|
|
|
|
|
|
Precision Dispensing Pump for UV Sensitive Fluids
Fluid Metering, Inc. of Syosset, NY
announces their new VMP Electronic
Variable Displacement Metering Pump
for accurate dispensing of UV (Ultra-
Violet) sensitive fluids.
Typical fluids that fall into this category are,
UV curable adhesives, UV coatings, and
photo lithography chemicals.
The VMP Variable Displacement
Dispenser is a fully programmable
dispensing system, which utilizes FMI’s
patented CeramPump® Valveless piston
pump design. A precision stepper motor
controls the pump speed.
However, what makes the VMP truly
unique from other FMI dispensers is the
addition of a second stepper motor, which
electronically adjusts the piston
displacement. This provides ultra-fine
dispense adjustments through varying of
piston stroke length.
The VMP can be programmed for a variety of functions using a user-friendly Touch Screen Interface (TSI) which can control up to 16 pumps on a single bus. Up to 128 metering devices
can be controlled using a PLC or computer.
The VMP will store up to 100 programs letting you change between setups on the fly. For UV applications, the pump head is made from either 316 stainless steel or opaque PVDF to isolate UV light from the process fluid as it travels through the pump head.
Typical applications include dispensing of UV curable adhesives for medical component assembly, photo resist for printed circuit and semiconductor manufacturing, and UV adhesives & coatings for DVD manufacturing.
|
|
Features:
- Provides a low-cost means of dispensing fluids accurately, to better than 1%.
- Ideal for repetitive and volumetric dispensing of acids, solvents, and aqueous solutions.
- FMI's unique low-dead-volume, valveless pump heads.
- High accuracy, synchronous motor drives.
|
|
|
|
|
|
APS300
Automated Pourer Stacker
The APS300 is a compact automated pourer/stacker designed to provide an efficient hands-free plate preparation. Easy to use, the APS300 ensures a high level of productivity, traceability and security at a moderate cost. All user interfaces and features will help to increase productivity and provide optimal working conditions. For total traceability, the optional ink-jet printer prints directly on the side of the petri plates.
Single carousel with a capacity of 320 plates Ø 55 or Ø 90 mm
Pouring rate up to 750 Petri dishes per hour
Hands-free and automated operation
Easy programming, alphanumerical display and keypad
Store up to 40 user programs
Easy-Load pump for fast tubing loading
Intelligent alarm management
Optional ink jet printer for perfect traceability on the side of the Petri dish
Optional ticket printer
Specific versions for the food, water and clinical laboratories available
The APS300 has been designed to pour and stack automatically up to 320 Petri dishes without any operator intervention once the carousel has been loaded and the programme started. Inverted plates are simply ignored and stacked empty without any operation interruption.
The transfer disc can be easily removed for cleaning
|
|
|
|
|
|
MEDIAJET - reliable walk-away media dispensing system
The MEDIAJET media filling system offers the unique flexibility to fill Petri dishes as well as test tubes of various sizes.
The compact MEDIAJET provides truly reliable, walk-away operation. The dish guidance system is monitored throughout the filling process. Operational downtime due to 'dish jams' resulting from variations of the Petri dishes is completely eliminated. The MEDIAJET vario device version can be converted easily from filling Ø 90 mm dishes to fill Ø 60 mm or Ø 35 mm dishes. Furthermore, the MEDIAJET includes a shaker mode for facilitating pour plate applications. The MEDIAJET is the perfect complementation to the MEDIACLAVE media preparator.
Special features:
- Controlled dish guidance for reliable walk-away operation
- Fast Petri dish processing for filling up to 900 plates per hour.
- Processing of various dish sizes (Ø 90, 60 or 35 mm) and dish heights.
- Biplate option for filling two-compartment Petri dishes.
- Shaker mode for pour plate applications.
- TUBEFILLER option for the filling of up to 1000 test tubes in one hour.
|
|
|
|
|
|
All you need is here
epMotion automated pipetting systems will make you see things in a new light. Whether it's sample or reagent transfer, assay set-up or nucleic acid extraction, all your routine pipetting tasks will be automated with more precision and safety than you ever experienced before with manual pipetting. With four models, two instrument sizes and multiple pipetting deck combinations to choose from, epMotion is the perfect companion for your workload.
epMotion automated pipetting is unique
* Flexible - Unlimited applications from cell culture to qPCR in 96, 384-well or single tubes
* Accurate - From 1 µl to 1000 µl - the most accurate automated pipetting solution available
* Easy to use - Ready to go in less than one day – installation and full training in one morning
Feel safe it's Eppendorf
epMotion automated pipetting is the natural step. It's precision is based on the successful Eppendorf pipetting technology. Since introducing piston stroke pipetting technology in 1961 Eppendorf has become the leader in pipetting. Accuracy and quality - epMotion inherited our genes.
