|
|
|
|
|
|
DeFelsko, a U.S. manufacturer of coating thickness gages and inspection instruments, offers a variety of instruments designed specifically to meet the paint industry’s requirements.
The popular PosiTector® 6000 Coating Thickness Gage has new tougher, smarter features. Still simple, durable and accurate, the American made PosiTector® 6000 retains all of its simplicity and functionality for measuring coatings on all metals.
Tough new features include large impact-resistant Lexan® display, IP5X ingress protection and protective rubber holster. As always, tough probes, robust housing and a strong warranty make the PosiTector® 6000 the right choice for coating applicators, inspectors, platers, anodizers and more. A wide range of probes are available for a variety of applications.
DeFelsko’s revolutionary PosiTector® 200 Series gages measure coatings on non-metals such as wood, concrete, fiberglass and more. Specifically designed to measure coatings including paint, powder, varnish, etc, the PosiTector 200 is an affordable choice to quickly and accurately check coating thickness.
DeFelsko also offers quality inspection instruments including the Digital PosiTest Adhesion Tester, the NEW PosiTector Dew Point Meter with available Magnetic Surface Temperature Probe Kit (optional) and PosiTector Ultrasonic Thickness Gage with your choice of standard or multiple echo-thru paint gages.
Call DeFelsko at (800) 448-3835 or visit our website at www.defelsko.com to get assistance selecting the optimal instrument for your application or to request brochures of any of our quality gages.
|
|
|
|
|
|
The COULOSCOPE CMS (Coulometric Measuring System) uses the coulometric method for measuring coating thickness. New design features include a large, easy to read LCD display, an intuitive menu-driven operator system, the new V18 measuring stand that allows automatic filling and emptying of the cell by pump control as well as additional SPC capabilities.
The instrument is ideal for measuring the thickness of virtually any metallic coating on a metallic or non-metallic substrate, including multiple coatings. It is used in applications where non-destructive methods cannot or need not be used.
The COULOSCOPE CMS, accurately measures metallic coatings in the range of 0.05 - 40 µm. The unit is capable of storing hundreds of predefined coating/substrate applications from single coatings such as zinc on steel up to triple coatings like chromium on nickel on copper on plastic. Multiple storage memories allow thousands of measurement values to be recorded and saved.
An RS232 interface allows the stored data to be printed or downloaded to a PC.
|
|
CMI900 - For Measurement of Coating Thickness and Material Composition
CMI900 is a cost effective, high performance XRF analyser for measurement of coating thickness and material composition.
- Measure the thickness and/or composition of plating, coating, thin films
from Ti to U
- 5 layers / 15 elements / Common elements correction
- Composition analysis of up to 15 elements simultaneously
- Measurement method according to ISO 3497, ASTM B568 and DIN 50987
Applications:
- Multi-layer Metallic Coating Thickness Measurement
- Alloy Identification and Chemistry Analysis
- Plating solution analysis
- Gold karat assay
|
|
DELTASCOPE FMP10 and FMP30 - ISOSCOPE FM10 and FMP30 - DUALSCOPE FMP20 and FMP30
The FMP hand-held instruments measure coating thicknesses non-distructively with high precision. Magnetic induction (DELTASCOPE), eddy current (ISOSCOPE) or both methods (DUALSCOPE). They are modern, robust and user-friendly an can be adapted to any measuring application using interchangeable probes.
FMP10 and FMP20 are entry level models for professional evaluation of coatings, ideal for repetitive measuring applications.
FMP30 and FMP40 feature additional strategies for measurement capture, more memory and extensive graphical and statistical evaluation capabilities.
With their USB interface all FMP instruments support data communication to PC. The FMP30 and FMP40 are able to send a measuring report directly to a USB-printer.
|
|
DUALSCOPE and ISOSCOPE MP0/MP0R series
Robust, handy and small - the MP0/MP0R-series. For mobile, precise and non-destructive coating thickness measurements using magnetic inductive or eddy current method.
