|
|
|
Verimation Technology, Inc. is a leading manufacture of Ultrasound Test Systems for automotive applications. This method of Non-Destructive Testing is very accurate and reliable. Testing is performed by coupling short bursts of high frequency sound waves to the test part. The wave patterns are then analyzed and test results are generated. This method of testing can find internal flaws and analyze material properties without cutting or destroying the part.
|
|
Laser Inspection
Winbro’s triangulation laser sensing provides a non-contact method of inspecting hole position on both metallic and coated components, following EDM or Laser Drilling and also feature measurement following HSM (High Speed EDM Milling).
|
|
Inspection of glue bead dispensing
The products of Cordia range inspect the conformity of beads or glue application whatever their colour: extruded and fiberised beads and on all supports (sheet metal, aluminium, cast iron, glass).
The bead is inspected on all its length and for all the following characteristics :
- Continuity (glue lack or air bubbles causing interruptions)
- Width
- Position relative to references (distance to an edge, a hole... or position relative in the part benchmark)
- Height (3D configuration)
These functions are performed by a unique Cordia system.
Independent from the colour of the bead and the nature of the support
Robustness and reliability
Easy integration and implementation
Discover our products
Cordia F2D
Cordia M2D
Cordia M3D
Weld inspection
|
|
|
The v|tome|x s is an ultra high-resolution CT system, equipped with a special image grabbing and processing software.
|
|
3D PIPE DIGITAL VISION
Digital video recording of the entire pipe
3D navigation and pipe unfolded view on computer
Pipe Ø 150 to 600 mm
ADVANTAGES
Report and inspection analysis in the vehicle or at the office
Compatible with our inspection report software HYDROSCAN (EN 13508-2 standard)
Strongly built (axial camera)
Full pipe video recording in one examination
|
|
The Evolutis range enables the video inspection of pipes that are 55 to 1200 mm in diameter.
Available in a portable version, the system is compact, evolutionary and uses the same camera tractor installations as the "equipped van" version.
|
|
HYDROZOOM equipment is intended to carry out a quick visual inspection of pipe work from a manhole.
It consists of a console with screen connected by a cable to a camera module.
The camera integrates a zoom feature and power LED lighting enabling the general condition of the networks to be quickly assessed.
. Pipe inspection Ø 100 à 1000 mm, from manholes
. Camera with optical zoom X 18
. Cable length 15 meters max.
. LED light
. Integrated batteries 12 V DC
. Photo and video memory card recorder
|
|
HYDROVIDEO has designed two reliable, portable systems that are completely autonomous for inspecting small diameter pipes
(HV mini and ball camera).
These systems are either intended for the connections of sewage networks or industrial pipes.
|
|
Mini range
HYDROVIDEO has designed two reliable, portable systems that are completely autonomous for inspecting small diameter pipes
(HV mini and ball camera).
These systems are either intended for the connections of sewage networks or industrial pipes.
|
|
Surface inspection systems ELSIS
Inspection systems for sheet-type running webs. For process optimization in production lines or quality control at the machine entry or exit end.
Various systems are available to meet the characteristics of the given type of material, of the application conditions and of the task to be performed: for a higher return on investment thanks to better quality and higher productivity!
|
|
EDIXIA proposes a wide range of inspection solutions to automotive manufacturers and to their suppliers:
Inspection of headlamps: photometry and headlamp aiming
Conformity of casting parts: engine and braking parts
Main benefits:
Reduction of expensive product returns
Rationalization of your excellence guarantee tools 100% and contactless inspection
Reliable and repeatable measurements
Easy to implement
Discover our products
3DCastE
3DCastB
CELIA & PHAREDIX
|
|
|
The nanotom® is the first 180 kV / 15W nanofocus® computed tomography system perfectly tailored to applications in materials science, micromechanics, electronics and biology.
|
|
|
Marposs non-destructive testing technologies offer solutions based on the eddy current method for 100-percent inspection of critical components required to meet today's safety and reliability concerns.
|
|
Portable shearography (Q-810)
Non-Destructive Inspection
* Fast inspection of composite structures
* Field inspection
* Portable system
* Easy operation
The Portable Shearography System Q-810 is a fully portable and compact inspection system for fast inspection of components made from composite structures like aircraft fuselages and components, rocket shell parts, marine ship hulls, pipes, etc..
The system is fully portable and is designed for field inspection services. The Portable Shearography Inspection System Q- 810 consists of a vacuum hood with flexible sealings, which can be attached to the component to be inspected.
