|
|
LD5500 5" (127mm) WIDE - ELECTRIC LABEL DISPENSER "HIGH SPEED"
- Ideal for long packaging type labels
- Automatically peels and advances labels
- Photosensor accuracy and reliability
- All metal construction
- High torque motor for heavy rolls of labels
- Will dispense labels from .25" to 5" (6mm to 127mm) in width
- Will dispense labels from .5" to 12" (13mm to 305mm) in length
- Will dispense labels and die-cut parts
- Adjustable strip plate for hard-to-release labels
- Will accommodate core sizes of 1" (25mm) and 3" (76mm)
- Can dispense paper, polyester, vinyl, acetate, foil, etc.
- Automatically rewinds liner scrap for a cleaner working environment
- Liner scrap is easily removed
- No tools required for adjusting to different size labels
- No maintenance required
- For clear labels, please select model #LD5500C
|
|
Features:
- Heavy duty clutch brake.
- Variable speed.
- Photoelectric label sensing.
- Optional start and stop delay.
Specifications:
- Dimensions: 19.5"W x 21" D x 22.5"H.
- Speed: Up to 1200" Per Min.
- Web width: up to 6.5"
- Label roll capacity: up to 12"OD
- Electric: 120 VAC= +/-10%.
|
|
LDM080 Manual Lever Label Dispenser
- Heavy-duty manual feed label dispenser with hand lever
- Up to 3.15" (80mm) in width
- Dispenses from 0" to infinity in length
- Dispenses labels with one hand stroke
- Adjustable stroke to dispense labels at proper length
- Works with die cut and butt cut labels
- Made in the U.S.A.
|
|
Easy label dispensing…
The label dispensers MR113 with electric drive are a reliable, convenient and cost-efficient solution for dispensing selfadhesive labels on rolls.
A microswitch and a synchronous motor ensure fast and
smooth label dispensing.
The labels are peeled off the backing paper and held ready for manual application. As soon as a label has been picked off, the next one is automatically advanced.
For an optimum workflow at manual packaging workstations and sales counters!
Your benefits:
- Fast and smooth label dispensing
- Automatic label peel-off
- Transparent labels possible
- Easy to move
- Small and compact
- Simple handling
- Flexible thanks to fast label change
|
|
Easy label dispensing…
The manual label dispensers from MR are a convenient and cost-efficient solution for dispensing selfadhesive labels on rolls.
By pulling the backing paper forward, a label is peeled off and is ready for application.
Decorative labels or special offer labels are easily dispensed in this way wherever you are – at manual work stations, counters, booths or other points of sale.
Your benefits:
- Easy to move
- Small and compact
- Simple handling
- Fast label change
- Quick and easy label peel-off
- According to size: up to five label rolls in one dispenser
|
|
HERMA 100 - manual dispensers
The convenient HERMA 100 manual label dispenser is ideally suited for low volume applications. Efficient and easy to use, it offers a very economical solution for small batch hand labelling. The units are widely used where the investment in automatic labelling machines cannot be justified, for example in post room environments and despatch areas.
Reel width: 80mm and 160mm
|
|
2 models of autonomous saddle jib cranes thanks to a refillable integrated battery :
HALLO EM21:
To pose your labels without efforts at high speed.
Format of the labels minimum:23mm (width of the siliconé support) lx17mm; maximum 52mm (width of the siliconé support) x100mm; with or without removal of caterpillars.
HALLO EM22:
Model more specifically adapted to the labelling of the fruits.
Same design features with the difference of the format of the labels: minimum:23mm (width of the siliconé support) lx17mm; maximum 33mm (width of the siliconé support) x100mm.
|
|
Distributor of labels width 140mm.
Label : format min. : 10mm x 15mm; max. format : 140mm x 200mm.
Speed: 5m/mn.
The advance of the label is regulated by switch.
Side adjustment of the cell.
This model also exists in width 200mm.
|
|
| ... products without technical information |
| |
|
Models with max output power from 35 kW to 500 kW. EKOHEAT induction heating systems for 5-15 kHz range provide reliable and repeatable solutions for heating with large coils or for heating larger parts. Among the many typical applications are heating of hard-to-couple parts, deeper heat penetration, crystal growing, heat treating steel, preheating for forging of steel, aluminum, copper or brass, and melting in crucibles.
|
|
|
The EKOHEAT Compact model is versatile, rugged & easily integrated into existing manufacturing cells. The power control system delivers output power from 100 W to 15 kW with 100% duty cycle at output frequencies from 50 to 150 kHz, CE marked with a wide range of standard features & functions. Ambrell’s new AutoTap technology is used for challenging applications where steel is heated through Curie temperature, automatically adjusting for the varying electrical load during this transition.
|
|
Performance:
The CXH series of hybrid, high frequency power supplies is designed to operate at a fixed frequency over the range of 2 to 40 MHz. The rugged amplifier design is well suited to demanding industrial applications where stability and reliability in the presence of erratic loads is required. The solid-state driver section features microprocessor control for precise power control and diagnostic monitoring.
