|
|
|
The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies.
|
|
3D PIPE DIGITAL VISION
Digital video recording of the entire pipe
3D navigation and pipe unfolded view on computer
Pipe Ø 150 to 600 mm
ADVANTAGES
Report and inspection analysis in the vehicle or at the office
Compatible with our inspection report software HYDROSCAN (EN 13508-2 standard)
Strongly built (axial camera)
Full pipe video recording in one examination
|
|
The Evolutis range enables the video inspection of pipes that are 55 to 1200 mm in diameter.
Available in a portable version, the system is compact, evolutionary and uses the same camera tractor installations as the "equipped van" version.
|
|
HYDROZOOM equipment is intended to carry out a quick visual inspection of pipe work from a manhole.
It consists of a console with screen connected by a cable to a camera module.
The camera integrates a zoom feature and power LED lighting enabling the general condition of the networks to be quickly assessed.
. Pipe inspection Ø 100 à 1000 mm, from manholes
. Camera with optical zoom X 18
. Cable length 15 meters max.
. LED light
. Integrated batteries 12 V DC
. Photo and video memory card recorder
|
|
HYDROVIDEO has designed two reliable, portable systems that are completely autonomous for inspecting small diameter pipes
(HV mini and ball camera).
These systems are either intended for the connections of sewage networks or industrial pipes.
|
|
Mini range
HYDROVIDEO has designed two reliable, portable systems that are completely autonomous for inspecting small diameter pipes
(HV mini and ball camera).
These systems are either intended for the connections of sewage networks or industrial pipes.
|
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
DE-F SERIES
Mask-less, New Matrix Beam scan method Suitable for general PWB process with excellent cost-performance
|
|
Surface inspection systems ELSIS
Inspection systems for sheet-type running webs. For process optimization in production lines or quality control at the machine entry or exit end.
Various systems are available to meet the characteristics of the given type of material, of the application conditions and of the task to be performed: for a higher return on investment thanks to better quality and higher productivity!
|
|
EDIXIA proposes a wide range of inspection solutions to automotive manufacturers and to their suppliers:
Inspection of headlamps: photometry and headlamp aiming
Conformity of casting parts: engine and braking parts
Main benefits:
Reduction of expensive product returns
Rationalization of your excellence guarantee tools 100% and contactless inspection
Reliable and repeatable measurements
Easy to implement
Discover our products
3DCastE
3DCastB
CELIA & PHAREDIX
|
|
|
Rudolph Technologies provides automated wafer edge top and edge normal inspection with throughputs of greater than 80 WPH (300 mm). The Class 1 certified system has an approximate 10 minute set-up time to be fully optimized and production ready. Featuring on-the-fly color defect image capture and intrinsic ADC capabilities, the E25 System can automatically detect and classify defects on the entire wafer edge, from the edge exclusion area to the bottom bevel. Both brightfield and darkfield illumination are available.
|
|
|
The Rudolph Wafer device combines both edge and backside inspection into one enclosure. It retains all the capabilities of the proven E25 and B20 System in one small footprint. The Class 1 certified system can automatically detect defects on the entire edge, from zone 1 to 5, and the entire backside. The ability to inspect the entire backside allows for faster root-cause analysis of zone 5 defects since such defects can migrate from the wafer interior.
|
|
|
The bench|mate is an economically priced, very compact high-resolution X-ray system for a variety of inspection tasks. Its modular setup enables the customer to easily upgrade the system to meet more advanced inspection requirements.
|
|
The ml|inspector is a high-resolution microfocus X-ray system designed for inspecting multilayer boards.
