|
|
APL 7000 L/R ; for labelling one side of the pallet or secondary packaging.
Label print & apply system especially designed for labelling one label per application cycle, having the possibility to use a big size label (150x210mm) for secondary packaging at average linear speed. For upper side, side and bottom applications (APL 7000L model) and for front applications with a rotating actuator (APL 7000R model). Fits a print & apply system which fits a 4" or 6" printing motor with the best units in the market: DATAMAX, SATO or ZEBRA. High resolution of 203DPI or 300DPI.
It's always necessary to stop the product to apply the label.
|
|
APL 4000 L; automatic label print & apply system especially designed for labelling secondary packaging at average linear speed.
It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 4000 B; especially designed for labelling secondary packaging without contact.
The labelling is done by air blow and ejecting the label. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
APL 4000 R; it is designed to apply labels at the front or the back side of packaging.
The system integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPC global specifications.
|
|
APL 8000 Series; Self-adhesive labels real time print & apply system for pallets 1, 2 or 3 sides labelling of a pallet.
Designed and manufactured in accordance with the traceability standards for the entire delivery and distribution chain. It complies with the GS1-128 standards as well, as well as with the GS1 International pallet labelling recommendations. A print & apply system which allows the integration of a 6" printing engine with the best print engine units in the market: DATAMAX, SATO or ZEBRA. High resolution of 203DPI or 300DPI.
|
|
APL 4000 C; it is designed to apply labels in corners on secondary packaging, labelling two adjacent sides with one label.
The system contains a soft foam brush or cylinder, used to perfectly apply the label in a 90º angle. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPC global specifications.
|
|
APL 4000 D; system for the identification and double labelling of secondary packaging.
It also offers the possibility to apply and print two adjacent labels on the upper part and/or the side, vertically as well as horizontally. It integrates these printing engines: DATAMAX, SATO or ZEBRA. For high volume label applications, it allows the user to simultaneously encode data and printed information on an intelligent label with a RFID chip, in accordance with the EPCglobal specifications.
|
|
|
APL-ELV; self-adhesive labels real time print & apply for diverse heights pallets labeling as well as automatically label different heights within the same pallet. It allows selecting the printing and application of each label on different sides of the pallet, with irregular predefined heights. Equipped with an auto-brake, it assures a perfect label placement. Up to three labels per pallet and printing characteristics according to the standard APL model.
|
|
|
|
|
|
Characteristic advantages
- Display
The display supports different languages, so the system is ideal for installations on multi-national basis. The movable display can be brought into each position – so that fits best to the angle of the machine within the production line. Messages are readable at any time.
- Print head
The user can easily change the print head without any problems – or tools. The pre-setting of the print head guaranties an excellent print quality.
- Standards
19 fonts and all standard barcodes are included in the standard functionality of the ALX 92x. A compact Flash Card can store additional fonts or logos.
- Sensor
It is easy to adjust the position of the label path sensor of the ALX 92x - without stopping the system. The selection adjustment shows the position of the sensor additionally. The user is enabled to place the sensor in the middle of the path according to the pattern of the labels.
- Dot-Check
The integrated dot-check gives a warning even if only one single dot is missing and avoids errors absolutely reliable.
- Automatic foil saving
The automatic foil saving function uses all non-printed larger areas, and guarantees that foil is used most efficiently
|
|
Q31 Compact
- Low cost
- Compact
- Microprocessor controlled
- Low profile
- Economical design
- Pneumatic options for side, top, leading panel, adjacent side or corner wrap applications
|
|
|
|
|
|
The model 150 provides fully automatic labeling capabilities for improved productivity. It is ideal for pressure sensitive label application of pre-printed UPC or other barcodes and spot labels but can handle an assortment of label sizes and shapes. Top, bottom and label applications are easily accomplished with the unique angled U-Arm for easy positioning of the applicator hear to the product.
While the 150 is an economical machine, it is a rugged industrial-duty applicator that accurately (+/- 1/16”) applies pressure sensitive labels at the rate of 100-250 per minute depending upon label size. The synchronous drive of the 150 provides low maintenance, dependability and durability.
The anodized aluminum construction of the 150 provides protection from corrosive environments. With the ambidextrous LH and RH design, added flexibility is obtained and allows for change over in the field. The simplistic design results in minimal downtime, easy fault diagnosis as well as minimal parts inventory.
|
|
Q33 RFID Ready
- High performance RFID-ready printer applicator
- Labels various products, shipping cases and pallets up to 100 ppm
- All quick disconnect electronics and pneumatics
- Uniquely suited for the most demanding applications
- Apply-only module can be configured to apply preprinted labels using a standard tamp or wipe on
- Pneumatic options for side, top, leading panel, adjacent side or corner wrap applications
|
|
Universal Print & Apply (UPA II) Printer Applicator is leading edge technology in product identification.
