|
|
X-Strata980 for analysis of trace elements and coating thickness
Combining a high power X-ray tube and high resolution detector, the X-Strata980 X-ray Fluorescence analyzer delivers limits of detection in single digit ppms!
Oxford Instruments offers a full range of instruments dedicated to the electronics manufacturing industry. Our XRF instruments are available in different configurations; for RoHS compliance screening and testing. Please contact us to find out about the wide variety of solutions offered.
Key Applications:
Trace analysis of hazardous substances
Solder alloy analysis
Coating thickness measurement of gold and palladium on electronics
Metal alloy chemistry identification
Coating thickness measurement on jewelry
|
|
|
|
|
|
Features:
Thick800 is specially designed for rapid and non-destructive detection of plating thickness and elemental analysis. Thick800 adopts best lightening structure, 3-D movable sample platform and laser positioning system, which enable the point-by-point detection of plating thickness and elemental content on large-size sample.The up-and-down movable glass shield helps to prevent the radiation of X-Rays away from operator.
Technical Specifications:
Analysis Range: Element K~U.
Multiple layers are able to be analyzed simultaneously.
The accurate of thickness measurement is 10nm.
More than 5 layers can be analyzed simultaneously.
Independent matrix effect correction models.
Most advanced thickness analysis recipes.
Repeatability is up to 10nm.
Long-period Working Stability and feasibility is lower than 10nm.
Configurations:
Open sample chamber
3-D movement is realized by 2-D movable platform and up-and-down movement of detector and x-ray tube.
Double-laser positioning system.
Automatic collimator switch
Glass shield cap
Electronic circuit for signal detection
High and low voltage power supply
Electro-cooling Si-Pin semiconductor detector instead of liquid nitrogen cooling ones
X-ray tube
PC and ink-jet printer
Sample chamber: 20X14X5In (517mmx352mmx150mm)
Machine Dimension: 26X19X21In (648mmx490mmx544mm)
|
|
kajaaniALKALi™ Alkali Analyzer
The kajaaniALKALi™ Alkali Analyzer is an automatic titrator system that provides accurate and repeatable analysis of green, causticized and white liquor for optimizing alkali dosage to the digester. The kajaaniALKALi measures the absolute values of Sodium Hydroxide, Sodium Sulfide, and Sodium Carbonate, and calculates Effective Alkali (EA), Active Alkali (AA), Total Titratable Alkali (TTA), Causticizing Degree (CE%), and Sulfidity (S%).
|
|
Powerful tool for improving laser-via-hole as well as drilled-hole PWB processes.
To 100% inspection of drilled-hole enabled by high-speed inspection
|
|
Accuracy remained and shortened inspection time sharply. (HS)
Powerful tool for improving laser-via-hole as well as drilled-hole PWB processes. (HA/HT)
|
|
APPLICATION
Coating Thickness Analyzer is a tool for precise and accurate XRF measurement of various metallic and non-metallic coatings thickness (anticorrosive, insulating, antioxidizing, waterproof, pipe coating, etc.). Base/coating components are elements from Mg to U. System is applicable for control and monitoring of industrial processes.
FEATURES
- Automatic choice of coating thickness evaluation method for optimization of relative error of measurements,
- Remote control of analyzer electronics and software by ETHERNET interface from Workstation Device and communications with OPC server,
very simple and convenient operation and service,
- Possibility to install the measurement block under and above the measured material,
- built-in industrial computer.
For additional information, please contact us: XRF@bruker-baltic.lv
|
|
|
|
|
|
Years of development and attention to customer needs have made Thermo Scientific Niton alloy analyzers the first choice in XRF technology, bringing lab-quality elemental analysis wherever it is needed in a field-hardened package. Now, in addition to superior positive grade identification and composition analysis of alloy/metal coatings and substrates, the Niton® XL3t offers the benefit of our coating thickness/coating weight measurement technology - providing an "out-of-the-box" nondestructive solution for gauging the effectiveness of coating and plating systems.
