|
|
X-Ray Sensors offer a number of advantages over beta and gamma sensors, including greater precision, better streak detection, long-term stability and non-nuclear technology.
Since the X-ray sensor's energy output can be changed via digital power regulation, it can be optimized to run very efficiently over a wide range of product weights and thicknesses. |
|
Features:
Resolution: 0.1 µm
Linearity: +/- 1 µm (Diameter)
Linearity: +/- 0.5 µm (Position)
Standard gauge fingers for measure of diameters from 5 mm to 90 mm.
Watertight.
Measure of smooth or interrupted surfaces.
Gauge slides driven by air or oil.
Fine adjustment on slide.
Wearproof fulcrums.
Advantages:
Accurate.
Sturdy, suitable for installation on grinders.
Fits pre-, in-, and post-process applications.
Quick set-up and retooling. |
|
Features:
Overall dimension: 20x40x76 mm.
Measuring range: up to 12,5 mm
Repeatability: < 0,05 µm.
Connection to the electronics through cables long up to 30 m
Memory chip for process optimization.
Pneumatic recoil.
Quick manual retooling of the fingers.
Wide range of fixed or manually adjustable supports.
Fingers available with breakaway pin.
Advantages:
COMPATIBILITY
Fits all measurement applications related to:
- diameter
- position
on new or operating machines
No limits of installation due to the loss of the signal.
ACCURACY
Within the measuring range:
- sub micron, through automatic calibration on the master for every measure.
- micron, through automatic calibration on one master only for all measures.
PRODUCTIVITY
No manual retooling within the measuring range.
Quick manual retooling for adjustment to a new family of pieces.
Prevention from machine breakdown due to accidental impacts. |
|
Features:
» Handling of two LVDT transducers, for continuous and interrupted surfaces gauging.
» Compact size.
» Bench and built-in versions.
» Application customisation by the user through the set-up of:
- Gauging formulas;
- Arms ratio for self-learning;
- Metric or British measurement units.
» Analogue indicator for the continuous measurement
display, with x1 and x10 automatic scale change.
» Digital I/O, SINK or SOURCE type, for the connection to CNC/PLC.
» The operator's panel provided with sensitive waterproof sandwich keyboard allows:
- Setting the three gauging thresholds for the output contact;
- Setting the delay of cycle start input contact and zero quota output contact;
- Setting the zero correction value (offset);
- Selection of the reading of individual transducers for the mechanical manual zeroing;
- Measure electronic, manual and automatic zeroing.
» Memory and LEDs test performed at start-up.
Advantages:
» Accurate.
» Simply to configure and to programme.
» Can be integrated in any architecture both in a new machine or in an already operating machine.
» Comfortable to use.
» Tough and reliable.
» Affordable. |
|
Hydraulic Pressure Balance: up to 0,005% rdg.
Series MPA BLUE-LINE
Expanded uncertainty between 0,005% rdg and 0,075 % rdg.
- Errors electronic compensation
- Masses identification
- Automatic motor rotation drive
- Easily transportable
- Ranges up to 1200 bar
|
|
-Full hydraulic steering, power shift, hydraulic operation working device and flexible operation.
-Distinctive sturdy structure, excellent breakout force, shorter cycling time, high efficiency.
-High strength transmission shaft, high resistance against impacts, reliable constant power transmission.
-Air-assisted cover made by compound material reduces noise and vibration, and makes operation and maintenance convenient and flexible.
-Air pressure protection and emergency braking are integrated as well as safe and reliable.
-New cab features, wide visibility, sealed and vibration reduction, contributes to operator comfort. Cabs can be equipped with air-condition.
-Cummins diesel engine insuring maximum performance and efficiency.
Several attachments available: soil buckets of different sizes, snow-buckets, coal bucket, clamp, side dump bucket, and longer booms, make this machine ideal for different working conditions. |
|
-Optimum design and integrated working productivity tool, excellent dumping clearance, dumping reach, and breakout force; total cycling time is exceptional. Automatic leveling and overall superior productivity.