The UPA II features:
- Easy-to-use operator touch screen.
- Programmable Logic Controller (PLC).
- Quick change tamp head.
- Removable tamp assembly for easy access to print engine.
- Proximity "smart head" sensor.
- Product on delay.
|
|
AEW Delford Systems has extended its range of labellers with the addition of the C3 Panel Label Applicator. This robustly built, user-friendly Label Applicator offers wrap around labelling of self-adhesive labels onto two or three sides of a tray or container.
The pack is driven through the conveyor by powered side belts and a unique brush wiper assembly ensures 100% adhesion of the label onto the pack.
The C3 Panel Label Applicator applies pre-printed labels. When a thermal transfer printer is incorporated additional information, such as bar code, sell by and nutritional details, can be put onto the label prior to it being applied to the pack.
The C3 can also be interfaced to a weigh price labeller or with AEW Delford System’s integral weighing unit, where variable information on a pack by pack basis, is forwarded to the C3 panel labeller and information is printed accordingly.
|
|
FAST Tag In-Motion is a turnkey automated solution for placing, tracking and verifying RFID tags on cartons and pallets. FAST Tag In-Motion integrates seamlessly into existing material handling and data handling systems, providing a low-risk upgrade path from conventional bar code labeling systems.
This solution is driven by Accu-Sorts FAST Tag software foundation, which provides localized edgeware for control, configuration, data management and reporting. As part of Accu-Sort's Tag-to-Ship" centralized system architecture (shown on next page), FAST Tag In-Motiong seamlessly integrates with you existing data management infrastructure through Accu-Sort's FAST Tag DataServer solution, making it scalable as your needs grow in the future.
|
|
| ... products without technical information |
| |
CB 128 100/200; alfphanumeric high resolution solvent inkjet marking systems.
Especially projected to print directly on non porous surfaces.
Developed small character marking up to 17mm high.
The CB 128 is offered in two different ink cartridges: 100ml or 200ml in order tomeet different application demands.
|
|
KOSIJET 7V/16V; Macrocharcter Inkjet printing system.
Kosijet, macrocharacter Inkjet marking system developed for alphanumeric printing on porous surface. D.O.D Inkjet printing system designed to identify through alphanumeric characters all type of secondary packaging systems.
System based on D.O.D. technology, developed for marking porous surfaces from 21mm (Kosijet 7V model) up to 48mm (Kosijet 16V model) and created for those installations with a low and interrupted production volume.
Capable to print up to 80 meters/minute, from 21 to 48mm printing height.
Big capacity Ink system, quick replacement without stopping the production line.
|
|
Hitachi Ink Jet Printers clearly print small and micro characters on rough, bumpy, soft and brittle surfaces without affecting the shape, material, line speed, angle or the position of a product or package.
Applications/examples :
Printing of lot numbers on cosmetics /electronics parts.
Printing of manufacturing date for rice packaging/can drinks/bottle.
Printing of specifications in production line of waterworks hose/pipes.
|
|
|
UMS Ltd supply the Paint Jet 4003 series range for marking a dot, series of dots or continuous line from 5mm to 40mm wide onto the surface of static components. It is often used to show if a component has passed or failed an inspection or test.
|
|
Q33 RFID Ready
- High performance RFID-ready printer applicator
- Labels various products, shipping cases and pallets up to 100 ppm
- All quick disconnect electronics and pneumatics
- Uniquely suited for the most demanding applications
- Apply-only module can be configured to apply preprinted labels using a standard tamp or wipe on
- Pneumatic options for side, top, leading panel, adjacent side or corner wrap applications
|
|
B-SX4 Industrial Printer
- RFID ready
- Technology: Thermal transfer / direct thermal
- Resolution: 8 dots/mm (203 dpi)
- Printing width: max. 104 mm
- Printing speed: up to 254 mm/s (10 ips).
|
|
FAST Tag In-Motion is a turnkey automated solution for placing, tracking and verifying RFID tags on cartons and pallets. FAST Tag In-Motion integrates seamlessly into existing material handling and data handling systems, providing a low-risk upgrade path from conventional bar code labeling systems.
