|
|
The POROSCOPE HV20(D) is used to detect pores and pinholes in electrically non-conductive protective coatings on metal or concrete using the High Voltage Method according to ISO 2746, ISO 8289 and DIN 28055.
Applications
- Pore testing in containers, oil tanks, agitator vessels, pipes, boilers, etc., lined with enamel or plastic
- on building seals, made of non-conductive coatings
- in the construction industry.
|
|
|
|
|
|
Building on the new range of Digital Ultrasonic Flaw Detectors recently launched by Sonatest Ltd, the new Railscan 125 has been developed specifically for use in rail testing market and is walking stick compatible.
Developed using cutting edge technologies the new Railscan 125 has been developed with the user and application environment in mind, meeting the Network Rail standard NR/SP/TRK/005 for Rail Testing Portable Ultrasonic Equipment.
Rugged, waterproof construction combined with superior battery life render this unit as being ideally designed for rail testing applications and harsh working environments. The transflective colour display is daylight viewable and now supports a larger display area, which is expandable for full screen viewing.
Software development has resulted in a new user orientated menu navigation system, broken down into four key areas: calibration, measurement, utilities and memory. The subtly redesigned user interface allows for faster parameter changes, providing unique Help keys for all functions and above all ease of use.
With improved overall performance, more robust casing and advanced software features the results will speak for themselves.
|
|
For over 20 years the Masterscan name has meant exceptional performance with class leading design, and the 350M and 380M continue this tradition. The latest developments in amplifier and pulser technology deliver higher levels of near surface resolution, penetrating power and excellent signal to noise ratio. Typical applications are thin walled components, turbine blades, spot
welds, power generation (including EMATs), large castings and forgings.
|
|
|
The Sitescan delivers high performance and advanced features, yet our engineer's experience in user interface design has ensured it is easy and quick to use. The acknowledged ease of use of previous generation Sitescans has been enhanced with the menu navigation scroll-wheel, providing easy access to functions. The menu structure has been designed to guide the user through their task with operation quickly becoming second nature. The Sitescan D-10 uses a broad band amplifier compatible with a wide range of transducers whilst the D-20 model uses several narrow bands for improved performance. The analogue feel from the high quality broadband amplifier shows all the detail required to identify defect types such as holes or cracks, and sufficient resolution for identifying small signals. Typical applications are weld inspection, corrosion testing, small castings, forgings and delamination checking.
|
|
Holiday detector for detecting pores and holes in insulating materials on conductive substrates such as steel, aluminium, etc. Typical applications are: Linings and coatings applied on ducts, pipes, hulls, oil and storage tanks, enamel, paint, rubber and bitumen linings, vessels and tanks, GFK and other plastics materials. Tanks or vessels must be filled with water or other conductive material.
Portable and storage battery supplied, PoroTest 7 offers a great variety of electrodes.
Test voltages:
0.5..7 kV for testing materials from 0.03..1.7 mm thickness
6..11.3 kV for testings materials from 1.4 .. 11.3 mm thickness
Now with elctronic control of test voltage depending on material thickness and vice versa!
|
|
Light-weight and easy-to-use, the battery powered porosity detector is suitable for inspecting electrically non-conductive coatings on metallic substrates. Working on the wet-sponge testing method, PoroTest 1 uses 9V direct current which is completely risk-free to the operator.
Coating thickness range: 0...300 microns
|
|
Sampling frequency reach up to 160MHz
Color TFT LCD display
Memory up to 1024 A scanned images, parameters and 64000 thickness values
32 detecting channels are available with separated detecting parameters and DAC curve in every channel
Equipped with gate setting and alarming function
Two scanning modes: A scan and B scan
Auto gain and manual B scanning
USB 1.1,fullspeed communication port available
Can be connected with PC to print out result
Pulser voltage adjustable
|
|
|
The EPOCH 1000 Series Digital Ultrasonic Flaw Detectors combines the highest level of performance for conventional portable flaw detection with the power of phased array imaging. The EPOCH 1000, 1000iR and 1000i feature a new horizontal case style with full VGA display, knob and navigation arrows for parameter adjustment, and full EN12668‑1 compliance. The advanced conventional ultrasonic functionality of the EPOCH 1000 series is augmented in the EPOCH 1000i with phased array imaging capabilities
|
|
Core fracture detection at die casting processed critical components made from light metal like aluminium or magnesium .
