Injection molding machines

55 companies | 429 products
Injection molding machines
  • What’s new?
    Submit
  • Closure
    Submit
  • Operation
    Submit
  • Technology
    Submit
  • Treated materials
    Submit
  • Applications
    Submit
  • Clamping force
    • min.
      max.
    Submit
  • Screw diameter
    • min.
      max.
    Submit

The injection moulding machines of the "srm" line are designed for the processing of virgin material, agglomerate and regrind and thanks to special nozzle locks also allow the processing of plastic that is heavily contaminated or contains expanding agent.


The range of materials spans from soft PVC and polyolefins, PS,...

Clamping force 3.000 kN
Shot volume 36.000 cm3

The depicted injection moulding machine with rotation table...

Clamping force 25,000 kN
Shot volume 50,000 cm3
In addition to the advantages of low pressure injection moulding machines, which have already been stated, machines with...

{{productDetail[75844]}}

Hydraulic clamping makes high-quality production

1. The clamp distributes the pressure evenly. used for long-

term,...

Hydraulic clamping makes high-quality production

1. The clamp distributes the pressure evenly. used for long-

term,...

Hydraulic clamping makes high-quality production

1. The clamp distributes the pressure evenly. used for long-

term,...

Hydraulic clamping makes high-quality production

1. The clamp distributes the pressure evenly. used for long-

term,...

Hydraulic clamping makes high-quality production

1. The clamp distributes the pressure evenly. used for long-

term,...

{{productDetail[53220]}}

The Si-50-6 model is capable of bringing new dimensions to the user's shop floor. It is designed having a v-shaped die clamping structure, which allows the high-speed ejector perform high-cycle operations....

The Si-80-6 is manufactured by R.P. INJECTION S.R.L. It is a horizontal injection molding machine, that is suitable for shop floor. Features of this unit include a V-shaped die clamping unit to ensure high...

The Si-100-6 model capable of bringing new dimensions to the user's shop floor. It is designed having a v-shaped die clamping structure, which allows the high-speed ejector perform high-cycle operations....


The Si-130-6 model has the V-shaped die clamping unit. It includes a high-speed ejector to realize high-cycle operations. The best feature is the extremely sharp acceleration and deceleration of the injection unit. Its constructed to increase horizontal...

The Si-180-6 model, manufactured by TOYO Europe, is an electrical horizontal injection molding machine. This machine features a 'V'-shaped die clamping unit that enables high-speed ejector realize high-cycle operations. In addition, its injection unit...

{{productDetail[78016]}}

This unit has been manufactured with a modular design to provide operators with a customized, economic,...

This hydraulic horizontal injection molding machine is developed by BOCO PARDUBICE machines,...

Boco's Clamping Force Machines are part of the company's JSW series of injection molding machines.

These...

The JSW is a range of injection molding units. These units are designed with vertical of 400 up to 2,200 Kn.

They have a modular structure...

{{productDetail[74996]}}

The NRH series is an optimum clamping unit mechanism, developed by 3D motion & CAE techniques. The line is provided with minimized machine...

The Two Platen Machine is being utilized in a 3D optimized computation for the clamping mechanism. It is also suitable for conducting...

The NRH-D series is a line of two-platen machines that is manufactured by Nanrong. The series features a 3D dynamic computation, for the...

Two-Platen Machine NRH-LD series is a line of clamping units designed for 3D motion. This tool is capable...

The NRT series is a horizontal injection molding machine that is specially manufactured for plastication and...

{{productDetail[74350]}}

Enaiviv EN Series Injection Machines is the best choice to reach your High Precision...

Enaiviv EN Series Injection Machines is the best choice to reach your High Precision...

CLAMPING UNITS :
1. Heavy-duty double toggles wllh bushings
2. Automatic oil lubrication and alarm system
3. Mould height adjustment with...

The injection molding machine with energy saving 78% {depends on product style...

• T-Slot Platen
- 200 Sets or Unlimited Mold Memory
- Japan Made Pressure & Flow Proportional Valve
•...

