|
|
Designed to inspect fluids and semi-solids, the InspireX R70 x-ray system is capable of detecting contaminants or variation from established standards before the final packaging, minimising your wastage. The system features automatic calibration, one-touch operation and can be set-up within three minutes.
Description
For the pipeline x-ray inspection of contaminants, the InspireX R70 offers reliability and superior efficiency. Designed to meet the highest hygienic standards - IP69K, it is robust to withstand the harshest wash down environments. Fast and efficient x-ray calibration is incorporated as the x-ray generator and detector retract from the pipe line without the need of manual intervention, saving both time and money. Available in four pipe sizes, the system can inspect product flows up to 12,000 kilos per hour.
|
|
Verimation’s Verimet® 7700 Portable Eddy Current Tester is a portable micro processor-based eddy current instrument for heat verification, alloy sorting, hardness inspection and case depth testing of ferrous metal parts. Versatile and accurate it offers improved capabilities for a wide range of applications. The instrument is compact, lightweight and battery equipped so it is very easy to use.
|
|
The modular design is common to all systems: Host PC, measuring channels and interface module are separate from each other. The measuring channel execute the measurement and pass the measuring results to the Host PC whereas the interface module control the communication between Host PC and the equipment PLC. These testing equipment structures have resulted in very cost-effective solutions.
Applications: Quality control by non- destructive testing during the production of wires, cables, rods, bars, tubes and coils.
Material thickness: All metals
Measuring method: Eddy current measurement
Functional principle: When the material passes / transits the sensor, irregularities (welding faults like cracks, pores or circumferential faults) will be detected by changes of the eddy currents within the material.
Special features: Modular design based on the separation of measurement channels, interface module and Host PC.
|
|
|
Verimation Technology, Inc. is a leading manufacture of Ultrasound Test Systems for automotive applications. This method of Non-Destructive Testing is very accurate and reliable. Testing is performed by coupling short bursts of high frequency sound waves to the test part. The wave patterns are then analyzed and test results are generated. This method of testing can find internal flaws and analyze material properties without cutting or destroying the part.
|
|
Checking - rolling - measuring machines with automatic or half automatic packing.
Main operations:
-Checking, rolling, measuring any type of cloth.
-Cloth inlet from small/big rolls and from folds.
-Cloth outlet on small/big rolls and on soft folds.
-Infinitely variable speed from 0 to 160 m/min. according to the type and the cloth to be rolled.
-Selvedge alignment of proportional photo-electric type.
-Innovative synchronisation systems of the driven cylinders allow rolling operation with constant tension of any type of cloth, needed compactness besides precise measuring.
-These machines are manufactured till max. working width of 4500 mm.
-You can add, on request, informatic control systems, fault detection, labelling, sewing unit, cutting machines, automatic elimination of second choice cloth without manual intervention of the operator, packing, etc.
|
|
Checking - rolling - measuring machines with automatic or half automatic packing.
Main operations:
-Checking, rolling, measuring any type of cloth.
-Cloth inlet from small/big rolls and from folds.
-Cloth outlet on small/big rolls and on soft folds.
-Infinitely variable speed from 0 to 160 m/min. according to the type and the cloth to be rolled.
-Selvedge alignment of proportional photo-electric type.
-Innovative synchronisation systems of the driven cylinders allow rolling operation with constant tension of any type of cloth, needed compactness besides precise measuring.
-These machines are manufactured till max. working width of 4500 mm.
-You can add, on request, informatic control systems, fault detection, labelling, sewing unit, cutting machines, automatic elimination of second choice cloth without manual intervention of the operator, packing, etc.
|
|
|
The v|tome|x s is an ultra high-resolution CT system, equipped with a special image grabbing and processing software.
|
|
|
The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies.
|
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
DE-F SERIES
Mask-less, New Matrix Beam scan method Suitable for general PWB process with excellent cost-performance
|
|
|
Rudolph Technologies provides automated wafer edge top and edge normal inspection with throughputs of greater than 80 WPH (300 mm). The Class 1 certified system has an approximate 10 minute set-up time to be fully optimized and production ready. Featuring on-the-fly color defect image capture and intrinsic ADC capabilities, the E25 System can automatically detect and classify defects on the entire wafer edge, from the edge exclusion area to the bottom bevel. Both brightfield and darkfield illumination are available.
|
|
|
The bench|mate is an economically priced, very compact high-resolution X-ray system for a variety of inspection tasks. Its modular setup enables the customer to easily upgrade the system to meet more advanced inspection requirements.
|
|
The ml|inspector is a high-resolution microfocus X-ray system designed for inspecting multilayer boards.
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
|
Marposs non-destructive testing technologies offer solutions based on the eddy current method for 100-percent inspection of critical components required to meet today's safety and reliability concerns.
|
|
Portable shearography (Q-810)
Non-Destructive Inspection
* Fast inspection of composite structures
* Field inspection
* Portable system
* Easy operation
The Portable Shearography System Q-810 is a fully portable and compact inspection system for fast inspection of components made from composite structures like aircraft fuselages and components, rocket shell parts, marine ship hulls, pipes, etc..
The system is fully portable and is designed for field inspection services. The Portable Shearography Inspection System Q- 810 consists of a vacuum hood with flexible sealings, which can be attached to the component to be inspected.
Inside the hood a vacuum up to 150 mbar can be pulled in order to stress the material underneath the hood. Any debonding or structural defect will be detected by the integrated shearography camera. The camera image is analyzed by the software package ISTRA for Windows® and displayed on a computer monitor and head up display.
|
|
ETA™ physical test systems
Quality assurance with high precision
High productivity requires appropriate process equipment combined with efficient inline and offline quality assurance systems. In order to optimize the production process, which means balancing highest throughput and defined quality, precise measurements are of key importance.
AudioDev offers a complete family of ETA inline and offline measurement systems. Based on the core competences in Spectrometry and Laser Technology, the measurement systems generate the most precise measurements. Most systems are turn-key solutions equipped with state-of-the-art hardware and software modules, designed for easy operation.
ETA-systems belong to the most efficient and reliable process control systems installed at manufacturing facilities worldwide.
|
|
|
|
|
|
The shearography technology is an interferometric test method with which damage or defects can be identified on components under load. This measuring technique even allows detecting deformations of only a few micrometers in size. Already a relatively low component load can thus yield unambiguous measuring results, which are mandatory particularly for NDT testing.
The test object is illuminated with laser light and observed through a CCD camera equipped with the so-called shearing optics. These shearing optics project the object image onto the camera chip twice; each object point is thus represented twice on the CCD chip. When the test object deforms under load, the laser light reflected by the component changes. By superimposing an image showing the unloaded object state with an image taken in the loaded state, the change of an image point can be determined. The optimum test load type (thermal load or pressure and vacuum load) for the individual component depends on the fault type and fault depth and is ideally determined before serial testing by trial measurements using sample components.
|
|
This self-contained, PFI-type pulp beater subjects pulp to a specific beating schedule to process pulp prior to forming hand sheets.
APPLICATIONS
Pulp Preparation
SPECIFICATIONS
* Conforms to CPPA C7, TAPPI T-248 and ISO 5264-2.
* Paprican certification available.
FEATURES
* Integrated wash cycle
* Roll, bedplate and all external panels are 316
* Stainless Steel for easy cleaning
* Automatic raising and lowering of beater roll for safety and convenience
* Front panel LED indicators show control sequence status for convenient monitoring and troubleshooting
* All controls and sequences are on conveniently located touch pad control panel.
* Digital counter
* End of cycle alarm
|
|
Canadian Standard Freeness Tester determines the rate of drainage of a dilute pulp suspension and express it in terms of freeness. The rate of drainage is related to the work done on the fibre during beating or refining. Two models are offered: Wall mounted (brass), and stand model (stainless steel).
APPLICATIONS
Pulp, Synthetic fibres
STANDARDS
Meets TAPPI T227, ISO 5267/2, AS/NZ 1301, 206s, BS 6035 part 2, and CPPA C1
FEATURES
* Calibrated and traceable to industry standards
* Easy to operate
* Extremely accurate
* Durable, heavy construction
* Stand model is constructed of corrosion resistant stainless steel and Wall model is constructed of brass
|
|
The Standard Sheet Former includes all of the accessories required to prepare 159 mm hand-sheets in accordance with the appropriate standards. This stainless steel device produces laboratory hand sheets to allow the test and evaluation of the physical properties of pulp.
APPLICATIONS
Pulp, Paper, Recycled Paper
SPECIFICATIONS
* Complies with TAPPI T-205 & T-218, PAPTAC C.4 & C.5, ISO 5269/1, SCAN C26
FEATURES
* Durable, 316 Stainless steel construction
* Polymer sump
* Manual stirrer and inlet valve
* Unique latch system that ensures a proper seal of the deckle
* Complete with grid plate, stirrer, couch roll, 2 couch plates
* White Water Return System available (option)
|
|
|
The nanotom® is the first 180 kV / 15W nanofocus® computed tomography system perfectly tailored to applications in materials science, micromechanics, electronics and biology.
|
|
| ... products without technical information |
| |
|
|