-ARTICULATED Center-point frame, small turning radius, front and rear wheels feature track reduce resistance and tire wear, maintains performance in all types of terrain.
-Fully hydraulic steering, power shift transmission, flexible operation.
-Key-black type propeller shaft, high resistance against impacts, constant power transmission which is highly reliable.
-Air-valve control type emergency brake system increasing safety.
-Integrated hood made of compound material, right and left access, auto-lock, reduced sound, easy maintenance and operation.
-Luxury full cab according to modern principals of ergonomics, excellent visibility. Optional air-conditioner provides operator with a comfortable job environment. |
|
-Full hydraulic steering, power shift, hydraulic operation working device and flexible operation.
-Distinctive sturdy structure, excellent breakout force, shorter cycling time, high efficiency.
-High strength transmission shaft, high resistance against impacts, reliable constant power transmission.
-Air-assisted cover made of compound material, reduces noise and vibration and offers convenience to both maintenance and operation.
-Integrated air pressure protection and emergency.
-New features in the cab, wide visibility, sealed and vibration reduction, offers excellent operators comfort. Cabs can be equipped with air-condition.
-Cummins diesel engine ensuring maximum performance and efficienc.
-Optional attachments available: soil buckets of different sizes, snow-buckets, coal bucket, clamp, side dump bucket, and longer booms, makes this machine adaptable to different working conditions. |
|
| High performance, reliability, ease of operation, toughness and good stability - these are the highlights of the Wheelloader series. Two lifting cylinders and the powerful tipping cylinder generate significant lifting and biting forces. The load arms are extremely rugged and torsion-resistant, and the polished kinematics guarantee good parallel alignment. Automatic return of tools to their working position is a standard feature of all Wheelloaders. The comfortable cab is easy to enter from both sides and offers an excellent all-around view through tinted, deeply extended windows. |
|
| High performance, reliability, ease of operation, toughness and good stability - these are the highlights of the Wheelloader series. Two lifting cylinders and the powerful tipping cylinder generate significant lifting and biting forces. The load arms are extremely rugged and torsion-resistant, and the polished kinematics guarantee good parallel alignment. Automatic return of tools to their working position is a standard feature of all Wheelloaders. The comfortable cab is easy to enter from both sides and offers an excellent all-around view through tinted, deeply extended windows. |
|
| High performance, reliability, ease of operation, toughness and good stability - these are the highlights of the Wheelloader series. Two lifting cylinders and the powerful tipping cylinder generate significant lifting and biting forces. The load arms are extremely rugged and torsion-resistant, and the polished kinematics guarantee good parallel alignment. Automatic return of tools to their working position is a standard feature of all Wheelloaders. The comfortable cab is easy to enter from both sides and offers an excellent all-around view through tinted, deeply extended windows. |
|
Wheel Loaders : WA900-3
Komatsu-integrated design
For the best value, reliability, and versatility. Hydraulics, power train, frame, and all other major components are engineered by Komatsu. You get a machine with components that are designed to work together to deliver higher production levels, greater reliability, and more versatility.
High productivity and fuel efficiency
High performance SAA12V140E-3 engine
Low fuel consumption
Dual-mode engine power select system
Automatic transmission with shift timing select system
Superior dumping height and reach
Standard, high-lift and Load & Carry booms are available in order to suit your application.
A full range of buckets and wear parts |
|
... see all the products in the category
Loaders
|
Conveyor beltweighers weigh and control continuous flows of bulk materials accurately and without inconvenient interruption.
Careful adaptation to the respective product characteristics is the basis for repeatable results.
• Flexible product range for almost all common belt widths; designs for use in legal metrology also available
• Adjustment, batching and loading control extend the field of application and provide optimized product flow and handling |
|
| ... products without technical information |
| |
The group of weighing and automatic labelling at Gemini high speed functions under a computing system able to treat the weighings with speeds going to 150 products per minute.
For detailed information, visit www.preciamolen.com |
|
The group of weighing manual labelling I 500 makes it possible to carry out the labelling of the fresh produce in the small boats under films.
