|
|
|
For auxiliary power between 45 - 338 kVa (36 - 270 kWe), John Deere generator drive engines deliver quiet, smooth operation that never lets you down. You may even forget they are on board until you turn on the lights or plug in an appliance.
|
|
|
Our company adjusts 'It is earth friendly' in the motto as a leading company of the industry, and it positively works on effective use for the environment and energy, and it keeps promptly adjusting to customer's needs.
|
|
A wider range of services and automated systems has increased the demand for electricity on board ships. MAN Diesel supplies engines or complete generating sets to secure reliable and economical power generation.
Modern auxiliary engines are run on the same high-viscosity fuel grades as the main engines to maximise economy. Overall installation costs can be minimised by using compact modular fuel treatment systems, available in standard sizes.
|
|
Scania’s diesel engines are used in generator sets for both prime power and emergency applications.
The engines compact dimensions make them easy to package, both for Stand-by Power and Prime Power installations. The engine range consists of a 9-litre 5-cylinder engine, a 12-litre engine 6-cylinder and 16-litre V8 engine. They cover a power range from 250 kVA to 700 kVA.
|
|
Scania’s diesel engines are used in generator sets for both prime power and emergency applications.
The engines compact dimensions make them easy to package, both for Stand-by Power and Prime Power installations. The engine range consists of a 9-litre 5-cylinder engine, a 12-litre engine 6-cylinder and 16-litre V8 engine. They cover a power range from 250 kVA to 700 kVA.
|
|
Scania’s diesel engines are used in generator sets for both prime power and emergency applications.
The engines compact dimensions make them easy to package, both for Stand-by Power and Prime Power installations. The engine range consists of a 9-litre 5-cylinder engine, a 12-litre engine 6-cylinder and 16-litre V8 engine. They cover a power range from 250 kVA to 700 kVA.
|
|
The design features of Perkins engines ensure their suitability for all power generation applications of up to 2264 kVA in diesel power or 1008 kWe on gas. For gen set applications Perkins has a comprehensive range of ElectropaK™ specifications complete and ready to run.
Where combined heat and power (CHP) is needed, Perkins has a dedicated range of engines offering maximum fuel efficiency and minimal running costs. Every year Perkins produces more than 90,000 diesel and gas engines specifically for electrical power generation.
|
|
Kubota 05 Series D1005-E3BG
Model D1005-E3BG
Emission Regulation Tier 4
Type Vertical 4-cycle Liquid Cooled Diesel
Number of Cylinders 3
Bore mm(in) 76(2.99)
Stroke mm(in) 73.6(2.90)
Displacement L (cu.in) 1.001(61.08)
Combustion System IDI
Intake System Naturally Aspirated
Direction of Rotation Counterclockwise Viewed on Flywheel
Oil Pan Capacity L(gal) 5.1(1.35)
Starter Capacity V-kW 12-1.0
Alternator Capacity V-A 12-30.0
Stand-by 60Hz (1800rpm) kW 9.8
hp 13.1
ps 13.3
Continuous 60Hz (1800rpm) kW 8.7
hp 11.7
ps 11.8
Length mm (in) 551.3(21.7)
Width mm (in) 396.0(15.59)
Height(1) mm (in) 602.0(23.7)
Height(2) mm (in) 227.6(8.96)
Dry Weight kg (lb) 109(240.3)
|
|
|
MAN Diesel offers a wide range of engines for stationary power generation. Outstanding fuel flexibility is one of our core competences. Our system expertise ranges from captive power generation for applications in the cement, textile, mining or oil and gas industries, to power solutions for municipalities, utilities or independent power producers.
|
|
|
|
|
|
Designed for the power generation market that demands high efficiency, low emissions and low operating costs, the 16V150LTD engine was developed in cooperation with the U.S. Department of Energy. One of the highest efficiency engines in its class, the 16V150LTD gained immediate market acceptance after its 2006 introduction. The 16 cylinder 16V150LTD engine is rated at 1392 bhp (1038 kWb) at 1500 rpm (50 Hz) and 1531 bhp (1142 kWb) at 1800 rpm (60 Hz). Its size makes it a key building block in developing gas-fired power generation solutions for specific site needs.
Features
- 16 cylinder, turbocharged, intercooled, lean burn engine
- Two-stage intercooler directs 70% of heat to jacket circuit
- Miller cycle combustion technology maximizes efficiency while minimizing emissions
- Rated at 1392 bhp (1038 kWb) at 1500 rpm (50 Hz) and 1531 bhp (1142 kWb) at 1800 rpm (60 Hz), the 16V150LTD has 43.5% mechanical efficiency, making it one of the most efficient engines in its class
- Waukesha's proven Engine System Manager (ESM®) is standard and provides:
o Integrated spark timing control
o Turbocharger control
o Speed governing
o Individual cylinder knock detection
o Diagnostic tools
o Fault logging
o Engine safeties
o Air/Fuel ratio control
|
|
|
MAN Diesel offers a wide range of engines for stationary power generation. Outstanding fuel flexibility is one of our core competences. Our system expertise ranges from captive power generation for applications in the cement, textile, mining or oil and gas industries, to power solutions for municipalities, utilities or independent power producers.
|
|
Our VIRTUS standard gensets consist of standardized components which can be quickly and simply combined to form a complete system suited to the particular application required.
