|
|
|
|
|
|
The model 150 provides fully automatic labeling capabilities for improved productivity. It is ideal for pressure sensitive label application of pre-printed UPC or other barcodes and spot labels but can handle an assortment of label sizes and shapes. Top, bottom and label applications are easily accomplished with the unique angled U-Arm for easy positioning of the applicator hear to the product.
While the 150 is an economical machine, it is a rugged industrial-duty applicator that accurately (+/- 1/16”) applies pressure sensitive labels at the rate of 100-250 per minute depending upon label size. The synchronous drive of the 150 provides low maintenance, dependability and durability.
The anodized aluminum construction of the 150 provides protection from corrosive environments. With the ambidextrous LH and RH design, added flexibility is obtained and allows for change over in the field. The simplistic design results in minimal downtime, easy fault diagnosis as well as minimal parts inventory.
|
|
The M-Series range of print and apply labellers offers a fully modular solution to meet the many and varying needs of manufacturers today. Consisting of printers, applicators and accessories the standard configurations offer a solution for a vast range of print and apply requirements.
Enhanced throughput
- Seamless integration into production lines ensures line efficiency is maintained
- Labels can be applied to both moving and stationary products
Reduced errors
- The simple label selection for the M-Series ensures operator independence
- High resolution prinM-Series labelled boxes
ting of bar codes, text and graphics ensures supply chain compliance
Flexibility
- M-Series can apply a label with Blow, Tamp, Tamp-Blow or Wipe label application options, left and right hand variants to provide an optimal solution
- The unique design of tamp applicator pads enables a wide range of different labels to be applied using the same applicator pad
|
|
APL 4000 L; automatic label print & apply system especially designed for labelling secondary packaging at average linear speed.
It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 4000 R; it is designed to apply labels at the front or the back side of packaging.
The system integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPC global specifications.
|
|
APL 4000 B; especially designed for labelling secondary packaging without contact.
The labelling is done by air blow and ejecting the label. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 8000 Series; Self-adhesive labels real time print & apply system for pallets 1, 2 or 3 sides labelling of a pallet.
Designed and manufactured in accordance with the traceability standards for the entire delivery and distribution chain. It complies with the GS1-128 standards as well, as well as with the GS1 International pallet labelling recommendations. A print & apply system which allows the integration of a 6" printing engine with the best print engine units in the market: DATAMAX, SATO or ZEBRA. High resolution of 203DPI or 300DPI.
|
|
APL 4000 C; it is designed to apply labels in corners on secondary packaging, labelling two adjacent sides with one label.
The system contains a soft foam brush or cylinder, used to perfectly apply the label in a 90º angle. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPC global specifications.
|
|
|
|
|
|
Weber provides a number of solutions that will help make certain you are ready to meet new and emerging radio frequency identification (RFID) labeling specifications.
Our special smart label printers and printer-applicators encode data on ultra-thin RFID transponders embedded in labels and tags, while simultaneously printing text, bar codes and graphics. We also offer a special RFID applicator that encodes, verifies and applies preprinted pressure-sensitive smart labels. Both the RFID printer-applicator and encoder-applicator include a special feature that rejects and recovers non-compliant smart labels prior to application. In addition, we offer smart labels for use in our own RFID encoder-printers, plus a range of pre-encoded labels and tags to satisfy associated identification applications.
The emergence of RFID mandates presents an exciting new opportunity to improve the way all of industry captures and uses product data throughout the supply chain. Weber is working very hard to ensure that our customers will have a dependable source on the leading edge of RFID development.
|
|
|
The ID Technology Model 250r is designed to read, write, verify and apply RFID tags in top, bottom and side label applications all as one seamless process. Tags that fail to read can be discarded prior to application without disrupting product flow. The Model 250r features the same rugged design and modular configuration as the original IDT 250 Series printer applicator, as well as, "hot swap" spare assemblies that install in minutes. ID Technology offers a choice of Zebra, Sato and Datamax RFID print engines. The result is an RFID enabled printer applicator that adapts to your production environment.
|
|
Q33 RFID Ready
- High performance RFID-ready printer applicator
- Labels various products, shipping cases and pallets up to 100 ppm
- All quick disconnect electronics and pneumatics
- Uniquely suited for the most demanding applications
- Apply-only module can be configured to apply preprinted labels using a standard tamp or wipe on
- Pneumatic options for side, top, leading panel, adjacent side or corner wrap applications
|
|
APL 4000 D; system for the identification and double labelling of secondary packaging.