The light metal transparent metal detector of the MMD series detects broken off cores residing in the cast part. STLs unique Magnetic Field Measurement Technology offers an innovative solution for a yet unsolved problem.
This opens new dimensions for quality management in Light Metal Casting.
This new technology is also more precise, faster and cost saving than X-ray or Ultrasound test procedures.
The detector offer the following advantages :
The sensor is the only additional system in the
production process
Also for existing equipment by integration in
robot software
Short measurement time, ideal for high
throughput production environment
Maintenance free
Reliable even at high interference level
++++ STL is looking for a distributor with excellent
contacts to the Aluminum Industry for this product++++
|
|
The double blank control units of the R1000 series were designed with a maximum of common features. They have, e.g. the same interfaces to the PLC and the press controls and an identical control panel. They exhibit the following common features:
* Digital display of sheet thickness and operating parameter
* Memory for 255 double blank parameter sets
* Monitoring of operating voltage and measurement time
* Outputs for 0-sheet, 1-sheet, double blank and enable with relay or opto coupler outputs
* PLC interface
* Optional fieldbus interfaces: Profibus, DeviceNet, ControlNet, Interbus or CANopen
* Optional: Field enclosure (IP65) or front panel mounting
|
|
Minisonic ISD detects the changes of products in a pipeline by measuring the speed of sound. The speed of sound is a precise specification of the product and has a correlation to density or concentration.
Minisonic ISD is also a detector of the passage of pigs and spheres in a pipeline by the analysis of the acoustic signal.
The measurement of the speed of sound depends on the temperature and pressure conditions, so it is necessary to use a numeric corrector to obtain the real measurements.
The Minisonic ISD is available in a standard or explosion proof model.
|
|
|
The improvement of the conventional welding methods, the widespread use of the laser welding as well as subsequent treatments e.g. annealing and coating have made the automatic detection of the tube weld seam in many manufacturing processes such as in tube and pipe benders or hydroforming a demanding task for modern sensor technology . This applies both to the weld seam detection in tubes as well as to flat stock e.g. coils. Therefore, the use of special sensors designed for special tasks, digital signal analysis with microprocessor or PC-based control systems have received our special attention.
|
|
|
|
|
|
The TapTone 4000-DSC - Dual Sensor Compression (DSC) system is designed to inspect a wide variety of flexible containers for micro leaks. The design incorporates our patented dual sensor technology and high speed compression belts for improved accuracy and container handling. The system was designed for harsh, wet environments, like those found in the dairy industry. When combined with the optional X-ray sensor, the system can also perform fill level inspection.
X-ray Technology - measures the product fill level in steel, aluminum, glass, plastic and paper containers. An X-ray tube is used to produce a low-energy X-ray beam. The X-ray beam penetrates the side of the container in the area of the fill level. An X-ray detector is positioned on the opposite side of the container to measure the intensity of the beam after it goes through the container. The intensity of the beam is then compared to acceptable energy levels to determine the relative fill level of each container. The X-ray sensor is used to measure both overfilled and under filled products in all types of containers.
|
|
X-Ray Sensors offer a number of advantages over beta and gamma sensors, including greater precision, better streak detection, long-term stability and non-nuclear technology.
Since the X-ray sensor's energy output can be changed via digital power regulation, it can be optimized to run very efficiently over a wide range of product weights and thicknesses.
|
|
|
|
|
|
CALIX series is the first LAP product family for thickness measurement in one single sensor housing. They can be used instead of applications consisting of displacement sensors and measuring frame without the need for temperature control and frequent recalibration.
The alignment of measuring beams is optimised during production at LAP. CALIX sensors don't need complicated adjustments of opposing sensors in the measurement frame. Errors related to alignment won't occur. LAP CALIX sensors can easily be integrated into production lines. They reach over the objects to be measured from the side, without the need for O-frames or bridges.
CALIX sensors are available with different measuring ranges and limb lengths. The limb length limits the distance of the measuring spot from the objects edge. CALIX sensors may also be used for traversing applications, moving in and out or along the edge of the object.
