means of digital adjustment:
- Temperature compensation.
- Adjustable measurement range.
A watertight version is also available.
This is a perfect tool for load and force measurement or monitoring on existing structures and machines.
EPSIMETAL, used with EPSITRAC, offers a specially designed solution for the monitoring of molding machines and presses. It allows the measurement of tie bar stresses on die casting or plastic molding machines, or hydraulic presses. Periodic adjustment, as well as monitoring, is possible, with transportable or permanent installation. |
|
| SPC-LightTM has been designed to collect and analyse data easily so that you can take control of your processes. It allows you to monitor performance and achieve sustainable improvements in quality and profitability. It has been implemented in a wide variety of manufacturing industries, from automotive to electronic; from steel to glass. |
|
Recorders, Paperless
Paperless recorders offer improvements over traditional chart recorders, including reduced operating costs and improved reliability. Paperless recorders can be connected to the LAN allowing access to data by multiple departments.
eZtrend QXe
The eZtrend QXe is a cost-effective, general purpose DIN size electronic data recorder that easily replaces 100mm paper strip chart recorders, providing the ability to capture continuous and batch data electronically.
Minitrend QX
The Minitrend QX Electronic Data Recorder represents the latest in recording technology by providing the ability to capture continuous and batch data electronically, making the analysis of the data easier, faster and more reliable.
MultitrendPlus SX
The Multitrend SX reliably records electronic data in a secure format from directly connected sensors or transmitters that can be used for documentation of process conditions and process improvement.
TrendManager Software
TrendManager Pro Software Suite is a PC software package designed to complement Honeywell paperless recorders.
|
|
Recorders, Paperless
Paperless recorders offer improvements over traditional chart recorders, including reduced operating costs and improved reliability. Paperless recorders can be connected to the LAN allowing access to data by multiple departments.
eZtrend QXe
The eZtrend QXe is a cost-effective, general purpose DIN size electronic data recorder that easily replaces 100mm paper strip chart recorders, providing the ability to capture continuous and batch data electronically.
Minitrend QX
The Minitrend QX Electronic Data Recorder represents the latest in recording technology by providing the ability to capture continuous and batch data electronically, making the analysis of the data easier, faster and more reliable.
MultitrendPlus SX
The Multitrend SX reliably records electronic data in a secure format from directly connected sensors or transmitters that can be used for documentation of process conditions and process improvement.
TrendManager Software
TrendManager Pro Software Suite is a PC software package designed to complement Honeywell paperless recorders.
|
|
| The SPECTRO PHOENIX II is a polarized ED-XRF benchtop analyzer that offers extreme simplicity of operation in a low-cost compact design. It is ideal for elemental analysis of liquids, solids, pastes, slurries and powders for measuring Mg through U qualitatively and quantitatively. |
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
| For the monitoring and control of complex processes, Elabo offers its System Service for process control centres - for customers in industry, the power supply segment, traffic management, EDP and computing centres, property management and safety engineering to name but a few. The process control centres program Elabo TaCom, defined by high flexibility and ergonomic quality, is the heart of the System Service. In addition, Elabo also collaborates in the design and equipment of control centres with comprehensive consulting services. |
|
26-1700 Series: Versatile
Extremely sensitive
Ideal for both gas & liquid service
High temperature versions available
Accuracy: ±1% of relief pressure range
26-2300 Series: High Accuracy
Precise pressure control
Diaphragm sensed - highly sensitive
Crack to reseat: 2% of set pressure
Bubble-tight shutoff at all reseating pressures
26-2500 Series: High Flow