Why automated pipetting?
* Reproducibility over millions of pipetted samples
* More precise than manual pipetting
* Frees lab personnel from the bench
* Easier to handle than complex robotic systems
|
|
|
UltraSpense 2000 is the answer to the increasing demand for an automated yet affordable dispenser for 96 and 384 well microplates. High accuracy and precision dispensing into deep well or low profile microplates, coupled with low dead volume and easy programming makes UltraSpense 2000 the ideal solution for virtually all dispensing applications. Dispense a wide range of solvents, acids, bases and other aggressive liquids with confidence through the completely inert liquids path. Optimize performance for a wide viscosity range through the adjustable pump speed. Ultraspense is very fast and accurate; dispense 100 ìl into each well of a 96 well plate within 14 seconds with better than 0.5% C.V. precision.
|
|
This automated filling system represents a cost-effective solution by replacing manual operations with state-of-the-art laboratory equipment for rapid and accurate filling.
Consisting of a high precision dispenser (PM05) and a highly repeatable robotic module (XY500), it ensures the automated filling of tubes, bottles, impedance cells, etc. for greatly enhanced laboratory productivity.
Print-out of all dispensing parameters complies with GLP and EN 45001 (option).
The system dispenses any type of liquid into two 252 tube racks in a complete cycle. The unique quick-load system developed by AES Laboratoire reduces loading time by eliminating unnecessary handling of tubes.
|
|
Do you supply to certified laboratories?
Petriswiss PS 900P with integrated label printer guarantees individual labelling on each dish and meets all traceability requirements.
For direct printing on the dish a professional Inkjet solution is aviable.
|
|
|
|
|
|
EVERYTHING about dispensing that has been valued in terms of precision and consistency. Autotronik High Precision Dispenser System was designed to concentrate on the essentials, which is cost effective and simple to maintain.
Super fast valves and clever control firmware ensure perfectly controlled dispensing processes. With this elaborate technology and little need for cleaning of the dispensing head, the unit can be used much more effectively. This does not only apply to conventional dot sizes, but also for any sort of microdot, down to a diameter of 0.15 mm.
At the center of the demand for high precision stands the Advanced-Time-Pressure (ATP) method. This is supported by reliable electronics, five super fast valves and highly accurate temperature measurement. All support the automatic calculation and control of precisely appropriate pressure pulses to ensure absolutely constant dispense volumes.
Adhesives, too, can be used without problems. The patented dispense head heating prevents 'stringing'. When dispensing thin potting compounds, for example, the ATP method of the Autotronik High Precision Dispenser System proves its worth. Cartridge fill levels are automatically determined by the pressure built up response and the required snuff back vacuum applied.
|
|
|
|
|
|
NEMO® Dispensers guarantee the highest level of precision in dosing and reproducibility. For this reason, NEMO® Dispensers and NEMO® Hand Dispensers are employed in a great variety of applications and industries.
Such as:
- in vehicle manufacturing
- in the electronics industry
- in renewable energy resources
- in the pharmaceutical and foods industries
- in other adhesive and sealing industries
Features of NEMO® Dispensers and Hand Dispensers
- very gentle conveyance
- compact dimensions at a high number of stages
- large cross sections of inlet
- conveyance also of compacted products
- conveyance of solids
NEMO® Dispensers and Hand Dispensers offer you:
- conveyance volume in proportion to rotation speed
- high dosing precision
- drip-free dosing
- constant low-pulsation conveyance
- high efficiency
- low life cycle costs combined with easy serviceability
Everything from a single supplier
Our broad product portfolio makes it possible for us to design complete dosing systems for you. Take advantage of our many years of experience and know-how.
|
|
The microdispensers DMP range has been specially designed for a very highly accurate microdosing of all kind of powdery products. They are often used for accurate filling operations with powders.
Its operating principle makes possible a high rate dosing.
Dosing from 0.05 to 150 grams
Accuracy: ±1%
Rate: up to 1 dose per second
|
|
A shaft encoder records every hundredth of a turn, and a preselection counter is used to set the number of turns corresponding with the volume - and hence weight - you need.
Once this machine reaches the number of turns needed, the screw stops, and the filling system is ready for a new container.
|
|
| ... products without technical information |
| |
System comprises an isolation transformer and a common mode choke DETAILS
Meets all current requirements of Gigabit Ethernet PoE Plus
Isolation Transformer OCL ³ 350 µH with a 35 mA dc offset up to 70°C.
Can handle current up to 800 mA
Can be used with virtually all chipsets
RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations
|
|
| ... products without technical information |
| |
 see the results for the following category : UPSs |
|
|
