|
|
|
|
|
|
The Model 5200 Corner-Wrap Label Printer-Applicator with optional RFID encoding
Weber's Model 5200 Corner-Wrap label printer-applicator combines high-quality label printing with a specially designed label applicator that affixes a single label around the corner of a carton as it travels via conveyor line.
In addition to offering a selection of high-quality label print engines that addresses various print speeds and resolutions, the Corner-Wrap system is available with optional RFID print-encode engines from Zebra Technologies that will satisfy the emerging requirements of today’s supply chain.
Standard thermal/thermal-transfer print engines produce text, bar codes and graphic images at 203- or 300-dpi. The RFID models combine those capabilities with the encoding and verification of RFID inlays to meet the specifications of EPC Gen 1 and 2.
Engineered, manufactured and available only from Weber, the unit prints (or prints and encodes) labels in a next-out mode, automatically removes them from their liner, and retains them by vacuum on a swing arm-mounted tamp pad. As a carton approaches, the tamp pad applies the label to its front panel, then swings around the corner and wipes the remaining portion of the label on its adjacent side.
The Corner-Wrap system handles labels up to 4 inches wide and 12 inches in length, and will print and apply labels to a maximum of 15 cartons per minute delivered at least 24 inches apart at a top conveyor speed of 60 feet per minute.
|
|
Combi FBL
Flat Box Labeler
The Combi FBL saves money and space by eliminating custom printed cases. With the Combi FBL, blank cases can be used for different products and can be labeled with variable information as they are needed.
|
|
SENSITIVE THL
The Sensitive THL is a completely automatic labelling machine, designed to apply vignettes to the top of cartons and trays.
The machine, with its reduced length, is designed for easy application in-line with packaging machines.
The SENSITIVE THL can reach a max. output of 60 pcs/min.
MAIN CHARACTERISTICS
- Labelling head complete with a distribution unit and a label applicator, driven by a stepping motor
- Transport parts automatically synchronized to the requested speed
- Easy size change-over
|
|
|
The Little David LS-500 is the low cost labeling standard. This automatic apply-only label system is both dependable and accurate. The LS-500 labeling system easily integrates into most case/product handling systems and is best suited for situations requiring the application of preprinted labels onto a uniform run of cases/products.
|
|
|
|
|
|
Logomatic 515 B 90
An intelligent labelling system for barcode technology and product identification in industrial operation. It excels through its sturdy machine construction and modular design. The integrated print engine can be used for thermo-direct and thermo-transfer printing and allows real-time labelling with individual data per packaged good or serial labelling in continuous operation for high-speed packaging lines.
Logomatic 901 M
An intelligent labelling system for barcode technology and product identification in industrial operation. Its compact modular design and sturdy machine construction are impressive. The integrated print engine (printing width of 104 mm) can be used for thermo-direct and thermo-transfer printing and allows serial labelling with little change in the data for products whose shape remains the same.
Logomatic 901 T
An intelligent labelling system for barcode technology and product identification in industrial operation. It excels through its sturdy machine construction and modular design. The implementation of the integrated thermo-transfer print engine (a printing width of up to 104 mm) allows real-time labelling with individual data per packaged good.
Logomatic 804 M
High-performance rotary applicator with six hollow section vacuum disks. The labels are blown on in a non-contact procedure during continuous operation. Real-time labelling: Each label can be printed with a different data content at labelling speeds of up 180 cycles/min
|
|
APL 4000 B; especially designed for labelling secondary packaging without contact.
The labelling is done by air blow and ejecting the label. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 4000 R; it is designed to apply labels at the front or the back side of packaging.
The system integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPC global specifications.
|
|
APL 4000 L; automatic label print & apply system especially designed for labelling secondary packaging at average linear speed.
It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
|
|
|
|
Sirius Tamper Evident
Design specifically to apply tamper evident labels to a wide range of cartons. Widely used in the pharmaceutical industry for touch labelling and is fuly validated to those standards. It can incorporate security systems of your choice.
