|
|
|
The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies.
|
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
|
Powerful digital and analog capabilities make the FaultFinder system a leading PCB fault analysis and diagnostic system. With rapid and excellent return on investment the FaultFinder is ideally suited to PCB repair and failure analysis environments. Having 152 test channels dedicated to synchronised active driver cards. Analog Network Signatures, and Digital Guards, the FaultFinder provides extensive circuit analysis capability without the need for test fixturing. Further flexibility is provided by the optional 1149.1 compliant XJTAG Boundary Scan software.
|
|
The brand platform
The brand platform defines the basic principles of the Baumer brand:
• the far-reaching conviction which drives us
• the clear assignment within which we pursue our objectives
• the concrete brand values which define the characteristics of our
brand in the long run
• the themes we communicate to underline our brand in the near
and distant future
The brand platform – consisting of conviction, assignment, brand
values and communicated message – is the foundation of all aspects
of the brand propagation. It serves therefore as the basis of all activi-
ties surrounding the Baumer brand: equally for the visual presentation,
communication and the conduct of employees.
|
|
DE-F SERIES
Mask-less, New Matrix Beam scan method Suitable for general PWB process with excellent cost-performance
|
|
The two twin-channel PME modules (MP85 and MP85DP) from HBM provide the optimum solution for monitoring press-fit and assembly operations.
Almost any commercially available transducer can be connected to the amplifiers which operate synchronously and in parallel. The industrial design and the standardized CANopen and Profibus DP interfaces, or digital I/Os alternatively ensure optimum connectivity to the automation environment.
Features and benefits:
Twin-channel amplifier
Comfortable integration into automation system via field bus interfaces
Intelligent signal conditioning and powerful algorithms for monitoring of the fitting process
Results can be saved directly in SPC format
Industrial design.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
TM Robotics offer a series of SCARA robots from the TH-250 through to the SR-1504. All have unique handling capabilities for varying workloads. The SCARA range can offer robots with arm lengths of 250mm to 1500mm, and workload capacitys from 3kg to 70kg.
Perhaps the most innovative of the Toshiba Machine SCARAs are the TH-250 and TH-350, which provide better accuracy and repeatability than comparable SCARA's, and offer quicker cycle times and faster motion. These new SCARA’s are so precise that they can even be used to good effect in the electronics industry. The TH-250 and TH-350 feature payloads of up to 3kg and repeatability of ?0.01mm. These robots are suited to applications in the handling of small components, such as electrical, mobile phone and camera parts, assembly and test equipment. Other applications that demand similar accuracy are hard disk drive assembly, as well as very high precision work, such as optical lens grinding and watch assembly. Furthermore, the TH-250 and TH-350 allow the user to place electronic components on PCB boards, or even handle the optical ‘pick up’ lenses used in CD and DVD disc drives.
|
|
1) Speed the nipple assembly into bicycle rim or motorcycle rim
up to 350 sets of 8 hours.
2) This machine could apply for differecen depth of double wall of
rim by changing the screwdriver set from 0~30mm.
3) CE certificated by SGS.
4) 220V; 50/60Hz, Single phase.
5) There are different models for 9G, 10G, 11G, 12G, 13G, 14G,
respectively.
|
|
The tank and the blade are out of stainless steel.
The depth and the beat of the blade adapt automatically to the level of filling, in order not to brew the components unnecessarily. Good resistance to clogging.
Ideal for the coated components, painted, or of which surface treatment polluting east.
High rates. (For example 5000 parts/hour for a screw M4x30.) Capacity ZSE 151: 1,5l.
Possibility of adding a hopper great capacity.
Mechanical selector Weber.
System in advance on rail without silentblocs. Balanced linear rail: few transmitted vibrations, low noise level.
The system makes it possible to distribute components without head. Management integrated for distribution alone, or distribution and unit of screwing (of installation).
|
|
|
The LAYING can be carried out with or without efforts of installation and thus allows the automatic installation of the rivets, the axes, the pins and the pawns with a control of effort so necessary. One can notice that its design is close to that of the screw drivers.
|
|
| ... products without technical information |
| |
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry.
|
|
TS 1 Transfer System. Precision Assembly and Fast Processes.
The Rexroth TS 1 transfer system is the one to choose if smaller products or assemblies need to be produced.
It has been especially designed for the precise assembly of more demanding products.
One of the strengths of the TS 1 is that it can be integrated into the pre- or part assembly stage of a larger system.
The TS 1 meets the same high standards of quality as all the Rexroth transfer systems i.e. long service life, sturdiness and easy maintenance.
Selected TS 1 units
Small products and exact procedures need to be positioned and reproduced precisely, and this is exactly the right task for the TS 1 position unit.
Different types of workpiece pallets in either plastic or stainless steel complete the range of precise units offered by Bosch.
Application examples
The TS 1 is, for example, used in the fields of medicine technology (hearing aids, pacemakers), electronics (hard disk drives, regulators, sensors), precision mechanics (small motors, switches) and optics (contact lenses).
|
|
| ... products without technical information |
| |
Universal 3D casting work and Schweißtisch
– Diagonal ripping, ensures highest bend and torsional rigidity
– the special choice of the material makes the table insensitive
against pearls and dirt
– the employment of high-quality casting makes a high table load possible
– best extension possibilities offer in the standard table already
appropriate mounting options on the table lower surface
for different feet, connecting framework, shears lifting platform or
Manipulators
– by the hole scanning system 100 mm 100 mm as grid square is it in all five
Directions modular over the entire length, width and height expandable
– by hole rasters, raster lines and completely integrated fine scaling also
Very fast and exactly reproducible leave themselves oh designation
Tighteners develop
– fine-adjustable pendulum feet
– by most modern manufacturing methods (multi-side's treatment) highest quality
|
|
| ... products without technical information |
| |
Details
Products: Meters
Parameters: pH ORP
K100 W PR
Art.-No.: 105000K
User-friendly controller for pH/ORP, wall-mounting enclosure
Series:K100
Delivery time: 2 days
|
|
WALL MOUNTING INSTRUMENTS
with one "ON or OFF" threshold and one output function 4 - 20 mA :
- pHM 200 : pH meter
- CM200 : conductivity-meter
- OXYM200 : oxymeter
- CLM200 : chlorometer
|
|
Details
Products: Meters
Parameters: pH ORP
K100 W PR
Art.-No.: 105000K
User-friendly controller for pH/ORP, wall-mounting enclosure
Series:K100
Delivery time: 2 days
|
|
WALL MOUNTING INSTRUMENTS
with one "ON or OFF" threshold and one output function 4 - 20 mA :
- pHM 200 : pH meter
- CM200 : conductivity-meter
- OXYM200 : oxymeter
- CLM200 : chlorometer
|
|
Air Logic manufactures a comprehensive line of nylon and polypropylene plastic fittings; the polypropylene fittings ar more chemically resistant than our standard nylon fittings. Polypropylene also provides more dimensional stability.
The fittings include Barbed Crosses, Elbows, Tees, and Unions. Barbs are available for 1/16", 1/8", or .170" I.D. tubing. The nylon fittings can be provided in black or white; the polypropylene fittings are gray.
|
|
|