Of a great facility of use thanks to its touchscreen, I 500 gives access easily the operations of weighing labelling (use, programming).
I 500 was designed for an integration in the corporate network (operation multipost, exchange of information by network, Ethernet TCP/IP or key USB, connection to the databases of the company.
Its great memory size is the guarantee of a traceability total (number of operation and single DSD, management of the batches, data of traceability skeletal per family of products.
For a faster seizure of the data, the terminal I 500 can be equipped with a keyboard of the type PC and a reader of bar code.
The group I 500 is composed:
Of a terminal of weighing I 500:
- an accessory measures
- 2 ports series
- 1 parallel port
- 1 port USB
Of a platform R1 DLS
Of a printer P950 or P970
Of a key USB 64 Mo
Of CD creation of labels
In option:
- second printer
- second and third ways of measurement
- Ethernet port
|
|
Burt labelers are exceptional for any roll through application. This horizontal labeler accommodates diameters from 112 to 704 and will run metal, glass, plastic and aerosol containers.
-Models: 408 and 704
-Speeds up to 800 CPM
-Labels replenished without stopping production
-Narrow label packages available
-Container changeovers in 15 minutes
-Valco lap system available |
|
| ... products without technical information |
| |
Sartorius ProControl for Windows®
…modular scale-up system for recording, monitoring, evaluating and archiving all quantitative and qualitative product, process and environmental parameters.
• Average weight control | SPC | Attribute testing | HACCP
• Ranges from stand-alone to network systems
• Solutions for every requirement
• Optimal central computer and workstation ergonomics
• The most advanced software platform guarantees a future-proof investment
Contact us for a free trial version. |
|
The GARVENS AccessCard gives you optimum control of access to your GARVENS checkweighers. GARVENS PrintCard or GARVENS PrintStick for checkweighers not connected to a data network: instead of printing evaluations such as daily reports, statistics or counter levels at the checkweigher, you can simply save such data on a PrintCard or PrintStick.
The GARVENS LogIn-Server for quality and security conscious companies is a monitoring system creating a personalised, traceable log of when and by whom any particular checkweigher was accessed. FreeWeigh is a comprehensive SQC software package with Windows user interface which allows all production data to be centrally monitored and recorded.
GARVENS CW-ReAcT II enables remote administration and centralised maintenance of the product setup data (article data), remote monitoring of production information captured by GARVENS checkweighers such as statistics, and printing of such data. |
|
Various AL series, BL (LH) series and EL (LL) series leaf chain or design according to customers' application.
Supply also Clevis and anchor pins with special surface coating at customer request. Used on all types of forklifts, cranes, hoists and also car packing systems. |
|
| Leaf Chain, commonly known as "Balance Chain", is the most simple of steel chains, consisting only of link plates and pins. This chain is subject to ANSI standard, and suitable for hanging, balancing, or motion transmitting applications. Plates are connected by pins and hold the tension loaded onto the chain. Pins are to resist the shear force from tension loading applied by the link plates and to withstand abrasion from the middle plate holes when the chain articulates. |
|
Big Bag-filling equipment (Flexible Intermediate Bulk Container, FIBC) is manufactured by Möllers using gross-weight weighing. Octabin-filling machines are offered, with infinite height adjustment, filling lid and suction device.
Peripheral equipment is available for plant automation systems |
|
PneumaticScaleAngelus has a diverse selection of pre-owned filling technologies. Our Pneumaflow and Easi-Flow are ideal for constant level fills while the Accuflow Positive Displacement and Pfaudler Rotary Piston fillers are perfect solutions for volumetric fills. The Liquid and Dry Net Weigh fillers are for those customers who value the highest level of accuracy with minimal product loss. The Mateer Auger fillers are well suited for dry filling applications.
-Widest variety of technology
-Fill speeds and accuracies verified in test lab
-Close-coupling to PSC capper available
-Reliable, minimal-maintenance and highly versatile filling solutions from the industry leader in packaging automation
-Superior customer service and technical support |
|
| ... products without technical information |
| |
|
... see all the products in the category
| |