It also offers the possibility to apply and print two adjacent labels on the upper part and/or the side, vertically as well as horizontally. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
|
APL-ELV; self-adhesive labels real time print & apply for diverse heights pallets labeling as well as automatically label different heights within the same pallet. It allows selecting the printing and application of each label on different sides of the pallet, with irregular predefined heights. Equipped with an auto-brake, it assures a perfect label placement. Up to three labels per pallet and printing characteristics according to the standard APL model.
|
|
AL800
Equipped with easy label loading and useful LCD screen that guides the operator with useful step-by-step instructions, warnings, error messages and hardware status information, it will simplify operations and aids error recovery, contributing to better work efficiency.
|
|
Universal Print & Apply (UPA II) Printer Applicator is leading edge technology in product identification.
The UPA II features:
- Easy-to-use operator touch screen.
- Programmable Logic Controller (PLC).
- Quick change tamp head.
- Removable tamp assembly for easy access to print engine.
- Proximity "smart head" sensor.
- Product on delay.
|
|
Machine prints and applies your label on a wide range of products on the line, using air. Several models are available: flexible and user-friendly.
3 TYPES OF APPLY
- Top apply
- Bottom apply
- Side apply
2 VERSIONS
- HP 110 (20 to 110mm)
- HP 220 (20 to 220mm)
TECHINCAL FEATURES
- Maximum rate: 40 labels/ min according to the label, the speed and the gap
- Label length from 30mm to 300mm
- Label width from 20mm to 220mm
- Label reel diameter: 300mm max
- Label gap: 2.5mm
- Products flow from the left to the right or from the left to the right
- Accuracy: +/- 0.5mm
|
|
AEW Delford Systems has extended its range of labellers with the addition of the C3 Panel Label Applicator. This robustly built, user-friendly Label Applicator offers wrap around labelling of self-adhesive labels onto two or three sides of a tray or container.
The pack is driven through the conveyor by powered side belts and a unique brush wiper assembly ensures 100% adhesion of the label onto the pack.
The C3 Panel Label Applicator applies pre-printed labels. When a thermal transfer printer is incorporated additional information, such as bar code, sell by and nutritional details, can be put onto the label prior to it being applied to the pack.
The C3 can also be interfaced to a weigh price labeller or with AEW Delford System’s integral weighing unit, where variable information on a pack by pack basis, is forwarded to the C3 panel labeller and information is printed accordingly.
|
|
|
|
|
|
Sirius Tamper Evident
Design specifically to apply tamper evident labels to a wide range of cartons. Widely used in the pharmaceutical industry for touch labelling and is fuly validated to those standards. It can incorporate security systems of your choice.
Features
- Motion control system provides increased labelling accuracy coupled with absolute speed matching to cope with variable speed demands of today’s packaging lines
- Enhanced control system incorporating single touch screen user interface provides a very high level of user diagnostics. The unique software enables quick set-up times between product changeover and is self- monitoring to provide optimum reliability. This reduces the skill level required for operation and maintenance
- Fully integrated inspection systems to identify label and/or overprint presence; barcode readability is available and easily incorporated. Also available is the integration of a vision system capable of identifying label position on the product plus the correct lot/expiration data
- Modularised transmission system utilising the latest technology ensures that the Sirius provides the optimum level of flexibility and reliability for all current and future labelling requirements
- Increased cabinet space allows for greater flexibility for future upgrades
|
|
FAST Tag In-Motion is a turnkey automated solution for placing, tracking and verifying RFID tags on cartons and pallets. FAST Tag In-Motion integrates seamlessly into existing material handling and data handling systems, providing a low-risk upgrade path from conventional bar code labeling systems.
This solution is driven by Accu-Sorts FAST Tag software foundation, which provides localized edgeware for control, configuration, data management and reporting. As part of Accu-Sort's Tag-to-Ship" centralized system architecture (shown on next page), FAST Tag In-Motiong seamlessly integrates with you existing data management infrastructure through Accu-Sort's FAST Tag DataServer solution, making it scalable as your needs grow in the future.
|
|
|
PRINTESS is an electronic printer tnat uses thermal transfer technology, able to encode self-adhesive labels and to apply them automatically and immediately to still or moving object (Print-Apply system). The new generation of PRINTESS is the heir of a series of successfully used and well-tested label printers, produced in thousands and used in hundreds of different industrial applications. It is defined as a "Labeling Robot" as it is not simply a label-printer with applicator, but a fully automated operating machine with a wide selection of application cycles, control of the single operations, diagnostics, syncronism and alarms with the production line. The electronic unit has a 5.7" colour touch screen graphic display, wich enables the user to see the text it is printing and makes the setting of the parameters easier and more intuitive.
|
|
Arodo have the possibility to build in various types of printing and labelling devices which are:
- Labelling before the sack has been filled.