Applications:
The CXH series of high power supplies provides stable, reliable RF power for industrial heating applications including drying, plastic welding, silicon crystal growing and flat panel.
Features:
Standard power ranges: 15kW, 25kW and 50kW
Rugged, reliable design for years of trouble-free operation
Simplified operation through microprocessor- controlled user interface
CX series solid-state driver requires no tuning or adjustments
Water cooling increases tube life by reducing thermal stress in high VSWR mismatched loads
RS-232 package standard
ETL Mark on CXH 25kW
|
|
|
|
|
|
STATIPOWER SP11 Induction Power Supply
Features/Benefits
* 50-200 kHz with a wide range of power outputs for application flexibility
* Continuous or intermittent duty
* 100% solid state design. Ideal replacement for less efficient oscillator tube power supplies
* High, 0.95 input power factor under all operating conditions
* ±1% output regulation accuracy with ±10% line variance under all operating conditions
* Single control board for reliable operation and simplified maintenance
* Analog display of voltage, frequency, current and output power. Built-in digital heat timer
* Optional RS-232/485 interface for automatic operation under computer control
* Built-in load matching capacitors and variable ratio isolation transformer
* Built by the world's largest designer and manufacturer of induction heating equipment
The STATIPOWER® SP11 is a self-contained, stand-alone solid state transistorized power supply for heating a wide variety of parts. Application capabilities include hardening, tempering, brazing, soldering, melting, bonding and shrink fitting. A broad range of single-turn and other low impedance heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer.
|
|
|
|
|
|
STATIPOWER SP5 & 7 Induction Power Supply
Features/Benefits
* Multiple power/frequency combinations for application matched performance
* "Bullet-Proof" circuitry eliminates nuisance shutdowns and restarts
* Voltage fed for 0.95 input power factor over full operating range
* Output regulation by voltage, power or current. Jumper selected
* Single control board. Field replaceable for easy maintenance and trouble shooting
* Interchangeable control board. Factory calibrated to eliminate field adjustment and calibration
* Modular, single-layer design for easy access and maintenance
* Pressure switches on all capacitors to shut down system before complete capacitor failure
* Built-in annunciator panel for simplified status/fault diagnostics
* < 85 dB operating sound level for quiet operation
Job-Matched Induction Heating Power Supplies:
STATIPOWER® SP5 & 7 water-cooled, solid state power supplies are designed for case hardening, through hardening, annealing, mass heating and many other applications. Power and frequency combinations from 10 to 1,300 kW/1 to 25 kHz are available in single and dual frequency models.
|
|
MF and RF generators for inductive heating processes
Induction Heating - briefly illustrated
Induction heating is based on the physical effect that most electrically conductive materials heat very quickly and efficiently when exposed to a high frequency magnetic field. By induction, energy can be rapidly and precisely transferred into the work piece without physical contact with the heat source. HÜTTINGER’s induction generators provide robust, reliable and stable performance even in the harshest of production environments. Our animation shows the principle of induction heating process.
|
|
| ... products without technical information |
| |
Pistol-Grip Attachment allows paste to be applied manually to copper and brass assembly
Compressed air from control panel is introduced to upper gun body, forcing circular piston and attached piston rod upward against coil spring. Pressurized paste alloy (from reservoir) fills vacant space between piston rod tip and nozzle orifice.
As timer de-energizes, compressed air is exhausted, and coil spring returns piston and rod to closed position. Piston rod tip displaces paste alloy through nozzle orifice and seals opening until next cycle. Precise deposit size is obtained by adjusting control panel timer, paste pressure, and length of piston rod stroke.
|
|
Satellite Paste Applicators are designed to complement an existing heat source, such as furnace or induction. These freestanding units apply single, multiple, or "ring shape" paste deposits onto assemblies. Cycling is automatic and error-free with an operator removing the pasted part and loading it into the adjoining heat source.
Applicator guns can also be mounted to a robot to apply a detailed combination of paste dots and stripes to a particular part. After the pasting cycle, the part is joined to its companion members and fixtured to the subsequent heating and cooling sequence.
Dual station system utilizes rotating mandrel technique to apply 360° stripe of Fusion Paste onto part joint area.
|
|
SPECIAL
This product line gathers all automated or semi-automated systems, designed and built for complete or partial applications, on specific request for custom equipment, syandalone or integrated.
|
|
ECO
Micro-jet dosing systems for:
- lubro-cooling substances for processes like shearing, drawing, drilling, tapping, cutting, etc.
- lubrication of particular kinematic mechanisms and/or components
Products: lubricating oils, evaporable oils, cooling liquids, detaching fluids, protective coatings, etc
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
