|
|
PROXIMA with VULCAN, l’ interface operator remains the same one: DIXIT II.
D’ a rare user-friendliness, it is very quickly controlled by the teams of rulers in the workshops.
|
|
Two small diameter displace the moving platen and the 4 locking to the fully closed position.
Clamping unit principle:
The chock plate is driven behind the ends of the 4 locking columns and blocks the passage.
|
|
|
The HERCULE closing unit is activated by a hydraulic piston of a small diameter, being integrated into the locking cylinder. The double toggle behaves as a movement amplifier, allowing very high mould closing speeds with minimum energy consumption.
|
|
|
Through its vocation as a prime large machine manufacturer, BILLION proposes a new generation of machines based upon two-platen technology. This concept responds to the needs of processors in terms of performance, reliability, flexibility and profitability.
|
|
Innovative machine design from 4.500 kN to 55.000 kN clamping force
- High-performance with minimum space requirement thanks to compact two-platen clamping unit
- Long stroke despite small overall dimensions
- Highly-rigid clamp system with pressure pads requiring minimal oil
- Large platen dimension and tie bar spacing designed for optimum mold support
- Carriage guides provide precise platen movements independent of mould weight
- Sensitive mould protection thanks to low-friction platen guides mounted to the base frame
- Fast clamping system: Closing time between 0.2 and 1.5 seconds
- Easily expandable thanks to a wide range of interface options
- Complete range of 11 clamping units from 4.500 kN to 55.000 kN
- Graduated range of injection units from ES 2050 / … to ES 130500 / … makes it easy to design the right machine for any application
|
|
The universal machine in the small to mid-sized machine range, between 280 and 2,200 kN with hybrid drive concept as a combination of the tried-and-trusted ENGEL victory clamping unit with the ENGEL e-motion series injection units. The ENGEL e-victory is deployed wherever compatibility with an existing range of moulds, efficient mould changing and easy automation are required.
The ENGEL e-victory is the best machine for energy-saving production
- using moulds with hydraulic core-pulls and/or hot runner nozzles
- using hydraulic high speed mounting systems
- and it leverages the precision offered by an electric injection unit
- while at the same time benefiting from ENGEL's tie bar-less technology
|
|
|
|
|
|
More space for robots. More space for large moulds. More flexibility in your production.
Thanks to its intelligent tie bar-less technology, the ENGEL victory spex offers a decisive efficiency benefit: free access to the clamping unit. This means that robots can work quickly without needing to avoid obstacles. And you can change moulds easily in the shortest possible time.
Today‘s trends: same clamping force, larger moulds no tie bars also means: full utilisation of the mould fixing platens and thus maximum flexibility with respect to mould dimensions. This makes the ENGEL victory spex a genuine trendsetter. For an increasing number of injection moulding applications, the required mould size has grown considerably in relation to the projected part surface – this is partly due to the complex and sophisticated mould technology required in many applications.
Machines that can handle larger and more bulky moulds without changing the clamping force are thus in demand.
spex saves. Your efficiency benefits at a glance:
- No tie bars. Lots of space. The unique tie bar-less technology improves efficiency and economy in injection moulding production
- generous discharge chute width
- patented Flex-Link system for high precision platen parallelism and minimal wear and tear on the mould
- high energy efficiency
- comprehensive portfolio in the small to mid-range machine field with clamping forces between 500 kN and 4000 kN
- best price/performance ratio
|
|
The Battenfeld TM offers efficient production possibilities for a wide variety of applications:
* highly flexible due to the choice among 6 clamping units, 11 injection units and 15 different screw diameters
* sturdy 5-point toggle design for optimized closing forces and distribution as well as very precise platen movement
* high-performance plasticizing systems for all thermoplastic, thermoset and elastomer resins for shot weights of up to 5000 g PS
* high-performance UNILOG B6 control system
* automation with robots, pick-and-place devices and mold changing systems possible
|
|
The new, powerful high-speed model in the 160-450 ton clamping force range.
A high-speed variant has been added to the power packs of the proven TM series from WITTMANN BATTENFELD. The new, innovative TM Xpress series stands for excellent injection performance and accuracy.
The user-friendly Unilog B6 control system offers a wide range of functions, providing support in process monitoring and documentation.
Combine speed with cost-efficiency! Let the TM Xpress fascinate you!
|
|
The hydraulic-modular HM series stands for modular versatility, ultimate precision, short footprint and an extensive range of options for literally every application:
* highly flexible due to the choice among 8 clamping units, 9 injection units and 12 different screw diameters
* very short 2 resp. 3-platen design
* high-performance plasticizing systems for all thermoplastic, thermoset and elastomer resins for shot weights of up to 1300 g PS
* high-performance UNILOG B6 control system
* automation with robots, pick-and-place devices and mold changing systems possible
|
|
|
The ELION range, with clamping forces of 500 to 1750 kN, is all-electric and typical Netstal; forming a perfect synthesis of classic Netstal injection moulding machine features with new, innovative characteristics. Each axis is specifically designed for the all-electric drive system - numerous actual customer requirements influenced the construction of the machine.
|
|
|
SynErgy machines from Netstal are characterised by five basic strengths: speed, precision, reliability, user-friendliness and operational efficiency. As a result of these performance features, the SynErgy range has firmly established itself in the global market. In particular, this user-friendly, high-performance machine displays it’s capabilities to the full when meeting complex requirements with respect to moulded parts and the injection moulding process.
|
|
Large machines
King discipline for DESMA, the manufacture of large machines with clamping forces up to 40,000 kN and injection volumes up to 25,000 cm3. Typical fields of application are bladder productions for the tyre industry, membranes for filtration, large couplings, etc.