{{productDetail[125977]}}

Equipped with the "X-Pump," an innovative hybrid pump system, the FNX-Ⅲ Series has...

FVX Series is inheriting the outstanding hydraulic machine traditions of easy operability and direct pressure clamping advantages, but yet it achieves significant...

The PNX-Ⅲ Series has been developed by fusing the merits of hydraulic molding machines (durability of direct-pressure...

NISSEI electric injection molding machines have been developed by being in tune with the needs in the field and years of accumulated expertise. Since its debut in...

The key characteristic of "TNX Series" is its hybrid...

{{productDetail[20434]}}

The introduction of multi-material and multi-colour moulding techniques over the last few years has effectively revolutionised the entire product concept in various industries: automobiles, electronic, furnishing, gift articles,...

In the Stratos Hx series from 1,860 to 22,000 kN with hydro-mechanical clamping on the columns, mould dimensions and opening strokes are no longer a limit. The already-extensive geometric...

STRATOS DP machines can house two moulds simultaneously thanks to the special clamping unit with two mobile platens.
Between the two mobile plates is a fixed platen, attached to the machine base, on the two faces of which the fixed parts of the moulds are positioned.
The clamping...

{{productDetail[32360]}}

Product characteristics:

Energy saving, Low operating cost
The output of servo system is completely based on the required pressure and flow of machine, eliminating the reactive energy consumption, only 50% electricity consumption as comparing with...

Machine designed particularly for high voltage composite insulator applications.
Precise components and high quality supporting parts extending service...

Product characteristics
High precision, high output. extended service life
Precise components and high quality supporting...

Product characteristics:
Adopts plasticizing and injection completely separated, first-in-first-out...

Product characteristics:
Economical type product.

Simple...

{{productDetail[50783]}}

Auto Press - Rondol and Vogt automatic presses provide precise, durable and versatile performance. The Rondol benchtop Kompress and the Vogt floor-standing LaboPress range provide forces from 10 to 67 Tonne. All models feature...

Rondol Injection Moulding Machines are perfect for laboratory, batch and mass production of small medical components in a clean room environment. The Microject...

{{productDetail[77124]}}

The Evolution of Thin Wall Molding
Jonwai TW model has been introduced successfully to global thin wall package industry for past décade.
Up to now there are more than 2000 sets of TW machines in global service, providing customers...

The New Concept of Univeral Machines
Jonwai successfully established a classic model - SD séries for gênerai purpose molding in 2001.SD unique
combination of flexible, reliable & universal in application already...

Low A.A levels and very high throughout with outstanding melt quality are ensured by PM-series.
PM-series provide the high performance of the injection unit and précise for high productivity with help of the
robotic handling system to reduce...

The PET-series offer a complète package for the production of PET preform, based on the simple économie and
in-line screw design for easy-to-operate. Aside from the PET machine, the...

JONWAI - 30 years of Leading Expérience in Multi-Resin Molding Technology.
In 1982, JONWAI introduce the Ist 2-color injection molding machine in Taiwan,
Through décades of R&D...

{{productDetail[123929]}}

As a further specialty, Rohwedder Micro Assembly GmbH develops user-specific automation solutions for complete overmoulding...

{{productDetail[23486]}}

J-AD Series,” this next generation of all electric servo drive injection molding machines from JSW continues to lead the injection molding machine industry.
The...

Complying with safety regulations:
EU safety regulations (CE Marking)
Industrial machinery industry safety rules(JIMS K1001)


J-AD Series, this next generation...

Complying with safety regulations:
EU safety regulations (CE Marking)
Industrial machinery Industry safety rules (JIMS K1001)


An...

The movable platen is supported by a high-precision linear guide so that both the...

Features

- The most advance performance...

{{productDetail[51394]}}

Thermoplastic overmolding

Getelec has taken over KAP Press design and manufacture with an extended development programme of interest to all in the plastics fabrication sector.

Presses...

{{productDetail[12542]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation