|
|
| The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies. |
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation |
|
Detecting manufacturing defects such as positional, missing, skewed, misplaced, incorrect device, incorrect polarity, solder and lead defects is fast and reliable. Unique dual lighting delivers the capability of inspecting laser marking on IC’s and SOT devices. An additional benefit is that it also delivers enhanced inspection of 0603 and 0402 devices.
Developed by DiagnoSYS for operator ease of use, this true AOI software is the most advanced available. Each system utilises the same software for extended ease of use. Comparator software, included, is a perfect solution for inspecting low volume assemblies without the need for programming.
Full manufacturing integration
The ScanPoint DT addresses prototype through to medium volume requirements complementing the ScanPoint 50 in-line system which targets medium to high volume. The family is complete with off-line programming allowing programs to be generated without interfering with production. Programs can be shared across multiple DiagnoSYS AOI systems. Data logging of test results is complimented with a full rework station capability |
|
| ... products without technical information |
| |
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting |
|
| ... products without technical information |
| |
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
PETER electronic has added the compact type series VersiBrake 230/400-25 L (LP) to its tried and tested product line of electronic DC brakes. The device, which features an upgraded power section designed for a rated device current of 25 A, is available either as a housing version or as a circuit-board version for rated motor currents up to 12.5 A. In preparation for the certification by the German Trade Association (Technical Committee for Wood), VersiBrake 230/400-25L (LP) already now meets the association's requirements for category 2 acc. to EN 954-1. VersiBrake 230/400-25 L (LP) features double safety protection: i.e., control via motor contactor and motor voltage detection. In addition, a surge suppressor circuit and a braking current infinitely variable between 0 and the rated device current reduces the failure probability of the braking device and thus indirectly that of the machines, too. An integrated overload monitoring function, which, if the braking frequency is too high, prevents motor restart, provides safety both for the VersiBrake and the operator. The integrated and adaptable motor standstill detection gives the user flexibility with regard to the motor types available.
|
|
High inrush currents with AgSnO contacts (TV4 = 65 A)
4 kV/8 mm coil-contact
Reinforced insulation (protection class II)
Ambient temperature up to 85°C at 8 A
Plastic materials according to IEC60335-1 (domestic appliances)
RoHS compliant (Directive 2002 / 95 / EC) as per
Applications
HVAC, interface technology, power supplies, TV-/Monitor control,
computer-/communication technology, domestic appliances, Hi-Fi
products, timers, etc |
|
- contains RM40, RM50, RM84, RM84 SMD, RM85, RM85 inrush, RM85 faston, RM85 SMD, RM85 105 °C, RM87, RM87 SMD, RM96, RA2, RM960, RMB961, RMB962, RM699V, RM699H, RM63, RMB631, RMB632, RM64, RMB641, RMB642, RM83, RM92, RM93, RM94
- Range of rated load: from 5A up to 16A
- Range of coil voltage: from 5 up to 220 V DC and from 6 up to 380VAC
- Assembly: plug-in sockets for DIN rail or for panel, PCB |
|
| Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available. |
|
- contains RSM850, RSM850B, RSM822, RSM832, RSM954, RSM957
- Range of rated load: from 0,5A up to 5A
- Range of coil voltage: from 3 up to 48 V DC
|
|
The SK range for PCB mount is available in 2 cases :
SKA / SKB (AC output) or SKD (DC output).
SKA up to 6A 230 or 400VAC with built-in voltage protection, ideal for solenoid or motor control
SKB up to 4A 230 or 400VAC for resistive loads
SKD rated 3A / 60VDC or 1A / 200VDC
SKL for AC output with a ceramic substrate that can be mounted on a heatsink (see picture). The SKL range is ranging from 16A to 75A.
For the power element, our SKL use TMS2 technology (see the Power relay section introduction) reducing thermal stress and considerably
improving life expectancy. Ideal for motor control (I2t up to 5000 A2s) with high inrush current as well as heating application. Easy to protect
against short circuit with micro circuit breakers. |
|
| Electronic control circuits built on PCB’s demand relays that can be populated with the same machinery currently used in the production lines. The Magnecraft SIPS and DIPS are built in small industry standard package styles that do not require unique machinery to populate. The SIPS and DIPS can even withstand a lead-free solder re-flow process so a pin-thru-paste application is possible. |
|
| Yaskawa's Bestact™ high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