Large diaphragm for excellent sensitivity
Bubble-tight shutoff at all reseating pressures
1/2", 3/4" and 1" NPT inlet and outlet port sizes
26-2900 Series: Tracking
High Flow
Negative spring bias
Designed for BIBS application
Diaphragm sensed - highly sensitive
44-2300 Series: Economical
Hand adjustable
Diaphragm sensed
Dome loaded
Four relief pressure ranges
44-4700 Series: Sub-atmospheric
Metal to metal diaphragm assures minimum inboard/outboard leakage
Controls sub-atmospheric to positive pressures
High flow capacity
Negative spring bias |
|
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-2800 Series: Accurate/Positive Seal-Reducing
Mechanical link between diaphragm & main valve prevents pressure creep
Positionable captured vent bonnet
44-3400 Series: Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available |
|
26-1100 Series: High Flow Cv=1.3 or .46 - Reducing
Diaphragm sensed - highly sensitive
Modular construction - easy service
External sensing available for improved accuracy
Balanced main valve increases seat life
26-1200 Series: High Flow Cv=3.3 - Reducing
Similar to 26-1100 with higher flow capacity
44-4200 Series: Economical
Dome loaded
Piston sensed - highly reliable
Compatible with TESCOM electronic pressure controllers |
|
20-1000 Series: Compressed Natural Gas
Balanced main valve minimizes inlet pressure fluctuations
Piston sensed – highly reliable
Water heat jacket standard
20-1200 Series: High Pressure Hydrogen
Nickel-plated aluminum
Large piston sensor
All regulators tamper-proof
20-1400 Series: High Flow / Low Pressure
Diaphragm sensed – highly sensitive
Dome load spring bias ± 2 PSIG
Captured bonnet design for safety
44-6000 Series: In-Line High Pressure
Balanced main valve design
Positive shutoff seal
Captured bonnet available
Patent pending
44-7400 Series: Pressure Reducing
Ideal for CNG dispensing applications
Several porting configurations available
Spring adjust, high outlet, high flow |
|
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-3200 Series: High Flow/Purge
Ideal purge regulator
High pressure inlet version incorporates a balanced main valve to minimize inlet pressure fluctuation
26-1500 Series: Sensitive/Non Venting-Reducing
Compact design
Elastomeric diaphragm - highly sensitive
Dome loading available
For liquid or gas service
26-1600 Series: Sensitive/Self Venting-Reducing
Elastomeric diaphragm - highly sensitive
Controls up to 500 PSIG
Dome loading available
For liquid or gas service
Works with TESCOM motorized actuator for remote control
DH Series: Low Pressure
Diaphragm sensed - highly sensitive
Excellent repeatability
Very high flows at low pressures |
|
54-2100 Series: High Pressure-Back Pressure
Accuracy: ±1% of pressure range
Hardened metal to metal seats for heavy duty service
Eight pressure ranges up to 15,000 PSIG
54-2300 Series: High Flow/High Pressure-Back Pressure
Control pressures to 10,000 PSIG
Flow capacity: Cv = 1.6
Excellent crack to reseat ratio
Hardened metal to metal seats for heavy duty service
54-2700 Series: High Flow/Back Pressure
Flow capacity: Cv = 5.0
Choice of dome loaded, spring loaded, or air ratio device |
|
54-2000 Series: Low Flow/High Pressure-Reducing
Rugged design, high pressure service
Hardened metal to metal seats for heavy duty service
System pressures to 20,000 PSIG
Captured venting standard
54-2200 Series: Medium Flow/High Pressure-Reducing
High flow capacity: Cv = 2.0
Hardened metal to metal seats for heavy duty service
Self-venting is standard
54-2800 Series: High Flow/High Pressure-Reducing
Flow capacity: Cv = 8.0
Inlet & outlet pressures up to 5,000 PSIG
Choice of air ratio or dome loading
Hardened metal to metal seats for heavy duty service
26-2000 Series: High Pressure Reducing
Designed for both hydraulic and pneumatic service
Captured vent standard
Designed for heavy duty shock and vibration service
Choice of metal to metal or soft seat
Compatible with TESCOM Electronic Controllers |
|
12 Series: Miniature Pressure Reducing Regulator
Product of choice for state of the art OEM gas systems. 10 Ra or 5 Ra microinch surface finish. Available in VCR, tube stubs or surface mount, "C" or "W" seal. |
|
64-2600 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available in two inlet pressure versions, 600 psi and 3,500 psi. For low flow applications. With several outlet pressure ranges up to 500 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
