|
|
High-tech print technology
The performance of the ALX 92x is the best the market has to offer! The ALX 92x realizes a 1:1 print mode, which means that labels are printed and dispensed simultaneously. Therefore, they can be applied to the product directly.
You can`t go faster!
The 64-bit CPU loads images extremely quick. This enables the printing of variable data in real 1:1 applications.
The multi-tasking operating system prepares for the new print of the next label while the former label is still printed.
The ALX 92x runs without downtime. Stops for changing the print jobs are not necessary. The impressive print speed of up to 400 mm/s and the print head resolution of 300 dpi ensure a extraordinary high output and a outstanding print quality, even if small fonts or graphics are used.
|
|
2 models of autonomous saddle jib cranes thanks to a refillable integrated battery :
HALLO EM21:
To pose your labels without efforts at high speed.
Format of the labels minimum:23mm (width of the siliconé support) lx17mm; maximum 52mm (width of the siliconé support) x100mm; with or without removal of caterpillars.
HALLO EM22:
Model more specifically adapted to the labelling of the fruits.
Same design features with the difference of the format of the labels: minimum:23mm (width of the siliconé support) lx17mm; maximum 33mm (width of the siliconé support) x100mm.
|
|
Label Dispensers : LD250
The LD250 is an automatic label dispenser designed to work with rolls of labels up to 4.5" wide. Labels can be easily loaded in a matter of minutes. It is operated by a simple on/off switch. Labels are sensed with an adjustable switch. An optional sharp edge plate is available for more compliant materials.
Benefits:
Increase productivity
Rugged design makes it suitable for use in any semiautomated environment
Can be easily carried from location to location with a
convenient handle
Features:
Photoelectric sensor precisely positions each label
Sensor ensures label will be consistently and reliably positioned without wear or need for adjustments
Eliminates need for mechanical senors that rely upon label stiffness to activate
A built-in redundancy feature is included to permit operation even without the sensor
Can accommodate a variety of labels up to 4 inches wide and 4 inches long
Runs at a speed of approximately 2 inches/second
Includes a removable, disposable reel to hold the stripped-off waste material
Plugs into any normal 110v AC wall outlet
Stands 6" x 18" x 13" and weighs 19.25 pounds
A fixed position, built-in scanner confirms the readability of the bar code
Scanned information can be transmitted to host
Data scanned can be sent to next scanner on-line
|
|
Distributor of labels width 140mm.
Label : format min. : 10mm x 15mm; max. format : 140mm x 200mm.
Speed: 5m/mn.
The advance of the label is regulated by switch.
Side adjustment of the cell.
This model also exists in width 200mm.
|
|
| ... products without technical information |
| |
The 2800 Series positive displacement dispensers are ideal for applying uniform amounts of two-part epoxies and other fluids that change viscosity over time.
Compressed air is not required%u2014instead, these electrically operated units use stepper motors and patented technology to advance and retract a piston inside the syringe barrel. They will produce accurate, repeatable deposits, regardless of changes in fluid viscosity or temperature.
|
|
EFD's Ultra® 2800 Dispensing System is perfect for applications that require precise metering of assembly fluids with changing viscosity or where a specific flow rate is necessary.
The system features a unique, patented technology that gives the user precise, repeatable results %u2014 regardless of changes in fluid volume, viscosity and temperature. This technology eliminates the need to adjust settings throughout the syringe barrel dispensing cycle, including the need to compensate for changes in fluid viscosity.
The 2800 System is electro-mechanically operated and does not require the use of compressed air. A powerful stepper motor is contained in the benchtop controller, keeping the handheld drive cable lightweight and easy to use .
|
|
DX-250 is a system types them for the dosage of the fluid of any degree of viscosity. Precise and poured it offers them the possibility memorizzare until to 10 various programs, concurring reproducing sequences of points or lines of dosatura with accuracy and repeatability. It includes the regulation of the empty one in order to eliminate the problem of the gocciolamento during the dosage cycles.
Modern and winning the design is studied in order to occupy minor the space possible on the work bank and also in order to concur the impilamento more unit over the other. An advanced system of management of the presisone and the empty one, bound together to the timer types them, assures consisting and ripetibili dosages reducing remarkablly the waste of materials.
Available in 2 versions in order to operate to various pressures of exercise: 0 -100 psi for applications of general character and 0 - 15 psi (model DX-255) for specific applications with fluid to lowest viscosity. The systems are ready to the use in any part of the world thanks to the power supply universal and are supplied with the accessories.
