|
|
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
Permanent identification sleeves
Computer printable
Excellent print performance
Configured for ease of kitting
Good chemical and solvent resistance
3:1 shrink ratio
CSA Certified, UL Recognized
|
|
TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements.
Made from durable, flame retardant, radiation crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications.
All TMS-SCE meet the performance requirements of SAE-ASM-DTL-23053/5 class 1.TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-23053/5 classes 1 and 3. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAEAS81531 4.6.2 and MIL-STD-202 both before and after shrinking.
|
|
PHZ
- Flexible zero halogen thin wall polyolefin heat shrink tubing for marking on site.
- Excellent properties of fire safety characteristics.
- Low smoke generation and evolution of acid gases.
- Flexible and easy mounted on cables and wires.
- 2:1 shrink ratio.
- Reduced overall assembly and marking costs on site when using Partex marking machines and software.
|
|
BRADY`s large selection of wire and cable marking products allows you to choose the identification solution that best meets your requirements. We also offer a wide range of custom materials for wire marking labels that are manufactured to your exact specifications.
Blank labels, sleeves and tags that can be printed using a variety of print technologies
|
|
The Smart Label Printer from Seiko Instruments USA can print a variety of over 40 different labels and papers.
One possibility we show here is to label cable or jewellery. This special label is formed as a butterfly and can be labelled on rings, watches, cables, etc to mark them for inventory or pricing matter.
The spceification is SLP-JEWEL.
|
|
|
HellermannTyton's ShrinkTrak 3:1 ratio heat shrinkable markers make it easy to identify wire and cable. The ladder-style function has been designed to enhance the user's ability to pick markers off the carrier.
|
|
Plain Durable
Laser Printable Labels
Durable Laser Printable Labels For All Laser Printers
* Widest range of durable labels
* Choose from over 3,500 material/size combinations
* Small, convenient pack pricing
* Volume discounts available
* Software formatting instructions provided
|
|
|
HellermannTyton’s ShrinkTrak 3:1 ratio heat shrinkable markers make it easy to identify wire and cable. The ladder-style function has been designed to enhance the user’s ability to pick markers off the carrier. The side slits have been specifically designed to ensure that the wire entry gap is as large as possible whilst remaining on the carrier strip. This enables the user to quickly insert wire and cable into the marker. For a complete labelling solution, ShrinkTrak can be printed using HellermannTyton’s TagPrint Pro professional label creation software, thermal transfer printers and ribbons to create a permanent print which is resistant to most solvents when shrunk and applied.
|
|
Marking rings PC 10
Application range
These open marking rings are suitable for labelling cables before and after installation.
They can be clipped onto the cable easily and quickly.
The shape ensures secure affixing to the cable, while the anti-rotation feature ensures secure combination marking.
Marking after assembly
|
|
BRADY`s large selection of wire and cable marking products allows you to choose the identification solution that best meets your requirements. We also offer a wide range of custom materials for wire marking labels that are manufactured to your exact specifications.
Blank labels, sleeves and tags that can be printed using a variety of print technologies.
|
|
FLEXIMARK® Marking systems
The diverse marking systems for simple, lasting, clear marking.
Manual or electronic marking.
For cables, single cores or switch cabinet marking.
In plastic or stainless steel for a harsh environment.
FLEXIMARK® is a registered trademark of the
Lapp Group in many countries, and the genuine product is therefore only available from Lapp.
|
|
CM-SCE markers are flat, rigid, non-adhesive labels that can be
used to identify large cables and wire bundles in environments
such as military and aerospace. Marker tags are applied to cables
or wire bundles with cable ties.
Print performance meets or exceeds the requirements of
SAE AS81531 4.6.2 and MIL-STD-202.
Features and benefits:
Side entry provides access to big size and wire bundles
as well as retrofit and repair capability
Highly flame-retardant
Highly resistant to abrasion, mechanical abuses, fluids,
lubricants and solvents
Ease of use: markers can be easily removed from the carrier
Easy installation: only standard cable tie-wraps
are needed to install markers. No extra steps required
Excellent print perm
|
|
PA
- Closed, permanent grip and adjustable marking sleeve for as yet unconnected wires.
- Unique profile with spring-action bellows coverswide diameter range.
- Withstands hostile environments and has excellent legibility.
- Correctly chosen size allows fast installation.
- Twist-protection for secure combination marking.
PAZ
- Single-character, halogen free combination marking for as yet unconnected wires.
- For applications including electrical engineering, pneumatics and hydraulics.
- Unique profile with spring-action bellows covers wide diameter range.
- Twist-protection for secure combination marking.
- Excellent legibiligty.
|
|
• Fast mounting with easy breakoff cards with precut or moulded marker tags.
• Easily detachable tags are put directly into PARTEX various tag holder systems.
• The hard tags can be rapidly mounted, before or after connecting the wires and cables.
• Easily printable in the X-Card MK3 printing machine with high production rate.
|
|
Plain
Thermal Transfer Labels
Durable Thermal Transfer Labels For All Thermal Transfer Printers
* Widest range of durable labels
* Choose from over 4,500 material/size combinations
* Small, convenient pack pricing
* Volume discounts available
* Ideal for pre-production evaluation
|
|
Quality
The self-adhesive markers are made from polyester film, laminated with a crystal clear polyester over-laminate. This over-laminate has a very high resistance to chemicals, ultraviolet rays and extreme weather conditions
Flexibility
All markers are available per card, even customized markers made within the standard colour and size parameters. You can save money on large orders by combining different legends within the same size.
Standardisation
By using Brady markers to identify the pipes within your company, you can rest assured that the results will be both uniform and in accordance with the Health and Safety Regulations
|
|
Terminals, Lugs, Connectors, Markers & Heatshrink
For over a century, Thomas & Betts has been a leader in providing a broad range of connectors suitable for the majority of all electrical applications. In fact, the high quality, easy-to-use, versatile connectors from T&B have continually helped define the standards used throughout the electrical industry. T&B's family of products includes many of the most-requested brands in the industry including Color-Keyed®, Sta-Kon®, Spec-Kon™ , Shrink-Kon®, Snap-N-Seal®, Elastimold®, Blackburn®, and Marr®. Whatever the application - commercial, industrial, OEM, utility, residential, communications - and whatever the voltage - low, medium or high -- we have the right connector for you. If we don't have it, we'll custom design and manufacture products specifically suited to your application!
|
|
PKS M1
- Stainless steel marking system with combinable single-character markers.
- The markers can be put together and threaded over the plate.
- The plates are easy to mount on the cable with stainless steel cable ties.
- The individual markers can also be fixed in place on the plate with pliers.
- Acid-resistant stainless steel for aggressive environments and high resistance to fire.
PKS M2
- Complete marking system for cables, hoses, pipes and components.
- Single-character and multiple-character markers which can be combined on site.
- Made of acid-resistant stainless steel for aggressive environments and resistance to fire damage.
- Easy to mount with steel cable ties.
- Marker information can be transferred via CAD, floppy disk, modem or tables, for customized production on one single marker plate.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
