|
|
|
The HERCULE closing unit is activated by a hydraulic piston of a small diameter, being integrated into the locking cylinder. The double toggle behaves as a movement amplifier, allowing very high mould closing speeds with minimum energy consumption.
|
|
PROXIMA with VULCAN, l’ interface operator remains the same one: DIXIT II.
D’ a rare user-friendliness, it is very quickly controlled by the teams of rulers in the workshops.
|
|
Two small diameter displace the moving platen and the 4 locking to the fully closed position.
Clamping unit principle:
The chock plate is driven behind the ends of the 4 locking columns and blocks the passage.
|
|
|
Through its vocation as a prime large machine manufacturer, BILLION proposes a new generation of machines based upon two-platen technology. This concept responds to the needs of processors in terms of performance, reliability, flexibility and profitability.
|
|
The universal machine in the small to mid-sized machine range, between 280 and 2,200 kN with hybrid drive concept as a combination of the tried-and-trusted ENGEL victory clamping unit with the ENGEL e-motion series injection units. The ENGEL e-victory is deployed wherever compatibility with an existing range of moulds, efficient mould changing and easy automation are required.
The ENGEL e-victory is the best machine for energy-saving production
- using moulds with hydraulic core-pulls and/or hot runner nozzles
- using hydraulic high speed mounting systems
- and it leverages the precision offered by an electric injection unit
- while at the same time benefiting from ENGEL's tie bar-less technology
|
|
Innovative machine design from 4.500 kN to 55.000 kN clamping force
- High-performance with minimum space requirement thanks to compact two-platen clamping unit
- Long stroke despite small overall dimensions
- Highly-rigid clamp system with pressure pads requiring minimal oil
- Large platen dimension and tie bar spacing designed for optimum mold support
- Carriage guides provide precise platen movements independent of mould weight
- Sensitive mould protection thanks to low-friction platen guides mounted to the base frame
- Fast clamping system: Closing time between 0.2 and 1.5 seconds
- Easily expandable thanks to a wide range of interface options
- Complete range of 11 clamping units from 4.500 kN to 55.000 kN
- Graduated range of injection units from ES 2050 / … to ES 130500 / … makes it easy to design the right machine for any application
|
|
|
|
|
|
More space for robots. More space for large moulds. More flexibility in your production.
Thanks to its intelligent tie bar-less technology, the ENGEL victory spex offers a decisive efficiency benefit: free access to the clamping unit. This means that robots can work quickly without needing to avoid obstacles. And you can change moulds easily in the shortest possible time.
Today‘s trends: same clamping force, larger moulds no tie bars also means: full utilisation of the mould fixing platens and thus maximum flexibility with respect to mould dimensions. This makes the ENGEL victory spex a genuine trendsetter. For an increasing number of injection moulding applications, the required mould size has grown considerably in relation to the projected part surface – this is partly due to the complex and sophisticated mould technology required in many applications.
Machines that can handle larger and more bulky moulds without changing the clamping force are thus in demand.
spex saves. Your efficiency benefits at a glance:
- No tie bars. Lots of space. The unique tie bar-less technology improves efficiency and economy in injection moulding production
- generous discharge chute width
- patented Flex-Link system for high precision platen parallelism and minimal wear and tear on the mould
- high energy efficiency
- comprehensive portfolio in the small to mid-range machine field with clamping forces between 500 kN and 4000 kN
- best price/performance ratio
|
|
The Battenfeld TM offers efficient production possibilities for a wide variety of applications:
* highly flexible due to the choice among 6 clamping units, 11 injection units and 15 different screw diameters
* sturdy 5-point toggle design for optimized closing forces and distribution as well as very precise platen movement
* high-performance plasticizing systems for all thermoplastic, thermoset and elastomer resins for shot weights of up to 5000 g PS
* high-performance UNILOG B6 control system
* automation with robots, pick-and-place devices and mold changing systems possible
|
|
The hydraulic-modular HM series stands for modular versatility, ultimate precision, short footprint and an extensive range of options for literally every application:
* highly flexible due to the choice among 8 clamping units, 9 injection units and 12 different screw diameters
* very short 2 resp. 3-platen design
* high-performance plasticizing systems for all thermoplastic, thermoset and elastomer resins for shot weights of up to 1300 g PS
* high-performance UNILOG B6 control system
* automation with robots, pick-and-place devices and mold changing systems possible
|
|
The new, powerful high-speed model in the 160-450 ton clamping force range.
A high-speed variant has been added to the power packs of the proven TM series from WITTMANN BATTENFELD. The new, innovative TM Xpress series stands for excellent injection performance and accuracy.
The user-friendly Unilog B6 control system offers a wide range of functions, providing support in process monitoring and documentation.