Each of the sub-systems in the gensets is carefully selected and precisely tailored to provide an exact match with our Series 2000 and 4000 diesel engines. As a result, our customers benefit from:
high levels of reliability
high load reserve
low fuel consumption
excellent load acceptance
low maintenance requirement
|
|
Engine Series 595
Engine model
No. of cylinders 12V 16V
Cylinder arrangement 72°V 72°V
Bore/stroke mm 190/210 190/210
Max. output kW 3240 4320
Max. speed rpm 1800 1800
|
|
Diesel Engines : 1125
- The product fills up the blank of Province, the standard of technic is superior.
- Special screw intake way and direct injection burning technic are combined perfectly, which improve thermal efficiency, reduce thermal losing, save fuel and charges.
- Intensifying the machine, cap and crooked axes design, which improve the reliability, the life of machine is longer.
- It is widely used for Four-wheel tractor, low speed truck, shipping, tricycle, construction machinery, dynamo set etc ... removable, fixed drive
|
|
| ... products without technical information |
| |
The Elliott Digital Governor (EDG) is a compact, cost efficient, packaged electronic speed control unit for precise, reliable speed control of mechanical drives or induction generators. The EDG has simple push-button control to provide improved reliability and speed control over hydraulic governors without the use of wearing parts such as linkages and bearings. Additionally, it does not require a separate programmer as required by many other speed control methods.
The EDG has numerous standard design features including a large, continiuous LCD display and a wide, continuously adjustable governing range from 200-10,000 Hz. Idle speed, ramp rate and turbine speed are programmable, while electrical trip speed is pre-programmed. Optional features include remote trip and start/stop capabilities. The unit is sized for 19-inch rack mounting and can be configured for NEMA A or NEMA D operation. The standard enclosure is NEMA 4X and is suitable for wall mounting.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
DST2600 is a compact and affordable gen-set controller system for power up to 40kVA.
DST2600 makes available all the functions of a traditional gen-set stand-by panel: full AMF controller with engine and generator protections, contactors for power transfer, battery charge maintainer, power relays for engine commands, measurement systems and display for electrical and other physical quantities.
|
|
DST4601/PX is the evolution of SICES renowned DST4601 AMF controller.
Aimed particularly to parallel application, thanks to its high degree of configuration, it can easily be used in quite all standard and special gen-set applications.
Born to manage the last generation of electronic engine, it supports CAN interface toward quite all most popular engines: J1939 protocol for VOLVO, SCANIA, DEUTZ, PERKINS, CAT, IVECO and MTU protocols for MTU engines.
A large graphic display, with a resolution of 240x128 pixels, allowed to implement a simple to use operator interface that is able, at the same time, to report an huge number of electrical and engine measures and information. Engine troubleshooting now can be made by textual interface (for example all MTU diagnostic codes are translated in plain English text).
|
|
|
Tide Powercon electronic intelligence power controller has inlaid high performance computer chips and various functions, such as measurement, control, protection and remote control all in one, and the controlling program and protective parameters can be changed, completely satisfying requirements of users and professional assembly factories on automatic control of different generator sets.
|
|
|
|
|
|
TEM10 are mounted on canopies. They allow the Manual and Automatic operation and the removal of power through alternator by socket protected by switches.
The degree of protection is IP55 in the command part, while it is IP44
in the socket place (IP 55 is an optional and it can be requested with special sockets).
These panels are suitable for being used daily in a generator in safety. Actually, they are characterized by sturdiness, components reliability and a lot of care during assemblying phase. A 10 poles connector (which is placed on the front part of the sockets panel) ,allows to connect to a Mains/generator transfer switch panel (i.e. ATS-E) managed by the Control Panel.
These panels are equipped with all it is necessary for their installation: bolts, power cable to connect to alternator (up to 125Amp), metal plug to be inserted into the panel to connect the engine cables.
They use an electronic device which is named TE806. It is simple and reliable. It is also homologated for being used in the most severe environments with maximum security. All controls related to mains and generators electrical measures and all engine controls are shown on a 4 led digits display. It is an easy and powerful device with a lot of available functions.
|
|
|
It is an easy, sturdy and practical manual panel for generating sets control. It is easy for inspection. It is made in a metal box. It is provided with anti vibrating camping pads. It can be directly connected to the alternator.
|
|
As a major Original Equipment Manufacturer and Supplier of turn-key plants, ALSTOM Power Service delivers not only after sales service for the key components, but also a broad spectrum of instrumentation and control as well as plant information systems solutions that allow to modernise plant control and improve and optimise your power plant business.
Instrumentation and Control Systems (I&C) perform the functions of regulation, protection, control, monitoring, alarm and information management on your power plant. It is a central information system that enables plant operators to supervise the plant effectively and to make the right decisions in time, and it ensures fault free operation of your plant. Therefore, state of the art I&C is beneficial and vital for plant information, decision making, competitive high end performance and high reliability of the plant.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