The professional measurement technology from FISCHER in a compact design. With two rectangular placed displays and bright illumination for an outstanding readability. Perfect suited for quick reliable and precise measurements – also under difficult conditions like hardly accessible areas or bad illumination.
In various versions available:
DUALSCOPE MP0: For measurement of coatings on ferrous or non-ferrous materials.
DUALSCOPE MP0R: With additional radio- and USB-interface for data transmission to a PC
DUALSCOPE MP0R-FP: With fixed cable probe, radio- and USB interface
ISOSCOPE MP0R: For measurements only on non-ferrous materials. With radio- and USB interface.
|
|
The DUALSCOPE FMP100 is the most advanced in the FMP-family. A measurement computer which offers an extremely user-friendly operation, a high resolution color touch screen and a Windows CE operating system. The DUALSCOPE FMP100 is a universal solution, using magnetic induction and the eddy current methods.
The FMP100 is ideal for different measurement applications because settings and calibrations can be stored and recalled right on the display.
In addition to extensive evaluation and statistics functions, the FMP100 offers flexible graphical presentations of the measurement data. An Innovative tool for quality control, the FDD-software (Factory Diagnosis Diagram) is integrated.
For various measurement applications in the field of coating thickness a broad range of probes is available. A robust connector with build in intelligence makes it quick and easy to change a probe.
|
|
|
|
|
|
Coating Thickness measurement made easy at any angle!
Oxford Instruments is pleased to announce the launch of its new CMI153 and CMI 250 Coating Thickness gauges developed for the Paint and Powder Coating Industry.
These robust handheld devices combine Eddy Current and Magnetic Induction technology to automatically recognize the base material and instantly switch to the correct mode for measurement over ferrous and non-ferrous substrates.
Easy-to-use, the menu driven CMI153 is a single button factory pre-calibrated unit that delivers excellent accuracy and precision.
The innovative CMI250 offers factory pre-calibration and user created calibration capability, temperature compensation, data storage options, date and time stamp, statistical analysis, USB to PC connectivity, and the added advantage of a rotating flip display screen enabling coating measurements to be read at any angle!
These versatile instruments are ideal thickness measurement solutions for:
•Industrial Coatings
•Appliance Finishing
•Paint & Powder Coating
•Automotive & Aerospace Finishing
•Coating inspectors
•Electroplating or galvanizing
|
|
|
|
|
|
The Sonacoat P is the new paint thickness gauge from Sonatest Ltd -providing fast, accurate, non-destructive coating thickness measurements on steel and non-ferrous materials.
No surface damage, no grinding required.
Fast and easy to use - by simply placing the Sonacoat P on the surface to be tested, an accurate thickness reading is shown on the large display screen. This gauge also automatically selects the optimum measuring method (magnetic induction or eddy current), providing highly accurate readings, even for the thinnest of coatings. No calibration is required.
Find out more about your bodywork!
Ideal for auto dealers, inspections stations, auto paint and body shops the Sonacoat P can also provide the end user with valuable information regarding the coating structure such as paint topcoats or body fillers. When the measured thickness value clearly exceeds the standard paintwork thickness, this would then indicate the use of filler material or repainting.
The speed, simplicity and accuracy of the Sonacoat P make this gauge an invaluable tool for a wide range of inspection tasks.
Sonatest Ltd celebrates it’s 50th Anniversary in 2008 and is part of the Sonatest NDE Group of Companies; the leading independent manufacturer of Ultrasonic Flaw Detectors, X-Ray Equipment, Scanning Systems, Thickness Gauges, Transducers and NDT accessories. Find out more about Sonatest Ltd and our products by visiting www.sonatest.com
|
|
|
|
|
|
Sonacoat Easy II F/FN
Easy to operate menu structure. No calibration necessary. Infrared interface for cable free data transfer. Online statistics software. Measurement memory & Statistic memory. Choice of languages available.