Combine speed with cost-efficiency! Let the TM Xpress fascinate you!
|
|
|
SynErgy machines from Netstal are characterised by five basic strengths: speed, precision, reliability, user-friendliness and operational efficiency. As a result of these performance features, the SynErgy range has firmly established itself in the global market. In particular, this user-friendly, high-performance machine displays it’s capabilities to the full when meeting complex requirements with respect to moulded parts and the injection moulding process.
|
|
|
The ELION range, with clamping forces of 500 to 1750 kN, is all-electric and typical Netstal; forming a perfect synthesis of classic Netstal injection moulding machine features with new, innovative characteristics. Each axis is specifically designed for the all-electric drive system - numerous actual customer requirements influenced the construction of the machine.
|
|
Large machines
King discipline for DESMA, the manufacture of large machines with clamping forces up to 40,000 kN and injection volumes up to 25,000 cm3. Typical fields of application are bladder productions for the tyre industry, membranes for filtration, large couplings, etc.
Technical feautures
* clamping forces 18,000 kN and 40,000 kN
* injection volume up to 25,000 cm³
* applications: bladders for the tire industry, membranes for filtration
|
|
| ... products without technical information |
| |
|
|
|
|
The battery-powered ultrasonic flowmeter FLUXUS® F601 is an ideal tool for service work and quick control measurements. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption.
The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. Transducers are available for pipe diameters from 6 mm to 6500 mm and for temperatures ranging from -40°C to 400°C (more). Two pairs of transducers usually are enough to realize all standard industrial applications. FLUXUS F601 is thus highly flexible and can be used on the most various applications on totally different measuring points.
FLUXUS® F601 has been engineered for the harsh conditions of industrial installations. Its housing is water and dust tight and resistant against oil, many liquids and dirt. The meter and its many accessories are delivered in a sturdy waterproof transport case which dimensions fulfil the airline requirements for carry-on luggage.
Thanks to advanced battery management and Lithium ions battery, F601 allows for more than 14 hours of battery-powered measurement. The remaining battery capacity is displayed and helps planning measuring campaigns realistically.
Beside the standard version, F601 can also be delivered with a wider range of signal inputs and outputs (Multifunctional version), as well as in the Energy version with high precision temperature probes making the energy measurement more powerful than ever.
|
|
KROHNE’s OPTISONIC 6300 stands for continuity and long term reliability. Flow measurement can be done anywhere and start-up is immediate. The new OPTISONIC 6300 clamp-on flowmeter with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling.
|
|
|
Dynasonics hybrid ultrasonic flow meters utilize both Doppler and transit time sound techniques and automatically select the correct technology to calculate the flow rate. This dual technology provides an accurate measurement of the volumetric flow of clean, solids-bearing or gaseous liquids on full pipes. Adverse flow conditions - surges, particulate, gas pockets, etc. - will not clog, damage or influence accuracy of the "flow-through" meter design.
|
|
|
Dynasonics TFX Ultra ultrasonic flow and energy meter clamps onto the outside of pipes and do not contact the internal liquid. Available in stand alone flow meter or as an energy flow meter used in conjunction with dual clamp-on RTDs measuring energy usage. Available in integral and remote mount systems, both in a rugged, aluminum enclosure. Reduced material costs, installation time and maintenance costs make this the ideal flow meter for nearly all liquid applications.
|
|
|
The Series TFXL ultrasonic transit time flow meter is a reliable and cost-effective flow meter designed to replace mechanical meters where liquid conditions damage or impede operation. This non-invasive flow meter requires no maintenance, as it clamps on to the outside of the pipe. It provides a 4-20mA analog and simulated turbine meter frequency output, interfacing with a variety of monitoring equipment. The TFXL is available in an integral mount system for pipes size .5" (12mm) to 2” (50mm), and a remote system for pipes size .5" [12mm] and larger.
|
|
|
|
|
|
Our Innova-Sonic digital liquid flow meters are state-of-the-art universal transit-time instruments incorporating the latest advances in digital signal processing. The Innova-Sonic™ Portable Model 210 clamp-on features an industry-unique Bluetooth® wireless PDA interface for a truly flexible and convenient liquid flow measurement tool. Innova-Sonic™ Model 205 is our dedicated/fixed display readout version with non-invasive clamp-on transducers.
Our Innova-Sonic™ Insertion Model 205 features insertion transducers resulting in high signal strength in challenging applications and extremely large pipes.
While principally designed for clean liquid applications, all instruments in our Innova-Sonic family are tolerant of liquids with small amounts of air bubbles or suspended solids common in most industrial environments. All Innova-Sonic liquid flow meters offer low power consumption, high reliability and outstanding applicability at an economical cost.
