|
|
BT601 is a versatile Cable scan (diagnostic) & Wire Finder (tracing) tool, designed for cable/network system installation and network technician to diagnostic network problem.
Wire finding is BT601 major unique function where other cable checkers do not have, it can locate up to 3000m long wire/cable even in a complex PC network or telephone system.
BT601 also built-in LAN cable mapping function, to quickly diagnostic LAN cable condition and identify fault point.
Bright white LED torch and External Earphone support is BT601's value added function to enable service technician to work conveniently and comfortably in dark and noisy environment.
|
|
|
|
|
|
DIGICAT 100 Buried Service Locator
The DIGICAT 100 can be used to find live (energised) power cables, trace buried metal services which reradiate signals. The highly visible digital LED display makes a swift service location possible.
DIGICAT 200 Buried Service Locator
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.
DIGICAT 200 GIS Buried Service Locator
The DIGICAT200 GIS offers all the functions of the DIGICAT 200 with additional wireless connectivity. Compatible with a wide range of field proven hardware platforms and combined with simple interfacing with a variety of industry standard GIS software.
The DIGICAT 200 GIS is an ideal solution for systems integrators seeking to integrate buried service locating with GIS and survey mapping processes, using industry standard wireless connectivity. The advanced data output format provides system integrators with the opportunity to further develop innovative data capture and operational management solutions to meet new market opportunities.
|
|
Weigh Modules and Force Transducers
* High accuracy
* Superior installation properties
* Withstands up to 100% side load
* For hard environmental conditions (IP67)
* Covers most applications
|
|
Newly Enhanced Sensitivity
for tough to locate pipes and cables
- Single-handed operation
- 2 buttons, 2 knobs (too easy)
- Change frequencies from the receiver
|
|
|
As with our magnetic locators, Schonstedt pipe & cable locators are designed to withstand the rigors of daily on-site usage and a wide range of environmental conditions. Our “P&C” line is quickly becoming the professional's choice for locating pipe and cable, but you don't have to be a pro to use these instruments. So even if you only have an occasional need to find pipe and cable underground, keep a Schonstedt in your kit.
|
|
| ... products without technical information |
| |
Schleuniger offers several solutions for marking, printing and labeling of wires and cables. From hotstamp marking to inkjet printing and thermal transfer printing - all integrated in automatic production lines with Schleuniger's automatic wire cutting and stripping machines.
With the PC software Cayman, all printing parameters are programmed directly in the same software where the settings of your cut & strip machine are made. Schleuniger has also implemented various customized solutions with several inkjet printers in one production line or printing with different colors on both sides of the cable / wire.
|
|
MK3
- Cable, wire and component marking system X-CARD for more efficient and versatile marking on site.
- Prints various marker tags on credit card type format (Partex type PFC) accomodating also project and mounting information directly on the card.
- Project and mounting information directly on the card gives lower marking costs.
- Printing on site with PC controlled thermotransfer printer.
PFC
- Fast mounting with easy breakoff cards with precut or moulded marker tags.
- Easily detachable tags are put directly into PARTEX various tag holder systems.
- The hard tags can be rapidly mounted, before or after connecting the wires and cables.
- Easily printable in the X-Card MK3 printing machine with high production rate.
|
|
MK9 ProMark
- Compact, portable, ID printer for cable, wire and component marking on site.
- Feeds, prints and cuts bulk Partex profiles and self adhesive labels from internal cassettes.
- Stores or imports files from a compact flash memory card (option).
- ProMark is a very cost effective identification system for use in panel buildning and electrical installations.
|
|
SP2000
- Compact heavy duty machine for high demand production of wire, cable and component marking.
- PC link connection or stand alone mode with an optional standard keyboard.
- Printing of large diameter sleeves and tubes ranking up to 28 mm OD or 45 mm flattened.
- Inproved mechanism for quality printing on hardened tubes in low temperature environment.
- Sleeves can be completely or partly cut off.
|
|
ENGINE:
* Cummins 6BTA5.9 (200 HP)
POWER TRAIN:
* Transmission Franklin P6-410, 6 speed powershift
* Torque Converter Clark 13.7 Inch
* Axles Franklin F-345 Heavy Duty Planetary
* Differentials Lock-In/Lock-Out Front, No-Spin Rear
* Brakes, Service Enclosed multi-disc wet brake
* Brakes, Parking Spring applied, hydraulic released
|
|
ENGINE: Cummins 6BTA5.9 (185 HP) POWER TRAIN
POWER TRAIN:
* Transmission: Franklin P4-385, 4 speed powershift
* Torque Converter: Clark 13.7 Inch
* Axles: Franklin F-320 Heavy Duty Planetary
* Differentials: Lock-In/Lock-Out Front, No-Spin Rear
* Brakes, Service: Enclosed multi-disc wet brake
* Brakes, Parking: Spring applied, hydraulic released
|
|
ENGINE: Cummins 6BT5.9 (174HP)
POWERTRAIN:
* Transmission Franklin P4-385, 4 speed powershift
* Torque Converter 13.7 Inch
* Axles: Standard - Franklin F-240 Heavy Duty Planetary, Optional - Franklin F-257 Heavy Duty Planetary
* Differentials: Lock-In/Lock-Out Front and rear
* Brakes, Service Enclosed multi-disc wet brake
* Brakes, Parking Spring applied, Hydraulic released
|
|
| ... products without technical information |
| |
Cable seal with progressive tighteninig
Description :
Resistance : diametre : 1,6 = 412Kgs - 2,4 = 850Kgs
Material :
Head : Zinc
Cable : Galvanized metal
Characteristics :
Consecutive numbers
Free marking from 500 pieces
Marking of 6 digits and 3 letters maximum
Cable length : 300mm
Diameter : 3.2mm, 2.4mm, 1.6mm
Options:
Colored Head
Laser marking and barecode
Cable length up to 2000mm
Delivery time:
Neutral model: available on stock
Personalized model: about 10 weeks
Customs tariff: 83 09 90 90
|
|
| ... products without technical information |
| |
For outdoor and indoor applications
Available in Diesel or LPG
Basic capacities from 12000 kg to 25000 kg
|
|
| ... products without technical information |
| |
Widely used in bridge, tank and structural steel work, ship building and other industry where powerful, all-position mechanical jacks are required.