The Sonacoat is designed for fast, practical and accurate non destructive coating thickness measurement. A dual purpose innovative gauge used for measurement on steel and non-ferrous metals with automatic substrate recognition, activating the appropriate measuring procedure. The Sonacoat II-F can be used for all non-ferrous coatings of varnish, paint, enamel, chrome, copper, zinc etc on steel and and iron. This gauge is also suitable both for the laboratory and harsh field conditions. The built-in IP52 safeguards protection against dust and dripping water.
Sonacoat Easy
Ideal for Paint and powder coatings. Paint shops. Automotive and ship building. Verification of zinc coatings under the paintwork.
Two Models available:
Sonacoat Easy F - for steel, with integrated transducer.
Sonacoat Easy FN - for all metals.
�� User-friendly. Switch on and use instantly!
�� Fast and precise measurements.
�� Wide measuring range up to 3,500 ìm.
�� Highly accurate on flat, rough, and curved surfaces.
|
|
Versatile and accurate instrument for measuring the thickness of organic coatings on all base materials such as paints and lacquers on wood, plastics or metal. For measurement, a taper hole is bore into the surface to be measured by microscope (wedge cut principle).
Measuring ranges:
2...200 µm, 3...300 µm, 5...500 µm, 10...1000 µm
|
|
Universal coating thickness gauge working on the coulometic principle to measure virtually all types of electroplated single or multilayer coatings such as chrome, nickel, cadmium, brass, silver, tin and zinc on metal or non-metal substrates.
This technique simply involves the removal of a small, almost invisible area of coating material. The substrate itself is not affected.
More than 70 combinations of coating and substrate can be measured with the standard equipment.
Measuring range: 0,05... 75 µm
Statistical evaluation with display of mean value, standard deviation, coefficient of variation, number of readings, highest and lowest single reading.
|
|
Technical highlights:
– Remote Sensor for easy
acceess to the test point
– Accuracy:
• Standard: 3 % of the
measured value
• Offset-Accur: 1 % of the
measured value
Offset-Accur: This function
allows you to adjust the
instrument precisely on the
locally measured range by a
two-point calibration (base
plate and calibration foils).
This results in a superior
accuracy of approx. 1 % of
the measured value.
Size: L 131 x B 65 x H 28 mm;
Weight: 81 g
Auto-Power-Off function
Selectable measuring units:
metric, imperial
Resolution of TC F and N
models: 0,1 m 100 m
Power supply 4 x 1.5V AAA
Battery
Base plate and calibration foils
included
Data Output to PC
– RS 232C Output included
– Option: Software and cable to
PC: ATC-01: 80,– € net
External sensor for better
access to the test object
(Cable length: 1 m)
External sensors with other
measuring ranges are available
on request
Selectable measuring units:
metric, imperial
Min measuring area: 6 mm
Min base thickness: 0.3 mm
|
|
Technical Highlights:
– External Sensor to access
the test object easily
– Accuracy: 0.5 % of the
measured value + 0.1
Size: L 120 x B 62 x H 30 mm;
Weight: 164 g
External sensor for better
access to the test object (Cable
length: 1 m)
Power supply 4 x 1.5V AAA
Delivered in a
hard carrying
case
Control plate for calibration
included
Data Output to PC
– RS 232C Output included
– Option: Software and cable
to PC
ATD-01: 80,– € net
Selectable measuring units:
mm, inch
Auto-Power-Off Function
Accessories:
– External Sensor 5 MHz ø
6 mm for thin material
probes: Measuring range
(steel) 1.0 – 50.0 mm
ATB-US 01: € 150,– net
– External Sensor 5 MHz ø
12 mm for hot (temperature)
probes: Measuring range
(steel) 1.0 – 225.0 mm at normal
temperatures; 4.0 – 100.0
at operating temperatures up
to 300 °C
ATB-US 02: € 295,– net
|
|
Technical Highlights:
– Accuracy:
• Standard: 3 % of the
measured value
• Offset-Accur: 1 % of
the measured value
– Compact and robust
design for everyday use
Offset-Accur: This function allows you to
adjust the instrument precisely on the locally
measured range by a two-point calibration
(base plate and calibration foils). This results
in a superior accuracy of approx. 1 % of
the measured value.