This solution is driven by Accu-Sorts FAST Tag software foundation, which provides localized edgeware for control, configuration, data management and reporting. As part of Accu-Sort's Tag-to-Ship" centralized system architecture (shown on next page), FAST Tag In-Motiong seamlessly integrates with you existing data management infrastructure through Accu-Sort's FAST Tag DataServer solution, making it scalable as your needs grow in the future.
|
|
●Analysis acceleration, velocity, and displacement
●For checking of unbalance, misalignment, bearings and gears
●Large memory of 100 results and 10 frequency spectrograms
●Includes a hand-held accelerometer probe with a removable magnetic base
●Rechargeable battery
●Large LCD display all functions and parameters
●Upper and lower limit setting and sound alarm
●Printer included
|
|
| ... products without technical information |
| |
|
|
|
|
Fully Automatic Spot and Full Coater and Curing System
This machine is a kind of high & new product integrating light, machinery and electricity with pneumatic. This machine can do full & Spot UV. Varnish on thick and thin paper at the speed of 6000 sheets per hour. Conventional varnish or water base varnish can also be use on this machine. This machine includes all recent technological solutions for easier use and to increase productively.
FULLY AUTO UV. SPOT & FULL COATING MACHINE
1. Fully automatic one machine for coating full and spot UV. Varnish on Paper and Board.
2. Totally Indigenous Machine suitable for India condition and operators.
3. High speed Maximum 6000 Sheets per hour with accurate registration on spot jobs and high gloss on full jobs.
4. Different type of Paper and Board can be coat.
5. Can abe used afor high gloss UV., water base and solvent base varnish and heat sela lacquer.
6. Machine is equipped with automatic cylinder On/Off by pneumatic control systems.
7. Convenient plate cylinder positioning for fast nylon plate change.
8. Suitable for both flexo plate and rubber balnket as coating media.
9. Precisely constructed wtih four Roller coating heads for spot and full sheet coating.
10. Powder removing device is optional.
11. Auto delivery unit is optional.
|
|
The e2K is an inexpensive bomb calorimeter system which is language compatible and suited to both the lower sample volume and higher sample volume markets. The e2K is available in a variety of system options to suit different customer budgets.
The main feature of the new e2K is the determination speed which has been increased to that of the CAL2k making it faster than the ECO with the same speed and accuracy of the CAL2k. Another main feature of the new e2K is its language compatibility; the LCD display can be read in one standard language (English) and one alternative language such as. The new e2K also has the ability to print results directly without a PC on a standard 80 column serial printer. These are just some of the features of the new system.
|
|
| ... products without technical information |
| |
manual precision stencil printer S10:
- Technical data
Frame size:
- max. 550 x 470 mm
- Rapid tensioning frame - 4 fold
- another types of frames may be accepted
PCB size:
- max. 400 x 375mm
Printing area:
- max. 400 x 360 mm
Squeegee:
- Single manual - metal or rubber blade
Printing:
- Single or double-sided boards
Table lowering:
- automatic table lowering / Z=10 mm
- lowering speed adjustable 0,2 - 4 mm/s
- adjustable table contact pressure 0 - 450 N
Table - X, Y / Theta adjustment:
- +/- 12 mm / +/- 2,7°
Off-Contact (Z-Axis) Range:
- 0 -24 mm
Table - adjustment accuracy:
- +/- 0,01 mm
Supply:
- Compressed air 6 bar
Dimensions and weight:
- 860 x 650 x 280 mm / 55 kg
Application area:
- suitable for small and medium volume production
- screen- or stencilprinting of glue solder paste or another substances
- qualified for fine pitch components
- minimum pitch of pads 0,4mm
|
|
|
|
|
|
Frame size:
- max. 584 x 584 mm
- Rapid tensioning frame - 4 fold
- another types of frames may be accepted
PCB size:
- max. 440 x 440mm
Visionsystem:
- Integrated 2 CCD cameras
- LCD monitor
Visionsystem:
- 2 integrated kameras
- LCD monitor
Squeegee drive:
- electric drive control
- print speed 5-150mm/s
- freely programmable squeegee travel
Squeegee changeover:
- Automatic reversible dual squeegee
- Universal holders for metal or rubber blade
- adjustable squeegee inclination 0 - 60 °
- adjustable squeegee contact pressure 0 - 200 N
Printing:
- Single or double-sided boards
Table lowering:
- automatic table lowering / Z=10 mm
- lowering speed adjustable 0,2 - 4 mm/s
- adjustable table contact pressure 0 - 450 N
Table - X, Y / Theta adjustment:
- +/- 12 mm / +/- 2,7°
Off-Contact (Z-Axis) Range:
- 0 -24 mm
Table - adjustment accuracy:
- +/- 0,01 mm
Supply:
- Compressed air 8 bar
Dimensions and wight:
- 860 x 750 x 450 mm / ca. 95 kg
Application area:
- suitable for small and medium volume production
- screen- or stencilprinting of glue, solder paste or another substances
- qualified for fine pitch components
- minimum pitch of pads 0,3mm
|
|
|
|