Fast and easy-to-use, the Niton XL3t 800 not only performs at line and plating bath solution analysis, but provides more accurate measurements than non-XRF technologies such as eddy current, magnetic induction, and Beta backscatter. You get precise, nondestructive multilayer coating thickness results in seconds. Testing at the plating line both increases productivity and improves process efficiency - no more over-coating or under-coating. What's more, the Niton XL3t is your answer to measuring large or irregularly shaped samples, as well as small-diameter wiring or tubing. Cutting samples for benchtop analysis are a thing of the past.
Typical applications are:
-Galvanized zinc over steel
-Zinc or zinc alloy over steel
-Hard chrome over steel
-Electroless nickel over steel
-Chrome/nickel/copper over steel, Zamak™ or plastic
-DACROMET™ coating over steel
|
|
| ... products without technical information |
| |
|
|
|
|
The Electrokinetic Analyzer for Solid Surface Analysis SurPASS
Use the SurPASS electrokinetic analyzer to investigate the zeta potential of macroscopic solids based on the streaming potential and streaming current method. The zeta potential is related to the surface charge at a solid/liquid interface and is a powerful indicator for the surface chemistry (pH titration) and liquid phase adsorption processes. The SurPASS helps you to understand and improve surface properties and to develop new specialized materials.
An indispensable contribution to solid surface analysis
* High sensitivity for detecting small changes in the surface properties
* Easy access to information on surface charge and related properties
From tiny particles to large wafers
* Different measuring cells for flexible sample mounting
* Cylindrical Cell for powders (min. particle size 25 µm) and fibers
* Clamping Cell for non-destructive measurement of planar solids
* Adjustable Gap Cell for small samples (20 mm x 10 mm)
Save time, reduce downtime
* Quick exchange of measuring cells
* Update of measured parameters every second
* Intuitive software with well-known Microsoft Windows® features
Fully automated measurements
* Automated measuring procedures requiring little manual interaction
* Integrated titration unit gives you fully automated adjustment of pH and additive concentration
|
|
|
|
|
|
Micromeritics' ASAP 2050 Xtended Pressure Sorption Analyzer (xPSA) is an easy-to-use instrument capable of collecting adsorption data in an elevated-pressure environment. The instrument is designed to characterize zeolites and novel new materials such as metal organic frameworks (MOF) and other crystalline materials used in PSA processes. Rapidly obtained isotherms using a wide range of gases and the heat of adsorption are routinely determined from this characterization.
The ASAP 2050 analysis manifold is equipped with a pressure transducer capable of operating from vacuum to 10 atmospheres. The instrument may be used with a large variety of gases including: methane, ethane, ethylene, propane, propylene, butane, carbon dioxide, carbon monoxide, nitrogen, oxygen, argon, and nitrous oxide. Retaining many design elements of Micromeritics’ popular ASAP 2020, the ASAP 2050 includes two independent vacuum systems that allow simultaneous preparation of two samples and analysis of another. Sample preparation and analysis can occur concurrently without interruption and without the risk of cross-contamination.
In addition to controlling the instrument’s operation, powerful Windows® software also reduces the raw data collected during the analysis. An interactive reporting system includes an extremely versatile graphic user interface for custom presentation of results. The standard ASAP 2050 system offers a wide variety of reports, including DFT (Density Functional Theory), BET surface area, pore size distributions, and isotherm cycling.
|
|
|
|
|
|
Micromeritics’ low cost Gemini VII 2390 Series surface area analyzers utilize a patented twin-tube design to produce fast, accurate, and repeatable surface area and porosity results. An ideal tool for teaching, research, and quality control environments, the Gemini VII permits low to high surface area measurements without requiring exotic gases such as argon or krypton.