|
|
Carrying capacity 2000 kg.
This Cable Jack is suitable for cable drum diameters of 400- 2000 mm and a drum width of 1400 mm.
By means of 3 supporting wheels which are height adjustable by hand cranks the device can be easily moved without drum.
|
|
The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular equipment and GPS equipment against lightning surges and electrical transients. They are a first line of defense for your sensitive equipment.
The CXP series has been designed to protect radio base communication systems from lightning and electrical transients. This device is a DC blocked protector not to be used where transmitter combining is performed.
|
|
|
Pasternack's Coaxial Surge Protectors provide protection for your RF & Microwave coax applications from lightning or other high voltage surges.
|
|
|
|
|
|
BinMaster’s SmartBob2 weight and cable inventory management system is designed for powder and bulk solids measurement in bins and storage silos up to 180 feet tall. Consisting of SmartBob sensors, control consoles and Windows-based eBob reporting software, BinMaster provides an automated wired or wireless inventory monitoring and reporting solution for the grain, seed, feed, cement, coal, aggregates, food, chemical, pharmaceutical and plastics industries. SmartBob is ideal for any location where ongoing inventory management and remote reporting is required for just one bin or a network of up to 120 small and large bins.
Measurement devices include the SmartBob2 remote for bins or silos up to 180 feet tall including a high temperature model to operate in extreme conditions from 240 to 500 degrees Fahrenheit, plus the SmartBob-TS1 for smaller bins up to 40 feet tall. SmartBob2 can be uniquely configured using a variety of probe designs and extensions for solid, slurry, and liquid applications. Long-lasting, hassle-free service is ensured by SmartBob’s unsurpassed cable cleaning system.
SmartBob2 is extremely rugged, featuring the industry’s strongest cable and motor design which is completely sealed in a strong, lightweight molded polycarbonate enclosure which is explosion proof and rated for Class II, Groups E, F & G certifications. Requiring no field calibration, SmartBob2 is easy to install, needs minimal wiring, or can be used with the SmartBob wireless transceiver. SmartBob2 provides enhanced surge / transient protection for the RS-485 port for protection against power surges or indirect lightning strikes on tall silos.
|
|
| ... products without technical information |
| |
|
Stroke is contained within the cylinder itself for space saving advantage. Allows force to be applied in both directions. Single acting, double acting, double purchase and track models available. Wide range for bore sizes and options
|
|
|
|
|
|
Cable Burster, EXTRACTOR
The TERRA-EXTRACTOR X 400 is a cable burster (wire burster) which replaces old pipes from 1 1/2“ (ID 40 mm) up to 10“ (ID 250 mm). Lengths up to 150 m are possible. Old pipe from cast iron, steel, clayware or PE/PVC can be replaced. New HDPE pipes with outer diameters of 63 – 250 mm are pulled in. The TERRA-EXTRACTOR X 400 is operated via an electric remote control. No operator has to be in the pit or in the manhole during operation. An integrated electric control box changes the direction of the hydraulic cylinder.
The standard version of the TERRA-EXTRACTOR X 400 requires a working pit, which is only 1.70 m long and 1.00 m wide. In spite of this small working pit, the X 400 pulls the bursting tools and the new pipe into its front box and into the working pit, after the pipe renewal job has been finished. This is fast and efficient.
The TERRA-EXTRACTOR X 400 operates at speeds up to 145 m/h. It is equipped with a pulling force of 400 kN (40 tons) which adapts itself automatically to the real working conditions. The TERRA-EXTRACTOR X 400 is powered by a supersilent Diesel power pack which has been designed exactly for this wire burster. As an option remote pressure control is available.
|
|
The THALER-Cable Blowing System "FIBERJET" is used for blowingin
cables of diameter range 10-20 mm in HDPE-pipes of different
sizes. Cable lengths of up to 4000 m can be blown-in at a speed of
up to 100 m/min. The blown-in length is depending on the inner diameter
of the pipe, the cable diameter, the weight of the cable, the
friction factor between cable and pipe as well as on the available air
pressure. Furthermore the possible length is depending on the quality
of the pipe laying (curve radius, deformations).
|
|
... see all the products in the category
Blowers
|
Cable Fixing in the Automotive Industry with new adhesive tape system
Lohmann´s patented Duplocoll® CF technology makes it possible for cables to be fixed and simultaneously covered by means of one-step process of self-adhesion. The new product line offers a lot of advantages for the automotive industry. It speeds up manufacturing processes and reduce cycle times and production costs. However challenging the bonding task, the Duplocoll® CF – system will secure on-board motor vehicle electrics tightly in place.
|
|
|
|
see the results for the following category : 