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
GE Inspection Technologies is a leading developer of eddy current instruments, testing machines, and sensors for industrial applications requiring surface and sub-surface crack detection and metal sorting. GE Inspection Technologies' non destructive eddy current testing equipment and solutions will meet the critical requirements of your unique application and deliver productivity, quality, and safety.
|
|
Verimation’s Verimet® 7700 Portable Eddy Current Tester is a portable micro processor-based eddy current instrument for heat verification, alloy sorting, hardness inspection and case depth testing of ferrous metal parts. Versatile and accurate it offers improved capabilities for a wide range of applications. The instrument is compact, lightweight and battery equipped so it is very easy to use.
|
|
The modular design is common to all systems: Host PC, measuring channels and interface module are separate from each other. The measuring channel execute the measurement and pass the measuring results to the Host PC whereas the interface module control the communication between Host PC and the equipment PLC. These testing equipment structures have resulted in very cost-effective solutions.
Applications: Quality control by non- destructive testing during the production of wires, cables, rods, bars, tubes and coils.
Material thickness: All metals
Measuring method: Eddy current measurement
Functional principle: When the material passes / transits the sensor, irregularities (welding faults like cracks, pores or circumferential faults) will be detected by changes of the eddy currents within the material.
Special features: Modular design based on the separation of measurement channels, interface module and Host PC.
|
|
ETA™ physical test systems
Quality assurance with high precision
High productivity requires appropriate process equipment combined with efficient inline and offline quality assurance systems. In order to optimize the production process, which means balancing highest throughput and defined quality, precise measurements are of key importance.
AudioDev offers a complete family of ETA inline and offline measurement systems. Based on the core competences in Spectrometry and Laser Technology, the measurement systems generate the most precise measurements. Most systems are turn-key solutions equipped with state-of-the-art hardware and software modules, designed for easy operation.
ETA-systems belong to the most efficient and reliable process control systems installed at manufacturing facilities worldwide.
|
|
Canadian Standard Freeness Tester determines the rate of drainage of a dilute pulp suspension and express it in terms of freeness. The rate of drainage is related to the work done on the fibre during beating or refining. Two models are offered: Wall mounted (brass), and stand model (stainless steel).
APPLICATIONS
Pulp, Synthetic fibres
STANDARDS
Meets TAPPI T227, ISO 5267/2, AS/NZ 1301, 206s, BS 6035 part 2, and CPPA C1
FEATURES
* Calibrated and traceable to industry standards
* Easy to operate
* Extremely accurate
* Durable, heavy construction
* Stand model is constructed of corrosion resistant stainless steel and Wall model is constructed of brass
|
|
This self-contained, PFI-type pulp beater subjects pulp to a specific beating schedule to process pulp prior to forming hand sheets.
APPLICATIONS
Pulp Preparation
SPECIFICATIONS
* Conforms to CPPA C7, TAPPI T-248 and ISO 5264-2.
* Paprican certification available.
FEATURES
* Integrated wash cycle
* Roll, bedplate and all external panels are 316
* Stainless Steel for easy cleaning
* Automatic raising and lowering of beater roll for safety and convenience
* Front panel LED indicators show control sequence status for convenient monitoring and troubleshooting
* All controls and sequences are on conveniently located touch pad control panel.
* Digital counter
* End of cycle alarm
|
|
The Standard Sheet Former includes all of the accessories required to prepare 159 mm hand-sheets in accordance with the appropriate standards. This stainless steel device produces laboratory hand sheets to allow the test and evaluation of the physical properties of pulp.
APPLICATIONS
Pulp, Paper, Recycled Paper
SPECIFICATIONS
* Complies with TAPPI T-205 & T-218, PAPTAC C.4 & C.5, ISO 5269/1, SCAN C26
FEATURES
* Durable, 316 Stainless steel construction
* Polymer sump
* Manual stirrer and inlet valve
* Unique latch system that ensures a proper seal of the deckle
* Complete with grid plate, stirrer, couch roll, 2 couch plates
* White Water Return System available (option)
|
|
|
The nanotom® is the first 180 kV / 15W nanofocus® computed tomography system perfectly tailored to applications in materials science, micromechanics, electronics and biology.
|
|
| ... products without technical information |
| |
|
|
