|
|
|
|
|
|
All you need is here
epMotion automated pipetting systems will make you see things in a new light. Whether it's sample or reagent transfer, assay set-up or nucleic acid extraction, all your routine pipetting tasks will be automated with more precision and safety than you ever experienced before with manual pipetting. With four models, two instrument sizes and multiple pipetting deck combinations to choose from, epMotion is the perfect companion for your workload.
epMotion automated pipetting is unique
* Flexible - Unlimited applications from cell culture to qPCR in 96, 384-well or single tubes
* Accurate - From 1 µl to 1000 µl - the most accurate automated pipetting solution available
* Easy to use - Ready to go in less than one day – installation and full training in one morning
Feel safe it's Eppendorf
epMotion automated pipetting is the natural step. It's precision is based on the successful Eppendorf pipetting technology. Since introducing piston stroke pipetting technology in 1961 Eppendorf has become the leader in pipetting. Accuracy and quality - epMotion inherited our genes.
Why automated pipetting?
* Reproducibility over millions of pipetted samples
* More precise than manual pipetting
* Frees lab personnel from the bench
* Easier to handle than complex robotic systems
|
|
|
UltraSpense 2000 is the answer to the increasing demand for an automated yet affordable dispenser for 96 and 384 well microplates. High accuracy and precision dispensing into deep well or low profile microplates, coupled with low dead volume and easy programming makes UltraSpense 2000 the ideal solution for virtually all dispensing applications. Dispense a wide range of solvents, acids, bases and other aggressive liquids with confidence through the completely inert liquids path. Optimize performance for a wide viscosity range through the adjustable pump speed. Ultraspense is very fast and accurate; dispense 100 ìl into each well of a 96 well plate within 14 seconds with better than 0.5% C.V. precision.
|
|
|
|
|
|
APS300
Automated Pourer Stacker
The APS300 is a compact automated pourer/stacker designed to provide an efficient hands-free plate preparation. Easy to use, the APS300 ensures a high level of productivity, traceability and security at a moderate cost. All user interfaces and features will help to increase productivity and provide optimal working conditions. For total traceability, the optional ink-jet printer prints directly on the side of the petri plates.
Single carousel with a capacity of 320 plates Ø 55 or Ø 90 mm
Pouring rate up to 750 Petri dishes per hour
Hands-free and automated operation
Easy programming, alphanumerical display and keypad
Store up to 40 user programs
Easy-Load pump for fast tubing loading
Intelligent alarm management
Optional ink jet printer for perfect traceability on the side of the Petri dish
Optional ticket printer
Specific versions for the food, water and clinical laboratories available
The APS300 has been designed to pour and stack automatically up to 320 Petri dishes without any operator intervention once the carousel has been loaded and the programme started. Inverted plates are simply ignored and stacked empty without any operation interruption.
The transfer disc can be easily removed for cleaning
|
|
|
|
|
|
MEDIAJET - reliable walk-away media dispensing system
The MEDIAJET media filling system offers the unique flexibility to fill Petri dishes as well as test tubes of various sizes.
The compact MEDIAJET provides truly reliable, walk-away operation. The dish guidance system is monitored throughout the filling process. Operational downtime due to 'dish jams' resulting from variations of the Petri dishes is completely eliminated. The MEDIAJET vario device version can be converted easily from filling Ø 90 mm dishes to fill Ø 60 mm or Ø 35 mm dishes. Furthermore, the MEDIAJET includes a shaker mode for facilitating pour plate applications. The MEDIAJET is the perfect complementation to the MEDIACLAVE media preparator.
Special features:
- Controlled dish guidance for reliable walk-away operation
- Fast Petri dish processing for filling up to 900 plates per hour.
- Processing of various dish sizes (Ø 90, 60 or 35 mm) and dish heights.
- Biplate option for filling two-compartment Petri dishes.
- Shaker mode for pour plate applications.
- TUBEFILLER option for the filling of up to 1000 test tubes in one hour.
|
|
Do you supply to certified laboratories?
Petriswiss PS 900P with integrated label printer guarantees individual labelling on each dish and meets all traceability requirements.