Systems DX can control the following valves:
Valves to crushing of tubetto
Bobbin valves and miniums bobbin
Needle valves and micro needle
Diaphragm valves
|
|
KOLA Tape dispenser is designed for more productive uses: gift wrapping, cashier, and in various other shops.
There are 2 funcitons:
(1) Cut many tapes at once - same length (by turing the handle)
(2) Cut tapes Manually - any length (by pulling the tapes by hand)
It is becoming more important to have more convenient and productive operations in our workplaces, and our tape dispenser will help gaining higher productivity!
Please do not hesitate to contact us for more information.
|
|
|
Hot melt adhesive feeders automatically transfers hot melt adhesive from a bulk container to the adhesive supply unit increasing productivity and reducing equipment down time by keeping the adhesive supply unit full.
|
|
752V Series
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
Cold glue feed units are designed to supply applications guns, by a pneumatic piston pump with ratio 4:1 or a diaphragm pump .
The pump is fitted on a plastic cover and it is easy to transfer on a bucket with water to flush the system.
The feed unit is provided with a stainless steel filter, that cut the pulsation of the pump.
A stainless steel pneumatic pressure regulator controlled by an I/P transducer keep automatically constant the glue quantity at every speed.
|
|
2400 Series dispensers bring exceptional process control to a wide variety of benchtop dispensing processes where adhesives, lubricants, silicones, epoxies and other assembly fluids are applied.
By using a digital timer and a precision air regulator instead of operator judgement to control the amount of fluid applied, 2400 Series dispensers make it simple to produce uniform dots as small as 0.004 inches in diameter, apply neat controlled beads, or fill cavities with identical volumes of material
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our offer:
Cartridge dispensing machines
Quasi volumetric dispensing machines
Tank dispensing machines
Special dispensing machines
Accessories
|
|
|
ITW Dynatec's Manual Adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply hose. Temperatures are controlled by the controller at the adhesive supply unit.
|
|
EFD's new Ultra® 2400 workstation is a precision dispensing system that applies accurate, consistent amounts of adhesives, lubricants, silicones, epoxies and other fluids used in benchtop assembly processes - from neat, controlled beads to uniform dots as small as 0.004 inches in diameter.
Several accessories are available to enhance productivity and customize the Ultra 2400 workstation for different applications. Options include a flexible task light, a 1.7X magnifier for precision closeup work, a flexible syringe barrel holder that acts as a convenient "third hand," and an ergonomic barrel grip with a touch-sensor finger switch and LED spotlight to illuminate the dispensing area.
Standard features include
- Simultaneous digital display of dispense time, air pressure, vacuum, shot count and mode, for greater process control than standard analog gauges
- A unique internal pressure reservoir that reduces cycle time and improves deposit control
- Multilingual display in English, German, French, Spanish, Italian, Chinese, Korean and Japanese
- Automatic voltage regulation from 85 to 265 volts, with universal power plugs
- Automatic U.S./metric conversion of all dispensing parameters
- Security lockout with tamper-proof password control
|
|
|
ITW Dynatec's APEX High Speed Slot Die Applicator is an air-operated hot melt adhesive applicator assembly with an optional filter manifold. The applicator is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs). APEX models are offered in six different module configurations.
|
|
Pneumatic bead gun provides production versatility for contact and non-contact, high- or low-pressure cold adhesive operations, including packaging, corrugated, bag and sack, converting and product assembly applications.
- Reduce nozzle dripping with reverse-needle stroke action for clean cutoff.
- Improve pattern uniformity with integrated needle and seat design that provides consistent adhesive flow.
- Speed setup with vertical micro-adjust control for critical gun positioning.
- Meet diverse pattern requirements with coating width up to 100 millimeters (3.94 in.) for contact coating, and nozzle diameters ranging from 0.3 to 1.5 millimeters (0.012 to 0.059 in.) for non-contact delivery.
|
|
The Heavy-Duty Adhesive Dispensing for Plexus Adhesives!
Designed for Maximum Performance, and Minimum Downtime
With decades of research and hands-on experience,
Plexus designed FusionMate™Dispensers for the most
demanding adhesive dispensing applications.
FusionMate Dispensers are specifically optimized
for Plexus methacrylate adhesives. Their heavyduty
design ensures years of consistent, reliable,
trouble-free service. Since most components can
be purchased off-the-shelf from industrial supply
houses, any maintenance or repairs can be performed
faster, more easily, and less expensively
than on competitive machines.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