Inside the hood a vacuum up to 150 mbar can be pulled in order to stress the material underneath the hood. Any debonding or structural defect will be detected by the integrated shearography camera. The camera image is analyzed by the software package ISTRA for Windows® and displayed on a computer monitor and head up display.
|
|
GE Inspection Technologies is a leading developer of eddy current instruments, testing machines, and sensors for industrial applications requiring surface and sub-surface crack detection and metal sorting. GE Inspection Technologies' non destructive eddy current testing equipment and solutions will meet the critical requirements of your unique application and deliver productivity, quality, and safety.
|
|
Verimation’s Verimet® 7700 Portable Eddy Current Tester is a portable micro processor-based eddy current instrument for heat verification, alloy sorting, hardness inspection and case depth testing of ferrous metal parts. Versatile and accurate it offers improved capabilities for a wide range of applications. The instrument is compact, lightweight and battery equipped so it is very easy to use.
|
|
The modular design is common to all systems: Host PC, measuring channels and interface module are separate from each other. The measuring channel execute the measurement and pass the measuring results to the Host PC whereas the interface module control the communication between Host PC and the equipment PLC. These testing equipment structures have resulted in very cost-effective solutions.
Applications: Quality control by non- destructive testing during the production of wires, cables, rods, bars, tubes and coils.
Material thickness: All metals
Measuring method: Eddy current measurement
Functional principle: When the material passes / transits the sensor, irregularities (welding faults like cracks, pores or circumferential faults) will be detected by changes of the eddy currents within the material.
Special features: Modular design based on the separation of measurement channels, interface module and Host PC.
|
|
|
|
|
|
The shearography technology is an interferometric test method with which damage or defects can be identified on components under load. This measuring technique even allows detecting deformations of only a few micrometers in size. Already a relatively low component load can thus yield unambiguous measuring results, which are mandatory particularly for NDT testing.
The test object is illuminated with laser light and observed through a CCD camera equipped with the so-called shearing optics. These shearing optics project the object image onto the camera chip twice; each object point is thus represented twice on the CCD chip. When the test object deforms under load, the laser light reflected by the component changes. By superimposing an image showing the unloaded object state with an image taken in the loaded state, the change of an image point can be determined. The optimum test load type (thermal load or pressure and vacuum load) for the individual component depends on the fault type and fault depth and is ideally determined before serial testing by trial measurements using sample components.
|
|
Canadian Standard Freeness Tester determines the rate of drainage of a dilute pulp suspension and express it in terms of freeness. The rate of drainage is related to the work done on the fibre during beating or refining. Two models are offered: Wall mounted (brass), and stand model (stainless steel).
APPLICATIONS
Pulp, Synthetic fibres
STANDARDS
Meets TAPPI T227, ISO 5267/2, AS/NZ 1301, 206s, BS 6035 part 2, and CPPA C1
FEATURES
* Calibrated and traceable to industry standards
* Easy to operate
* Extremely accurate
* Durable, heavy construction
* Stand model is constructed of corrosion resistant stainless steel and Wall model is constructed of brass
|
|
This self-contained, PFI-type pulp beater subjects pulp to a specific beating schedule to process pulp prior to forming hand sheets.
APPLICATIONS
Pulp Preparation
SPECIFICATIONS
* Conforms to CPPA C7, TAPPI T-248 and ISO 5264-2.
* Paprican certification available.
FEATURES
* Integrated wash cycle
* Roll, bedplate and all external panels are 316
* Stainless Steel for easy cleaning
* Automatic raising and lowering of beater roll for safety and convenience
* Front panel LED indicators show control sequence status for convenient monitoring and troubleshooting
* All controls and sequences are on conveniently located touch pad control panel.
* Digital counter
* End of cycle alarm
|
|
The Standard Sheet Former includes all of the accessories required to prepare 159 mm hand-sheets in accordance with the appropriate standards. This stainless steel device produces laboratory hand sheets to allow the test and evaluation of the physical properties of pulp.
APPLICATIONS
Pulp, Paper, Recycled Paper
SPECIFICATIONS
* Complies with TAPPI T-205 & T-218, PAPTAC C.4 & C.5, ISO 5269/1, SCAN C26
FEATURES
* Durable, 316 Stainless steel construction
* Polymer sump
* Manual stirrer and inlet valve
* Unique latch system that ensures a proper seal of the deckle
* Complete with grid plate, stirrer, couch roll, 2 couch plates
* White Water Return System available (option)
|
|
| ... products without technical information |
| |
|
|