Size: L 131 x B 65 x H 28 mm;
Weight: 81 g
Minimum measuring area: 6 mm
Minimum base thickness: 0.3 mm
Auto-Power-Off function
Selectable measuring
units: metric, imperial
Power supply 4 x 1.5V AAA
Battery
Base plate and calibration
foils included
Resolution of TC F and N
models: 0,1 m 100 m
Data Output to PC
– RS 232C Output included
– Option: Software and cable
to PC ATC-01: 80,– €
TC 1250-0.1 FN-car
specially designed for the
automobile industry:
– Automatic recognition of
measuring mode (F or N):
„point and shoot“
– Only one button – easy to
operate
– Optional ranges: 200 m –
15000µm
|
|
APPLICATION
Coating Thickness Analyzer is a tool for precise and accurate XRF measurement of various metallic and non-metallic coatings thickness (anticorrosive, insulating, antioxidizing, waterproof, pipe coating, etc.). Base/coating components are elements from Mg to U. System is applicable for control and monitoring of industrial processes.
FEATURES
- Automatic choice of coating thickness evaluation method for optimization of relative error of measurements,
- Remote control of analyzer electronics and software by ETHERNET interface from Workstation Device and communications with OPC server,
very simple and convenient operation and service,
- Possibility to install the measurement block under and above the measured material,
- built-in industrial computer.
For additional information, please contact us: XRF@bruker-baltic.lv
|
|
●Integrated probe FN
●Automatic substrate recognition
●Automatic calculation: Mean/Max/Min/No./S.Dev
●Upper-lower limit setting and sound alarm
●Data output RS232 to printer TA220S or PC
●500 data can be stored
●Measurement modes: continuous/single
●2 shutdown models: Manual/automatic
|
|
Non-destructive measurement of non-magnetic coatings (e.g. paint, zinc) on steel, insulating coatings (e.g. paint, anodising coatings) on non-ferrous metals and non-ferrous metal coatings on insulating substrates.
Four basic gauges with different possibilites of processing of readings
Wide variety of wear resistant probes can be connected
High accuracy and reproducibility
Storage and documentation of readings
99 calibration memories available
Large-sized display with backlight
|
|
Magnetic coating thickness gauge working on the magnetic attraction principle. The sturdy metal housing and a clear glass scale combine to make this gauge a most efficient tool for non-destructive, quick and accurate coating thickness measurement.
Suitable for:
- all non-magnetic coatings, e.g. copper, chrome, paint, enamel, etc. on steel
- electroplated nickel coatings directly applied on steel
Performance features
- Non-wearing permanent magnet
- Measuring without power supply
- No calibration required
- Measurement at any angle
- High accuracy
- Measurement of coatings up to 20 mm
|
|
|
|
|
|
The three models of the MiniTest 700 series offer a flexible solution to all measuring requirements for coating thickness measurements on steel or on non ferrous substrates.
Correct readings with interference free measurement with precise evaluation through SIDSP® (sensor integrated digital signal processing)
Extended field of application through exchangeable sensors to cover different ranges up to 15 mm thickness
High flexibility of use through versatile sensors (MiniTest 740 sensor can be changed from built-in to external sensor on a lead)
Automatic substrate identification with FN sensors accelerates measurements and helps avoiding operating errors
Efficient temperature compensation eliminates errors caused by changes in temperature
High precision characteristic curves achieved during the manufacturing process by calibrating up to 50 calibration points
Large memory capacity for storing up to 100,000 readings in 10 and/or 100 batches
Readings and statistical values can be called-up individually
Large, easy-to read backlit graphics display, with 180° rotatable display orientation
Easy menu-guided operation, 25 menu languages are available
Built-in IrDa port for infrared data transmission to printer or PC
Future-proof through downloadable sensor and gauge software updates
|
|
Non-destructive measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.