For direct printing on the dish a professional Inkjet solution is aviable.
|
|
| ... products without technical information |
| |
Pitbull Portable Automatic Beveler
Produce clean machined bevels without operator assistance. The SPB-3000, Pitbull Portable Automatic Beveler, will produce clean machined bevels without operator assistance. The self propelled Pitbull can bevel angles up to 60 degrees and mill all types of metal including stainless steel, aluminum, and composites because of its operational simplicity and very high machining properties. To receive solutions to all of your welding and cutting applications and for complete product brochures and video, please visit our website at www.bugo.com.
|
|
KBM® beveling machines are designed for one man operation. They are mounted on a spring loaded undercarriages incorporating alignment mechanisms which automatically compensate for uneven work surfaces. Gullco KBM® beveling machines self-propel during the beveling operation and continuously bevels plates of any length. The KBM-18 beveling machine can be secured to a bench for stationary operation.
All Gullco portable plate edge bevelers use a rotary shear cutting action to produce clean machined bevels with no thermal distortion. KBM beveling machines are available in four models; KBM-18 & KBM-18U Beveller, KBM-28 & KBM-28U Heavy Duty Beveller. The "U" model is for underside of plate bevelling applications.
FEATURES:
- Self propelled during beveling operation
- Spring loaded adjustable base
- Rotary shear cutting action to produce clean machined bevels.
- Bevels angles 22 1/2 through 55 degrees
- NO THERMAL DISTORTION
- KBM-18 3m per minute
- KBM-28 2m per minute
|
|
|
|
|
|
ABM 26 is the latest portable plate beveler featuring unique AUTO-FEED system.
The machine can travel along plate's edge in both directions and perform bevelling without any physical force of the operator.
Main features and benefits:
- quick fix AUTO FEED system
- advanced overload protection system
- heavy duty control system
- no physical force necessary
- effective and efficient plate beveling with machine-tool quality
- possibility to customize guide track
- user-friendly control panel
- low cost of beveled edge
- safety
Technical specifications:
Power supply: 230-240V / 50-60Hz
Motor power: 1,5 kW
Feed system: AUTO only
Feed speed: up to 500mm; 19 11/16 ” /per min. (for construction steel)
Beveling width: up to 35mm; 1 3/8 ”
Angles range: from 0° up to 75° ( 0°, 15°, 30°, 45° in standard set)
Guide track working length: 2000mm as standard; 78 ¾ ” – unlimited extensions possible by means of additional guide track (1200mm; 47 1/4" each)
Bevelled plate thickness: up to 60mm; 2 3/8 ” – when more than 35mm; 1 3/8 ” specify with order.
|
|
HSS Handheld System
for automatic feeding and insertion of panel clips
- For pushnuts, panel clips, plugs, caps, etc.
- Fast and simple processing
- Controlled assembly
- Uniform processing quality
|
|
- For screws and headless pin
- Double slide system for head stroke and bit stroke
- Shut-off by depth or torque
- Screwing upside down also possible
- Simple and robust design
|
|
| ... products without technical information |
| |
Distributor of labels width 140mm.
Label : format min. : 10mm x 15mm; max. format : 140mm x 200mm.
Speed: 5m/mn.
The advance of the label is regulated by switch.
Side adjustment of the cell.
This model also exists in width 200mm.
|
|
| ... products without technical information |
| |
|
|
|
|
ETM320 Mag Stripe Ticket Dispenser
ETR320 Exit Ticket Reader
The MAPS 900 ETM320 magnetic stripe ticket dispensing entry terminal is an integral component of the MAPS900 machine-readable parking system. Manufactured with the latest technological advancements, the ticket dispenser is located at the entrance point of the parking facility, dispensing an encoded magnetic stripe ticket to incoming parkers. Tickets are encoded and dispensed via the “pushbutton” and are used when exiting at Central Cashier or Exit Cashier Stations for payment of fee. The removal of the entrance ticket will automatically raise the parking gate allowing access to the parking facility. A clear LCD display and an optional intercom substation promotes user friendliness. The “credit card” sized ticket is in both machine and person readable formats.