Features
- Motion control system provides increased labelling accuracy coupled with absolute speed matching to cope with variable speed demands of today’s packaging lines
- Enhanced control system incorporating single touch screen user interface provides a very high level of user diagnostics. The unique software enables quick set-up times between product changeover and is self- monitoring to provide optimum reliability. This reduces the skill level required for operation and maintenance
- Fully integrated inspection systems to identify label and/or overprint presence; barcode readability is available and easily incorporated. Also available is the integration of a vision system capable of identifying label position on the product plus the correct lot/expiration data
- Modularised transmission system utilising the latest technology ensures that the Sirius provides the optimum level of flexibility and reliability for all current and future labelling requirements
- Increased cabinet space allows for greater flexibility for future upgrades
|
|
APL 4000 D; system for the identification and double labelling of secondary packaging.
It also offers the possibility to apply and print two adjacent labels on the upper part and/or the side, vertically as well as horizontally. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
|
|
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System.
|
|
| ... products without technical information |
| |
Description
Special technical features of dead-tank design. The distinguishing feature of dead-tank technology is that the interrupter chamber is accommodated in an earthed metal housing. With this arrangement the SF6 gas filling insulates the high voltage live parts of the contact assembly from the housing. Outdoor bushings connect the interrupter chamber with the high-voltage terminals.
|
|
Description
Special technical features of live-tank design: On live-tank circuit-breakers, the interrupter chamber is arranged in the insulator which can be either porcelain or of a composite material, and is at high potential; with the voltage level determining the length of the insulators for the interrupter chamber and the insulator column.
|
|
|
|
|
|
Low voltage moulded case circuit breakers are used for the switching and protection of power supply cables, motors
and other electrical equipment against overloads and short circuit faults. It provides, beside protection function other
functions as remote ON/OFF operation, undervoltage protection, main switch, ...
They are available in range from 16 A up to1600 A in 3 and 4 pole versions.
Advantages:
- Small dimensions,modular sizes
- Possibility of field-instalable accessories - up to 630 AF series 2
- High short circuit breaking capacity (up to 100 kA)
- Fast break mechanism (F.B.M.)
- Reduced energy let throught I2t - minimises thermal stresses
- Reduced tripping time - minimises damage after fault
- Reduced peak short current ampacity - minimised electrodynamic stresses on conductors and
protected equipment
- Installation on mounting plate, 125 AF also on DIN-rail
- Wide range of accessories
- Compact design with high mechanical strenght
- High withstand voltages (8 kV a.c.)
- Voltage level up to 690 V a.c. and 250 V d.c. - only MCCB's with thermal-magnetic triping unit
- Direct opening - recommendation according to standard IEC 60204-1 - up to 630 AF series 2
- Common internal accessories - up to 630 AF series 2
- Visual safety
- Unsurpassed flexibility
|
|
|
SN moulded case circuit breakers are used for switching and protecting low-voltage installations in larger residential properties and business as well as industrial buildings. They ensure reliable protection against overload and short circuits, and can also be used as a main disconnection switch. Rated currents of SN moulded case circuit breakers are in the range from 16 A to 1600 A.
|
|
|
|
|
|
Record Plus™ Thermal Magnetic Trip
3 to 100A. The FC100 and FB100 Record Plus breakers provide a new standard of performance offering multiple levels of interruption capacities, global code approvals, compact size, dual AC/DC ratings, and a broad range of accessories.
Record Plus™ Electronic Trip
125 to 600A. The FG600 Record Plus breaker offers the highest short circuit ratings in the industry, all in a traditional 400A frame.
Spectra RMS™ Electronic Trip
15 to 1200A. These industrial SE150, SF250, SG600 and SK1200 breakers have a digital, solid state, RMS sensing trip system with field installable, front-mounted rating plugs to establish or change the breaker ampere rating.
Thermal Magnetic
15 to 1200A. Our industrial thermal magnetic E150, F225, J600 and K1200 breakers provide a proven, cost effective solution.
Mag-Break® Motor Circuit Protector
Magnetic only circuit breakers. Available in frame types E, F, J, K, and Tri-Break.
Lighting Circuit Breakers
15 to 100A. TEY breakers available with plug-in or bolt-on mounting options.
|
|
|
|
|
|
The majority of distribution systems are designed to an ultimate circuit rating (lcu). An lcu rated MCCB provides the optimum protection in terms of safe and economical selection.