Three model options are available. The Gemini VII 2390a provides standard methods for: single-point and multipoint BET and Langmuir surface areas, total pore volume, micropore analysis by the t-method, and much more. The Gemini VII 2390p provides additional precision with the addition of a saturation pressure tube and is designed to provide a rapid measurement of the adsorption isotherm. The Gemini VII 2390t has all the capability of the 2390p with the additional ability to perform a BJH or Dollimore-Heal pore size distribution using both adsorption and desorption isotherms of up to 1000 points.
All models can be operated stand alone or connected to a computer running Micromeritics’ Gemini VII Windows® software. The Windows version includes easy-to-follow installation videos and system verification tests to ensure optimum performance and reliability. How-to videos provide on-screen instruction on instrument operation.
|
|
|
|
|
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process Control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models.
|
|
| ... products without technical information |
| |
|
|
|
|
General description :
With features as a 0.1 mm entrance slit and 1 eV pass energy the R4000WAL-0.1 spectrometer claims the best energy resolution on the market. This wide angle acceptance analyzer is fully equipped for XPS, UPS, and ARPES studies with lens tables for overview and high resolution angular and transmission modes. Kinetic energies from 0.5 eV - 1500 eV are measured with a selection of slits and wide range of pass energies from 1-200.
Specifications:
- Energy resolution: < 1.8 meV FWHM at 2 eV pass energy and 20 eV kinetic energy
- Pass energies: 1, 2, 5, 10, 20, 25, 50, 100 and 200 eV
- Transmission mode lens acceptance: +/- 19 degrees
- Angular modes: ± 3.5°, ± 7°, ± 15°,
- Angular resolution < 0.1 degree from <0.1 mm sample
- Kinetic energy range: 0.5 eV - 1500 eV
- Working distance: 34 mm
- 40 mm diameter MCP detector system
- Bakeable to 150 degrees C
Included:
- Scienta R4000 ARPES mechanics and electronics
- Computer system
- Windows based acquisition software: SES (analyzer control software)
- Extremely stable and low noise electronics
- Strictly non-magnetic materials used in the interior
- Fix mode
- Swept mode
- Angular mode
|
|
|
The CMA 100 combines a compact design and high performance. It mounts to a standard NW 100 CF (6" OD) flange, and features a unique integral retraction mechanism for easy access to the sample. Analogue as well as pulse counting mode detection is possible, providing optimum signals even with delicate samples.
|
|
First launched in 1994, the SX 100 is the latest generation CAMECA EPMA instrument. The central concept is a fully digitized instrument with highly integrated electronics and full automation for unattended analysis and evaluation. Comfort and ease of control are made possible by the dedicated keyboard together with the ergonomic software interface.
The tradition of superb analytical performances, based on the famous precision and reliability of the CAMECA WDS analyzers and extreme stability of the primary beam, has been continued. An uninterrupted development program has led to the introduction of new features.
Major applications are found in: geochemistry, mineralogy, geochronology, physical metallurgy, nuclear metallurgy, materials science including glass, ceramics, superconductors, cements, microelectronics, biochemistry, ...
|
|
Features:
Miniature Lens Design
Variable Beam Diameter
Variable Beam Energy
Low Outgassing Rate
Flexible Mounting Configuration
|
|
| ... products without technical information |
| |
|
|
|
|
The multi EA 4000 introduces a new generation of elemental analyzers for determining C, S and Cl in solid samples. Simple and straightforward determinations - TS, TC, TX, TOC, TIC, EC and AOC parameters in inorganic and organic solids.
It is versatile, reliable and easy to operate, yet offers real macro elemental analysis. Sample weights up to 3 g can be analyzed with ease using the multi EA 4000 – no laborious sample homogenization is necessary.
The High Temperature Ceramic technology is extremely robust and needs no catalyst; it’s easy to run precise analyses, even with aggressive and corrosive samples at high temperatures!
The special wide-range NDIR detector allows the simultaneous detection of carbon and sulfur over a broad, dynamic measuring range, all the way from ppm up to percent.