The MAPS 900 ETR320 magnetic stripe ticket reader exit terminal is located in the parking facilities exit lane. The ETR320 exit terminal accepts paid tickets, automatically raises the barrier and captures paid tickets allowing exit. An LCD display clearly displays instructions such as: “Insert Ticket”, “Exit The Parkade”. If the parker has overstayed the grace period (programmable time between paying and exiting), the display will instruct the parker to “Return To Pay Additional Fee”. Manufactured from 10 gauge steel the ETR320 is an integral component of an automated Central Cashier or Pay At Exit system.
|
|
| ... products without technical information |
| |
The SUPPLY POINT tool vendor is made out of an automatic cupboard and of a tool Management software.
After having identified the operator and his rights, the cupboard automatically distributes the EXACT QUANTITY of required tools.
The software saves all carried out operations.
This automatic tool vendor is very simple to use and offers following benefits :
- Tools are available 24 hours a day and 7 days a week
- Tools inputs and outputs can be traced
- Stock control
- Reduced inventories
- Control of supplies...
According to the cases, this tool vendor can help save up to 30 % of tool consumption.
|
|
| ... products without technical information |
| |
CribMaster ToolCube
Open the drawer and you access to only the tools you have selected using our configurable drawer divider system. High Security in a drawer system helps you by:
Dispensing costly expendables like carbide cutting tools without dropping or repackaging
Allowing flexible drawer configurations with 9 unique drawer sizes
Allowing issue and returns to the same device
Ensuring all re-ground or reworked tooling is issued prior to new
Tracking with multi-category usage & accounting %u2013 Up to seven (6 user definable) classifications for tracking and reporting
Allowing flexible automatic reordering & resupply to limit stock outs
Item issue efficiency %u2013 improved productivity by issuing nearer to job sites
Helping manufacturing efficiency %u2013 machine usage improved by minimizing downtimes
Eliminating stock-outs with features like critical alerts and automated optimum order levels
|
|
CNC-Grinding Centre S22E-turbo and S22E-NUM
Economic high-efficiency CNC grinding
- 5-axis grinding centre
- Patented vertical design
- 8-station wheel changer as standard feature
- Heavy-duty 10 kW drive power
- Rapid traverse rates of 12 m/min in the linear axes
- Direct drive of the A-axis with up to 500 rpm
- Ultra-modern PC control
- PickUp loader with disk-type magazines or chain loader with 155 variable tool locations
|
|
|
This system enables to feed in a fully automatic way strip brazing material between two metallic pieces to be assembled. Method widely used in the joining of copper parts. Self-running device : supplied as a kit, with its own PLC, it can be mounted on every existing spot welding machine. More than a feeder of brazing strip, this system also gives you additional quality controls : control of the brazing presence before welding and control of the melting of the strip.
|
|
EFD presents the new ProcessMate 6100 Hot Air Reflow System. This digital bench top reflow system uses an active feedback loop to accurately control air temperature to ± 5ºC. Temperature ranges from 100ºC to 480ºC adjustable in 1ºC increments. The diaphragm pump provides an adjustable, repeatable, constant air flow.
When used with EFD SolderPlus® dispensing solder paste, the ProcessMate 6100 reduces operator variability, rework and scrap while increasing productivity and production yields without special training requirements typical of wire-and-iron soldering. The precise temperature and air flow control allows for a larger process window for reflow without overheating components. Operators are able to visually observe solder being reflowed to prevent common soldering defects.
|
|
Satellite Paste Applicators are designed to complement an existing heat source, such as furnace or induction. These freestanding units apply single, multiple, or "ring shape" paste deposits onto assemblies. Cycling is automatic and error-free with an operator removing the pasted part and loading it into the adjoining heat source.
Applicator guns can also be mounted to a robot to apply a detailed combination of paste dots and stripes to a particular part. After the pasting cycle, the part is joined to its companion members and fixtured to the subsequent heating and cooling sequence.
Dual station system utilizes rotating mandrel technique to apply 360° stripe of Fusion Paste onto part joint area.
|
|
SPECIAL
This product line gathers all automated or semi-automated systems, designed and built for complete or partial applications, on specific request for custom equipment, syandalone or integrated.
|
|
| ... products without technical information |
| |
The MicroCoat is a different type of stock lubrication system that lets metal stampers apply the perfect amount of oil for each job.
Contact lubrication systems like pads and rollers can be difficult to regulate, are easily contaminated, and often require significant maintenance.
In contrast, the MicroCoat is a non-contact system that applies oil as a fine, consistent film that provides complete coverage using much less oil.
|
|
|
|