Universal probe with auto-mode for measurements on steel and non-ferrous metals
With the Universal Probe (MiniTest 600FN only) and "auto-mode" the probe senses the type of substrate the coating is applied over and automatically switches to either the Magnetic Induction or the Eddy Current principle. Eliminates manual adjustments and ensures that the correct principle is always utilized without having to know the actual type of substrate coated.
Wear-resistant probes of practically unlimited lifetime
|
|
|
|
|
|
Coating Thickness Gauge ( TG-900)
Coating Thickness Gauge
TG-900 Features:
Automatically hold reading, when sensor leaves the surface.
Automatically measure thickness, when you place sensor onto the surface.
2-point calibration.
One hand operaiton- Simple and easy to be used.
Back light display
micro mini/mils user-selective.
Autopower off.
CE-approval
Coating Thickness Gauge TG-900
Model: TG-900
Range 0 to 40.0 mils ( 0 to 1000 micro m)
Resolution 0.1 mils/ 1 micro m
Response time 1 second
Accuracy +/- 4 digits on 0 to 7.8 mils
+/-7 digits on 0 to 199 micro m.
+/-(3% + 4 digits) on 7.9 mils to 40mils(200 micro m to 1000 micro m)
specified at 23 ¡æ +/- 5 ¡æ , <75% relative humidity.
General
Display 3 1/2 digit liquid crystal display (LCD) with a maximum reading of 1999.
Low battery indication the " Battery " symbol is displayed when the battery voltage drops below the operating level.
Operating environment 0 to 50 ¡æ (32 ¨H ~ 122 ¨H) ambient at < 75% relative humidity.
Store temperature 0 to 60 ¡æ (32 ¨H ~ 140 ¨H) ambient , 0to 80% R.H. with battery revoved from meter.
Auto power off 10 seconds
Dimensions 148 mm(H) x 105mm(W) x 42 mm(D)
Accessory Soft carrying bag, Standard thickness plate 3.9 mils (100 micron), 9V battery
|
|
|
|
|
|
Years of development and attention to customer needs have made Thermo Scientific Niton alloy analyzers the first choice in XRF technology, bringing lab-quality elemental analysis wherever it is needed in a field-hardened package. Now, in addition to superior positive grade identification and composition analysis of alloy/metal coatings and substrates, the Niton® XL3t offers the benefit of our coating thickness/coating weight measurement technology - providing an "out-of-the-box" nondestructive solution for gauging the effectiveness of coating and plating systems.
Fast and easy-to-use, the Niton XL3t 800 not only performs at line and plating bath solution analysis, but provides more accurate measurements than non-XRF technologies such as eddy current, magnetic induction, and Beta backscatter. You get precise, nondestructive multilayer coating thickness results in seconds. Testing at the plating line both increases productivity and improves process efficiency - no more over-coating or under-coating. What's more, the Niton XL3t is your answer to measuring large or irregularly shaped samples, as well as small-diameter wiring or tubing. Cutting samples for benchtop analysis are a thing of the past.
Typical applications are:
-Galvanized zinc over steel
-Zinc or zinc alloy over steel
-Hard chrome over steel
-Electroless nickel over steel
-Chrome/nickel/copper over steel, Zamak™ or plastic
-DACROMET™ coating over steel
|
|
Non-destructive measurement of paint, plastic, enamel and other insulating coatings applied on wood, plastic, glass, ceramic and also on metals according to the ultrasonic principle.