Elemental carbon or decomposable organic carbon determinations are also easy with the multi EA 4000.
A broad-range coulometer with a patented combination electrode is available for chlorine analyses across a wide range.
A large-capacity is optionally achieved thanks to a fully automated solid sampler which transfers the sample boats to the combustion furnace to get automated C, S and Cl analyses with amazingly high sample throughput. The sampler is also optimized for automated TOC determination.
The multi EA 4000 gives you fully automated determination of TOC and TIC samples, with autosampler control in a single analysis cycle.
- Highly convenient operation
- Unique application diversity
- Intuitive software navigation
- Preset standard methods
- Minimal maintenance requirement
- Self-Check-System
- Low operating costs
|
|
FTIR Laboratory Spectrometer
Step up to the new MB3000 FTIR spectrometer from ABB.
It is the most reliable FTIR system in the market with the lowest cost of ownership. Combined with the intuitive Horizon MBTM FTIR software, the MB3000 will facilitate acquisition, processing and analysis of samples.
Easy to use and maintenance free, it will provide constant analysis results for years to come. The MB3000 offers ease of use, reliability and constant results in order to address the concerns of lab users.
|
|
Features:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols)
|
|
A multi-point, multi-stream FTIR analyzer. Designed for remote, real-time monitoring of continuous and batch processes. Our spectrometers provides information needed for process optimization in the refining, chemical, pharmaceutical, food, semiconductor and other industries.
Real-time monitoring of chemical composition and physical properties is key to providing tight control of industrial processes.
- Higher yields
- Higher throughput
- Improved quality or your analysis
- Near-infrared (NIR) portion of the electromagnetic spectrum (800 to 2500 nm)
- Quantitative analysis of organic compounds
- Quantitative analysis of inorganic aqueous solutions and salts.
- Flexible Siting
- Flexible Sampling
- Flexible Multi-detector module
- Flexible communication
|
|
PONSEL ACTEON 2052 Turbidity
Online analyser to measure the turbidity
Range : 0 - 200 NTU - 0 - 2000 NTU
Simplicity – Easy to use :
-Large graphic screen
-Intuitive menus
-2 relays
-2 4 - 20 mA
IR optical sensor:
Robust
For hash water (wastewater,…)
In pipe or in tank installation
|
|
|
ATI’s Model A15/76 Turbidity Monitor is designed to meet the needs of both municipal drinking water systems and industrial water treatment for reliable, low-range turbidity measurement. The turbidity sensor is available with either a White Light Source for EPA Method 180.1 compliance monitoring, or an infrared light source for non-reporting applications.
|
|
This checker can be used for continuous monitoring of the water turbidity (TC-100/500/3000) and suspended solids (TCS-1000) .
Analogue output (4-20mA) allows you to use this checker with various equipments.
Wiper for easy maintenance
Original wiper certainly keeps lenses clean.
Stain of lenses need to be checked only once a month.
Compact size
Simple cylindrical design in compact size approx ¢32 x 170mm (1.26 x 6.69 inch).
Requires small space to set up the unit.
High durability
Durable stainless steel has been used for the sensor casing.
Stainless steel = 18-15-2.5 Cr-Ni-Mo low C stainless steel
Lenses are made of hard-to-scratch sapphire glass.
|
|
Orion AQ4500 Turbidimeter
The Orion AQ4500 Turbidimeter offers advanced features not available on any other benchtop or portable turbidimeter. The dual source turbidimeter allows the user to quickly and efficiently measure turbidity in the units of their choice.
Product Detail
Data log capacity of up to 100 data points
Dual source to comply with EPA 180.1 and ISO 7027
Nephelometric and Ratiometric measurements with autoranging
IP67 waterproof portable turbidity meter
Readings in the range of 0 - 1000 NTU with a choice of units: NT, FTU, FNU, ASBC or EBC
Includes turbidity standards kit, rugged carrying case and replacement cuvettes
|
|
|
|
see the results for the following category : 