Certain applications may require protection wich is designed to the more onerous service short circuit rating (lcu).
Terasaki's TemBreak Plus range can provide a wide choice of MCCBs with superior lcs ratings up to 85kA at 440V AC.
lcu=o-co 2 full short circuits
lcs=o-co-co 3 full short circuit
All TemBreak Plugin and drawout MCCBs are fitted with a safety trip as standard. If an attempt is made to remove an MCCB while ON it will automatically trip.
The neutral pole of all TemBreak MCCBs are of early make / late break design. This eliminates the risk of abnormal line to neutral voltages which may damage sensitive electronic equipment.
TemBreak MCCBs from 125AF to 1600AF are suitable for isolation as defined by IEC 947-2. Positive Contact Indication (PCI) is achieved via the toggle mechanism. Padlocks can only be installed if the contacts are fully open or closed.
|
|
RCCB Record Plus: FD63/160 frame size
Rated at 160A, the FD63/160 frame size is designed for use in both a DIN-rail environment with modular equipment and in industrial applications. It is supplied with IPXXB terminals suitable for direct connection of one or two conductors totalling up to 95 mm² and is available as a thermal-magnetic breaker, a moulded case switch, and as a magnetic-only motor circuit protector.
The FD63/160 bridges the gap between residential miniature circuit breakers and industrial moulded case circuit breakers.
In compliance with EN 60947, BS, VDE, UTE, KEMA, CEI
3 and 4 pole versions available
FD63 to 63A and FD160 to 160A
Full range of add-on accessories, including:
thermal magnetic/magnetic trip units
auxiliary contacts
completely integrated add-on devices available
rotary handles
electrical operators
connectivity - 60 mm system
|
|
1. General
Meta-MEC MCCBs shall comply with IEC 947-1 and 947-2 standards or with the corresponding standards applicable in the
member countries (EN 60 947-1, 2) :
- Rated operational voltage of 600 V AC (50/60 Hz)
- Rated insulation voltage of 690 V AC (50/60 Hz)
- Suitable for isolation, as defined by IEC 947-2
- ISO 9000 standard.
2. Types & Ratings
- AB type, GB type, UL listed type
- It covers all ratings from 3A to 1600A.
3. Application
- Line protection
- Motor/generator protection
- Starter combination
4. Type of trip unit
- Thermal-magnetic release
- Electronic release
- Hydraulic-magnetic release
- Magnetic release only without thermal trip
5. Certification: KEMA CB certification, CE document of conformity, UL, CCC
|
|
630 A to 3200 A moulded case circuit-breakers
Description
Nominal current from 630 to 3200 A
2 breaking capacities:200kA at 440V - 75kA at 690V for 630 and 800A LB frames
4 breaking performances from 50 to 150 kA at 415 V
Voltage rating:up to 690 V
2 physical sizes from 630 to 3200 A
A single pole pitch of 70 mm
3 and 4-pole versions
solation with positive break indication
4 Micrologic control units enriched by measurement, energy management and network analysis functions
Earth leakage protection built into electronic protection Wide range of common auxiliaries and accessories interchangeable on site
Compliance with international standards IEC 60947-1 and 2, IEC 68230 for type 2 tropicalisation
Compliance with specifications of marine classification companies:Bureau Veritas, Lloyd’s Register of Shipping, Det Norske Veritas, etc.
|
|
|
|
|
|
The TemBreak series offers the models of the 800A to 1600A frames with the breaking capacity up to 125 kA, and this series consists of thermal adjustable type and electronic type that allows you to select the most suitable breaker for your system
Features of the TemBreak Electronic Moulded Case Circuit Breaker:
- Long time delay trip, short time delay trip, and instantaneous trip are available as standard.
- All of long time delay trip, short time delay trip, pretrip alarm, and ground fault trip can be adjusted. The rated current can be adjusted in a range between 50% and 100%. For short time delay trip, ramp characteristics can be selected with the switch to enable selective coordination with lower breakers and fuses.
- The multi-protective device uses the r.m.s. value control. It samples peak current every 0.5msec. to calculate a root-mean-square value. Therefore, harmonics up to 19 th harmonic are accurately detected at 50 Hz to prevent any malfunction from occurring due to harmonics.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