74-3000 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available with inlet pressures up to 3,000 psi. For high flow applications. With several outlet pressure ranges up to 150 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
44-1100 Series: High Pressure-Reducing
Excellent sensitivity
Piston sensed for high cycle life
Inlet & outlet gauge ports standard
40 micron (nominal) inlet filter
Removable valve module for easy field repair
Self-venting standard
44-1300 Series: High Flow/High Pressure-Reducing
Excellent sensitivity
Self-venting
Extremely reliable
Spring, dome or air ratio loading
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-3400 Series: General Purpose/Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available
26-1000 Series: High Pressure-Reducing
Outlet pressure ranges are field changeable
Numerous porting options
Optional inlet pressures to 20,000 PSIG
Large handknob provides fast low-torque pressure settings
Self-venting standard
26-2000 Series: High Pressure-Reducing
Designed for both hydraulic and pneumatic service
Captured vent standard
Designed for heavy duty shock and vibration service
Choice of metal to metal or soft seat
Compatible with TESCOM Electronic Controllers |
|
PH1600 Series: Low Pressure, High Flow
FDA Title 21 & USP Class VI Materials
Flows to 250 SCFM N2
Gas and clean steam versions
Ports from 1/2" - 1 1/2" tube ends, sanitary
PH1800 Series: Low Pressure, Very High Flow
FDA Title 21 & USP Class VI Materials
Flows to 1400 SCFM N2
Gas and clean steam versions
Ports from 3/4" - 1 1/2" tube ends, sanitary
PH-2200 Series: Compact, Low Pressure, Low Flow
FDA Title 21 & USP Class VI Materials
Flows to 5 SCFM for specialty gas & clean air applications
Ports from 3/8" - 1/2" tube ends, sanitary
PH-2600 Series: Compact, Low Pressure, Low Flow
FDA Title 21 & USP Class VI Materials
Flows to 10 SCFM for specialty gas & clean air applications
Ports from 3/8" - 1/2" tube ends, sanitary
PH-3200 Series: Compact, Low Pressure, Medium Flow
FDA Title 21 & USP Class VI Material
Gas and clean steam versions
Tracking version for agitator seals
Gas flows to 50 SCFM N2 |
|
SJS Series: Tracking/Pump Applications
Maintains accurate differential pressure when incorporated into a double seal system
Tracks upsets in system pressure and decreases downtime by increasing seal life
42 MW: Welded Diaphragm Instrument Isolator
Isolated and protects the regulator from corrosive process media
Intended for use with our wide range of tracking regulators
Assists in the control of pressure in fugitive emission and/or mechanical seals applications
44-4000 Series: High Flow Cv=2.0 or .7/Positive Bias-Reducing
Captured self-venting standard
Adjustable bias pressures
Compatible with TESCOM electronic pressure controllers
26-2900 Series: Negative Bias-Back Pressure
High Flow
Negative spring bias
Designed for BIBS application
Diaphragm sensed - highly sensitive |
|
High tech and sturdy air operated valve, with a floating
plug seal, meeting stringent use criteria.
An extra thick body of the actuator and of the valve, ensuring a good resistance to mechanical and thermal distorsions.
A modular design enabling the following configurations:
Shut off valve DCX3 L
DCX3 T
DCX3 X
Divert valve DCX4 L/L
DCX4 T/L
DCX4 L/T
DCX4 L/X
PFA seals quality ensures a complete sealing at high temperature and a good resistance to aggressive products.
Plastomer seal can be replaced by elastomer seal
Single or double acting connection
With plastomer seal, vertical setting up (especially for DCX4)
Dimensions 1” - 1-1/2” - 2” - 2-1/2” - 3” - 4” - 5” - 6” Material
Body: 316L stainless steel
Shut-off unit: 316L stainless steel
Manual or automatic operating devices: 304 stainless steel
Plug seal: PFA and elastomer
Stem seal: viton, EPDM, silicone
Options
• Signal back equipment on the top of the actuator
• Sterilization of the stem through an upper guide bearing
• External = 47 RA max (150 grit)
• Internal = 32 RA max (180 grit)
Upgraded finishes upon request:
Surface Finish
Variants
Plug and body machined for a metal to metal sealing (without seal)
Elastomer sealing (specific plug with viton, EPDM o-ring)
Manual operator device (instead of the actuator
Tank bottom type
Long stroke valve available upon request |
|
|