- Printing before the sack has been filled.
- Automatically stitching of single labels to the filled sack.
- Automatically stitching of labels which are supplied by means of a reel.
- Printing or labelling of the filled sacks on a belt conveyor.
|
|
|
|
|
|
Print & Apply Systems
Just-in-time production processes coupled with smaller stock holding levels and computerised stock control systems, are placing ever-increasing demands on a manufacturers ability to apply unique identification labels to individual products, whether it be for identification in retail outlets or logistical purposes. From printing and applying a small bar code label onto a blister pack, through to pallet labelling using A5 labels, (bigger print areas up to 220mm width x 500mm long using the HERMA T70 printer are available), there is a HERMA TT print and apply unit to suit every possible requirement.
In common with all of our labelling systems, our HERMA TT print & apply solutions are based upon a comprehensive range of tried and tested state of the art modules. A wide spectrum of printers and application units dovetail together to provide the perfect solution for even the most demanding of requirements.
On demand printing is not rocket science but it can be confusing, so with this in mind our Windows based "MecWin" software has been developed to make it child's play to design and modify a label format. With simple commands text, graphics and barcodes etc can be added at a stroke and printed at up to 300 mm per second.
|
|
Collating
Take advantage of SCHOBER's experience and know-how right from the beginning. We have been very successfully in the business forms industry for more than 50 years. Our product range includes:
Collators for business forms equipped with imprinting units for crash numbering and encoding , cross and longitudinal gluing units, punching stations and label dispensing units for payroll documents and data mailer products.
Automatic system for folding, stapling, counting and separating of ATB- and ATB2-tickets, parking- and event tickets, boarding passes, wallets, ...
If shingled-, horizontally or vertically folded, if counted, stapled or separated, Schober is always able to offer the most economical solution to optimize your printing press.
|
|
2 principal lines of material :
The application has the stop
The application moving
All our models are designed by our engineering and design department, and are assembled by our manufacturing unit.
We develop standard and specific systems clearly definite on a schedule of conditions.
|
|
LR8400RVe2
SATO's LR8400Rve2's labelling robot improves labelling throughput in every aspect of high speed data transmission, editing, label printing and application. It has a total of 16 different types of label applying choices to suit every occasion. It has high print speed of up to 8" per second. The compact design allows the robot to be easily installed into existing production lines and logistics areas. Now available in print resolutions of 203dpi or 305dpi.
|
|
Process development
Take advantage of our engineering experience. Schober supplies more than just individual components. Therefore it is quite common that our engineers develop complete production lines for the manufacturing of complicated products, such as:
Magnetic tape converting lines for the production of ATB-, ATB2- tickets, boarding passes, Iso cards, wallets, parking- and event tickets
Rotary die cutting machine for the production of coasters, in mould labels, wall paper borders, doilies, lottery tickets, cosmetic cotton pads etc.
High capacity machines for the production of folding cartons, hinge-lid cigarette boxes, paper cups, ...
Film and foil punching machines for medical, pharmaceutical and diagnostic products.
If we did not mention your specific application, please contact us and we are sure that we can offer you a solution based on our extensive R & D experience. Please send us your product samples or drawings.
|
|
2 principal lines of material :
The application has the stop
The application moving
All our models are designed by our engineering and design department, and are assembled by our manufacturing unit.
We develop standard and specific systems clearly definite on a schedule of conditions.
|
|
Semi-automatic labeling machines to apply self adhesive labels onto cylindrical items any kind. These machines, very multivalent, allow the labelling of bottles as well as jars, pots, tubes, cartridges, tin cans, however : a large range of products !
Also, these machines may integrate several options :
- For applications with diverse types of detection cells in order to position.
- the labels on the items to be labeled.
- To apply labels up to 30 cm high.
- To apply labels onto items that have prominences ( cans, caps on jars ).
- To apply labels onto cans with handle.
- To apply labels on light or small items
|
|
|
The range of machines offered by CDA to label and capsule wine bottles covers the needs of all small and medium wine production units. From 700 to 2 500 bottles an hour they make your bottles have a perfect look and realy easy. On the machines fitted with a digital touch screen the memorisation of the labeling parameters allows quick changes from one shape of bottle to another, and this without additional tools.
|
|
|
To apply labels on cylindrical items CDA offers a wide range of solutions adapted to every specific need. Our machines are designed for labeling as well as in the F&B industry as in the chemistry or cosmetic industry and can apply any kind of label onto any kind of material. Various types of detection cells and marking devices can be fitted on the machine according to your needs of label positioning and traçability.
|
|
|
|