Technical feautures
* clamping forces 18,000 kN and 40,000 kN
* injection volume up to 25,000 cm³
* applications: bladders for the tire industry, membranes for filtration
|
|
| ... products without technical information |
| |
Vac-U-Lok has a wide selection of vacuum accessories for all of your vacuum system needs. No vacuum workholding system is complete without a coolant return system. Please review the items shown below to best determine the equipment you need to complete your vacuum workholding system.
- Automatic Coolant Return System ACRS-1
The ACRS-1 will drain 10 gallons per hour-automatically!
- Automatic Coolant Return System
ACRS-3HD
This unit will drain 55 gallons of coolant per hour-automatically!
- Automatic Coolant Return System
ACRS-3HD-3NPT
NEW! 100 gallons per hour draining capacity while still under vacuum!
|
|
• Huck BOM
-Very high strength/diameter ratio – can be used in demanding structural applications as an
alternative to threaded fasteners or welding
-Very high joint tightness when compared to conventional blind fasteners
-Very resistant to tampering, extremely hard to remove
-Excellent gap closure capability
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm
|
|
... see all the products in the category
Rivets
|
|
Vac-U-Lok has a complete selection of vacuum systems to meet any need!!! The medium duty vacuum systems offering includes two units - 4.5 CFM (cubic feet per minute) vacuum system and a 10 CFM vacuum system. Our heavy duty vacuum system offering ranges from a 7 CFM unit to a powerful 460 CFM central vacuum system unit. Of course, Vac-U-Lok can custom design any vacuum system, large or small, to meet your specific requirements.
|
|
Bushman AvonTec manufactures a complete line of sheet and plate lifters engineered to meet a variety of dimensional, capacity and application requirements.
Bushman AvonTec sheet lifters have many production applications and numerous optional features to customize the equipment to your individual needs.
|
|
|
The lifting clamp is removable loading gripper equipment used on a lifting apparatus for lifting and transporting individual flat. Loading capacity max Kg. 1000. The thickness of the glass plates can be from 4 till 55 mm.
|
|
Bushman AvonTec manufactures a complete line of coil brabs that have been engineered to meet a variety of dimensional, capacity and special application needs. Quality-built throughout, these lifters will provide years of continuous, safe, efficient coil handling.
Bushman AvonTec manufactures coil grabs with heavy steel weldments to protect the integrity of the coil. They feature:
- Telescoping, motor-driven legs.
- Formed, curved saddles on the lifting surfaces.
- Limit switch in the lifting pad to prevent accidental opening under load.
|
|
Bushman AvonTec manufactures drum handling equipment that holds drums securely during pick up, movement, and discharge operations. Each ergonomically designed lifter permits precise rotation, from the vertical to the horizontal plane and beyond, for controlled pouring and dumping.
All Bushman AvonTec's drum handling units meet or exceed the requirements of the latest revisions of ASME Specifications B30.20 and BTH-1, Design of Below-the-Hook Lifting Devices.
Each unit has a 3 to 1 safety factor, based on the yield strength of the material. This protects the operator, drum and its contents.
The self-locking worm drive speed reducer holds the drum in position without roll-back.
In addition to the standard features described below, most Bushman AvonTec drum tilters can be modified for a variety of different drum sizes and types including those frequently used for hazardous materials.
|
|
| ... products without technical information |
| |
|
|
|
|
Style 360 Repair Clamp
The Dresser® Style 360® repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple! Moreover, special one-inch long nuts allow the use of a standard deep socket wrench for complete tightening. In the popular 7.5 inch clamp width, there is also a third nut so
the middle nut can be used to pre-tighten the clamp.
Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening.
With the "360" clamp you can repair holes, breaks and splits in the pipeline. You can use it where pipe ends are separated, or where ends are deflected up to 4 degrees or 1/8 inch. Or you can join two pipes with a variation of 1/4 inch outside diameter.
Clamp features include a tapered gasket with a gridded design and the spanner is molded flush with the gasket to prevent "hang up." The "360" has a stainless band, lugs of rugged ductile iron and bolts of corrosion-resistant Dresserloy.
|
|
Style 194 Service Saddle
For use on PVC Pipe (IPS, OD)
Offers 360-degree support for taps off plastic mains
Designed with plastic pipe in mind, the Style 194 service saddle provides a low cost efficient means for supporting the pipe where service taps are made.
Check these advantages:
- Simply "wraps" around the pipe. One bolt to tighten.
- Full 360-degree support of the pipe, with designed-in safeguard against overtightening. Cannot deform the pipe.
- Recessed rubber compound gasket is confined, cannot blow-out, or cold-flow to weaken the seal.
- Boss furnished with either corporation or IPT threads, to suit your standards. 3/4" and 1" tap sizes available.
- Rugged malleable iron bodies are galvanized for long service life. Bolt is corrosion-resistant Dresserloy, cadmium plated.
|
|
| ... products without technical information |
| |
Manual Pallet Changers
- Maximize productivity with minimial spindle downtime and faster cycle times
- Fast & accurate operation
- Repeatability of +/- .0001
- Intergrated Clamping System features machinable jaws
- Simple to off-line load or on-machine load workpieces
- Pallets available in three styles: Plain, Vacuum Chuck, or Integrated Clamping System
- Easy to operate
|
|
High Quality For Superior Weldability and Fit Up. WCB-Flow Products quality means dependable concentricity and dimensional correctness. WCB-FP Fittings ‘fit’ and weldability is assured. Committment to Quality and Excellence in Manufacturing and Customer Service. As a major supplier of Stainless Steel Fittings, Valves, Pumps and Process Equipment,
WCB-Flow Products has established a record of precision engineering and quality manufacturing. WCB-FP has a long-standing reputation for excellence in Technical and Customer Service. We maintain
large inventories of the fittings you need.
|
|
|
|