UNIQUE PRODUCT FEATURES
- Accuracy better than +/-1%
- Wide operating temperature range -40F to +212F (-40C to 100C) (210 Innov-Sonic)
- One meter for a wide range of pipe sizes 1-200” (25mm-5000mm)
- 256MB Tungsten™ T5 PDA interface with Bluetooth wireless
- Numerical and graphical display interface
- Battery power supply with battery recharge port (including spare battery)
- Low installation effort and costs
- Wide bi-directional Flow range of 0 to 40 fps
-Measurement is independent of fluid conductivity
|
|
|
|
|
|
Clamp-on ultrasonic flowmeters
The SITRANS F US clamp-on ultrasonic flow technology offers several advantages, number one being the utilization of external transducers. These are quickly and easily mounted on the outside of the pipe, making them the perfect choice for retrofit applications and applications where corrosive, toxic or high pressure liquids and gases rule out the option of cutting the pipe.
With the use of the WideBeam technology, clamp-on flowmeters from Siemens have proven their superiority in both the field and the lab. They offer several benefits such as measurement of practically any liquid and gas; performance unaffected by viscosity, flow rate, pipe size, solids and aeration content; high accuracy and repeatability through automatic temperature compensation and zero drift correction; and installation flexibility on pipe sizes up to DN9140 (360 inches). They are available in six families: two geared towards general industry solutions and four tailored to energy, liquid hydrocarbon, gas and portable installations.
Combine this with flexible configuration options that allow you to either customize your flowmeter or to order complete systems, you can rest assured that we have the right solution for you.
|
|
|
GE Panametrics' GC868 flowmeter is a fixed-installation flowmeter comprised of the GC868 electronics, a pair of advanced clamp-on ultrasonic transducers, a clamping fixture, a preamplifier located near the transducers and coaxial cables to connect the transducers to the preamplifier and GC868 electronics. The DigitalFlow™ GC868 flowmeter can be used to measure the flow of any gas or steam.
|
|
|
The Preso ThermoTrack is a non-invasive ultrasonic flow meter combined with non-invasive temperature sensors, to measure energy use in water-based HVAC systems. No sensors come in contact with the liquid and there are no moving parts, so downtime and maintenance are eliminated. The flow meter utilizes transit time ultrasonic technology and the temperature sensors are Pt1000 RTDs. The flow rate, supply line temperature and return line temperature measurements provide the necessary inputs to calculate energy use, displayed in BTUs, Calories or Watts. The ThermoTrack is available for pipe sizes 1/2" (12 mm) and larger, with a variety of power supply and output options available.
|
|
The MINISONIC P & P-B flowmeters are THE new portable metering tools.
Features include :
- a massive battery life : up to 40 h
- very light weight at 850 g
- Ingress protection IP 67
New measurement technology 'ESC' (or Echo Shape Control), this is an automatic function, essentially an ultrasonic auto-focus, which offers the warranty of quick, sure and accurate flow measurement.
The dual pipe version can calculate, display and transmit a QT flow value equal to the sum or the difference of the two flows that device measures on two independent pipes. It is possible to install the two set of transducers on a same pipe and closed to each other to improve the measurement reliability or better at two different locations and do a line balance or a leak detection.
The portable MINISONIC offer other important advantages :
- measurement resolution < 0.1 ns
- A higher amplification gain range and noise rejection
- an ergonomic keypad and menu calibration, back-lighted display
|
|
|
|
|
|
Clamp-on Ultrasonic Flowmeter with DSP Technology
The MUL-310 is a "Time of flight" type Ultrasonic Flowmeter for liquids. Since the ultrasonic receiver required for the flow measurement is installed by the clamp-on system on the exterior of the pipe, it does not contact the measuring fluid at all, and also there are no concerns about particle generation or contamination of metallic ions in the fluid as it is truly non-invasive. It is suitable for the flow rate measurement of pure water and ultra pure water for the semiconductor industry. The resistance to bubble interference in the signal has been sharply improved by the new signal process method "DSP"(Digital Signal Processor). If bubbles are contained in the fluid, the transmission of the ultrasonic signal is impeded and signal recognition becomes difficult resulting in a loss of signal. Digital Signal Processing technology has been adopted for MUL-310, and even if the bubbles are contained in the fluid, the stable measurement of signal can be achieved. This product does not have limitations in terms of volume of bubbles by air volume being less than 10%. (It is not possible to recognize the signal in case of fluid streams with excessive bubbles)
|
|
Static compact energy meter using ultrasonic technology
highly accurate recording of all billing data in local and district heating and cooling systems
|
|
|
|
see the results for the following category : 