Measurement of a multi-layer system in only one measuring process
High accuray and reproducibility
Storage and documentation of measuring values
Measuring range: 10... 500 µm
Memory capacity: max 10,000 readings
|
|
Ultrasonic Thickness Gauges are designed to improve safety and ensure reliability of material subject to corrosion or erosion.
Corrosion gauges with their dual-element transducers are the primary inspection tool used to measure the remaining walls of components such as pipelines, pressure vessels, storage tanks, and numerous other applications..
Precision gauges use single-element transducers to provide the thinnest range and highest degree of accuracy possible. Common applications include metals and a variety of non-metals (i.e. glass, ceramic, plastic, etc.).
We offer a wide variety of instruments and probes to offer the best solution for your specific application.
|
|
Reflectance and thickness measurement systems for laboratory applications
ETA-SST is a system for measurement of spectral reflectance and layer thickness. Its small size and easy-to-use operating software make this system an excellent choice for laboratory applications and small-scale quality control procedures.
Thickness ragnge:
model 380-1050: 0.1 - 20 µm
model 850-1700: 1 - 30 µm
|
|
21PlusTM is the ultimate measurement and control system and the highest performance gauging platform available to the industry. It incorporates the deep experience born of EGS’ CIMLine, Tracerlab, LFE, Soter and System 21 heritage and embeds it in a wholly new electronic package.
|
|
Coating Thickness Gauge PAINT BORER 518 S
For film thickness measurements using the wedge cut technique. Combines the advantages of P.I.G. 455 with greater ease of operation: a conical bore of defined angle is made in the coating. Measuring microscope, easily and accurately focused over the cut out. Minimum specimen damage allows a large number of test points. Specimen table for extremely small specimens (dia. 10 mm) available as accessory. Due to the mobility of the microscope into two directional axes (turned by 90° from one another) with the possibility of turning the scale, the PAINT BORER 518 S is especially suitable for the evaluation of elliptical holes that arise with curved specimens.
|
|
Coating Thickness Gauge, Paint Inspection Gauge P.I.G. 455
A successful instrument using the standardised wedge cut method. Indispensable for film thickness measurement on any substrate. In the case of multi layer coatings complete and individual layer thikkness can be measured.
Measuring ranges:
200/500/1000/2000 ìm
Also for adhesion tests in accordance with AS 1580 (method 408.1).
|
|
The byko-test 1200 is an affordable and accurate gage for measuring coatings applied to ferrous substrates, such as steel structures - the electronic banana gage.
- Used for measurements over ferrous substrates
- Simply place the instrument, push down and read
- Probe is built into the instrument - no cables or plugs
- byko-test 1200 an easy-to-use model only for ferrous
The unique design and duplex LCD display allow for measurements to be taken in areas that other integral probe gages are unable to reach. Readings may be automatically converted from mils to microns. Perform a zero point calibration either with the included zero test plate or on the test substrate.
|
|
|
|
|
|
Testing performance is both non-destructive and extremely accurate.
With this state of the art thickness gauge, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with 1 auto-detect external probe.
Main Technical Data
• Measuring range: 0-2000 µ m max. or 0-80 mils
• Resolution: 0.1µ m / 0.01mils(0-99µ m) or 1µ m (over 100µ m)
• Guaranteed tolerance:
After one-point calibration: +/- 1-3%n or 2µ m (whichever is greater)
• Display: 4 digits (digit height = 10mm/0.4”)
• Min. measuring area: 0.2” x 0.2” (5mm x 5mm)
• Min. radius of curvature: Convex: 0.12” (3mm)
Concave: 1.2” (30mm)
• Min. substrate thickness: Ferrous: 20 mils (0.5mm)
Non-ferrous: 2 mils (50 µ m)
• Calibration: Zero Calibration
Foil calibration
• Max. Surface temperature of test object: 302 degrees F (contact time max is 2 seconds)
• Power source: 4 AA batteries
• Dimensions: 161 x 69 x 32mm
• Weight: 9oz. (260g)
|
|
|
|