Sensors of CALIX series provide extremely precise results on virtually all materials, independent of limb length and measuring range. They automatically adapt to changing colors and surfaces. Even measurements on shiny aluminium, non-vulcanized black rubber, and soft or sticky materials are possible.
|
|
|
|
|
|
|
The Series 4000 Capacitec amplifiers and racks were designed to offer the best signal to noise ratio and wide band width response options in a simple modular package. The 4000 Series was built upon our 20 year proven foundation of 3000 Series amplifiers (3101-SP, 3200, 3201-SP) still in operation. Utilization of individual pins in a 32 pin DIN connector increases reliability for more industrial applications where vibrations are present. The small Euro-style 2U size boards have appeal for small portable packaging as well as high (but lightweight) density applications. When coupled with Capacitec non-contact displacement probes, they produce a linear output voltage proportional to the gap spacing between the probe and a ground plane. The systems are designed to produce stable and reliable operation with excellent gain and zero shift stability with respect to changes in ambient temperature. Stability is achieved with a digitally derived sine-wave oscillator, having a crystal clock as the frequency reference.
|
|
Features:
- Portable, handheld units
- Battery operated
- High resolution display
- Temperature compensation
- Interchangeable transducers
- Windows software
- Built-in probe zero block allows easy exchange of transducers
- Regression analysis for custom material calibration
- Windows software to download measurements create reports, and upload test parameters
- Direct-to-printer reports
|
|
Weigh Modules and Force Transducers
* High accuracy
* Superior installation properties
* Withstands up to 100% side load
* For hard environmental conditions (IP67)
* Covers most applications
|
|
Weigh Modules and Force Transducers
* High accuracy
* Superior installation properties
* Withstands up to 100% side load
* For hard environmental conditions (IP67)
* Covers most applications
|
|
|
|
|
|
OTS 50 the industrial thickness meter for sheet glass and acrylic panes.
The OTS 50 is a sensor especially developed for measuring on transparent, parallel and highly reflective surfaces. Directly aimed at the glass industry for on-line control of the production of double glass units, DGUs, also known as thermo windows.
The sensor is controlling thickness of the window units providing precision measurement of the thickness of one or more glass/acrylic panes. The measuring principle is based on total/direct reflection from one side of the object/window. The OTS 50 sensor is a very rugged and compact unit. All optical and electronic elements are contained in the sensor unit, this is a valuable quality for many industrial applications.
In addition to the competitive palette of ODS standard sensors and O2DS scanners, DSE design and customize special sensors to our customers needs. The OTS 50 is a good example of this appreciated DSE activity.
For further information please study the PDF/datasheet available at our website www.sensor.dk
|
|
|
|
|
|
Features:
Eliminates Damage to Embossing Rolls
Monitors the entire width of the embossed web as it leaves the embossing rolls
Alarm signal can alert operator, automatically shear the paper ahead of the embossing roll or automatically stop the machine
Uses up to three pairs (transmitter/receiver) of MICROSONIC ultrasonic thru-beam sensors
Microsonic Thru-Beam Web Sensing System
Web inspecting applications
This innovative sensing solution is applicable to industries that convert plies of materials into embossed napkins, paper towels, plastic-lined paper table cloths and other consumer products. The Model SS100 Web Sensing System uses MICROSONIC, thru-beam sensors to eliminate the costly problem of broken plies wrapping around, heating up and damaging embossing rolls, as well as the resulting downtime required to make necessary repairs. False trips or no trips at all resulting from dusty environments, or problems associated with sensors not immune to changing colors and materials, are also eliminated.
|
|
|
|
|
|
Detection Technology's X-Scan f-series products have, since 1999, offered the solutions for food, pharmaceutical and industrial NDT inspection needs. The current X-Scan f3 series is already the third generation of evolution in the industrial X-ray inspection arena.
X-Scan f3 series as the imaging subsystem of an X-ray inspection system provides the easy-to-use solutions for all applications, which require fast speed, high sensitivity and high resolution with an inspected object transported on a belt conveyor or similar apparatus.
Detection Technology's X-Scan iHE is an optimized series of products for high energy industrial NDT applications. The X-Scan iHE can provide the solution for very wide range of X-ray source with optimized X-ray absorption efficiency in the high energy range from 160KV to 5 MeV.
Detection Technology's X-Scan iCT product is the optimized solution for industrial, high energy computed tomography applications utilizing linear accelerators as the radiation source.
Detection Technology's X-Scan U-Shaped detectors have specifically been developed for the digital tire inspection of engineering tires, radial tires, car tires and giant tires.
|
|
| ... products without technical information |
| |
|
|
