|
|
Bench Top & Cupboard Styles
Evaporation from drips and open containers contributes considerably to poor quality air within the laboratory. The Bigneat range of storage cabinets removes vapours, purifies the laboratory air and enhances the long-term health of laboratory personnel.
Main Features:
. Continually cleans up and purifies laboratory air.
. May be used when ducted extraction is unavailable.
. No outside exhaust necessary for vapours.
. Fully mobile, a simple electrical connection is all that is needed.
. Energy saving, cost effective & safe.
|
|
THE AIR OF THE LABORATORY IS PURIFIED
The air released by the filter contains 100 times less pollutants than the acceptable values defined by official authorities.
STANDARD EQUIPMENT :
•Electronic "fan failure" alarm for the continuous monitoring system of the ventilation.
•Sampling port for testing the saturation level of the filter.
VERY SILENT TURBINE FAN
Only 49 dBA
GOOD VISION OF THE STORAGE
Thanks to lockable transparent UV resistant door.
EASY TO SET-UP CLOSE TO THE USERS WORKSTATION
Does not require any ducting.
SPILL TRAY FILLED WITH AN ABSORBING MAT
To contain potential spill from broken containers.
|
|
|
|
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
|
|
|
|
Portable Safety Station for Personnel Protection
The LabGard® NU-813 is a Class I Biological Safety Cabinet that is an exceptional value and offers personnel protection for work in process where other cabinets are not appropriate choices. The NU-813 is a generation of exceptionally quiet enclosures that can be used with a micro-computer based balance. The open front allows room air to enter the hood, flowing past the operator into the work access opening, providing an air barrier which minimizes contaminants generated within the hood work zone from migrating into the room. The small cabinet size means it can be strategically placed for convenient handling of aerosols and particulates of low to moderate risk assessment.
The NU-813 automatically exhausts filtered air back into the room, or can be coupled from the exhaust collar to the building exhaust system, making the cabinet suitable for work with compounding powders. When used as a Containment Cabinet provides personnel protection for handling aerosols and particulate matter of low risk assessment. This configuration employs a 99.99% efficient HEPA filter. The NU-813 can also be used as a Ductless Fume Hood providing personnel protection from solvents such as those employed in cytology. This configuration uses either a Purafil® filter or a Charcoal filter.
The NU-813 is ideal for applications such as Life Science, Hospital and/or Pharmacy for the safe handling of powders or liquids, Animal facility for necropsy or other processes that require personnel protection.
|
|
|
|
|
|
Biological Safety Cabinet
The new CellGard NU-480 Laminar Flow Class II, Biological Safety Cabinet features the unique TouchLink Electronic Airflow Control System, a microprocessor module that establishes and maintains an optimum balance between the supply air system and exhaust air system through constant monitoring of airflow, using a digital dual thermistor airflow sensor and a digital differential velocity pressure flow grid. The information is received by the Electronic Control System to control both down flow and exhaust flow. The system maintains a complete diagnostic function and has remote contacts for remote sensing of various functions.
CellGard’s Decontamination Process - Decon 101, is a unique method to inactivate or destroy infection agents or neutralize toxic agents. This system uses formalin or liquid formaldehyde as the disinfectant agent and liquid ammonia as the neutralizing agent. The system is comprised of the Vaporizer, the Exhaust Canopy, with Vapor Collection Cartage and four [4] window clamps to insure a gas tight window seal. Activation of the system can be automatic using TouchLinkTM or done manually. The front hinged panel opens 30° for ease of manual cleaning.
The NU-480 is also available with Glass Side Walls which allows better viewing for Teaching and Educational Labs. Numerous ergonomically designed features for user comfort and adjustability: The new design gives you more leg room, service valves have been staggered on the sidewalls making them easily accessible and the base stand or base storage cabinet can accommodate an adjustable hydraulic lift to raise or lower the work surface to a full eight inches
|
|
| ... products without technical information |
| |
The Rousseau mobile cabinet is one of the safest on the market
It is very easy to modify the configuration of the cabinet; drawer order can be changed at any time
Polyurethane casters with high quality rolling systems make moving the cabinet easy and do not leave marks
For a personalized configuration, contact a customer service representative
|
|
|
|
|
|
Mobile storage
bott’s range of mobile storage products gives customers the flexibility to safely move tools, equipment, components and work surfaces to wherever they’re needed.
All feature four heavy duty castors (two fixed; two 360° swivel with foot brakes) – and mobile storage units with drawers feature a safety trigger mechanism that means drawers cannot open accidentally. Drawer blocking as standard means that only one drawer can be opened at a time, optimising stability in use.
Heavy duty castors with two foot brakes
Side or front mounted handle for safe, controlled movement
Safety trigger mechanism prevents drawers opening accidentally
Ergonomic reach-through handle makes low drawers easier to open without stretching
Blocking mechanism as standard – only one drawer can be pulled out at a time
Labelling strips with easy-open transparent cover. Template for consistent labelling downloadable from www.bott-group.com
High strength drawer pan accepts a wide range of dividers, adjustable on a 25mm pitch grid
Wide range of drawer dividing accessories available
100kg UDL 93% extension drawer guides as standard for high load bearing capacity
High quality locking system, optional master key system
Electronic remote locking system option
|
|
Wherever you need to work, Stanley® Vidmar® mobile storage cabinets are in on the action! Heavy-duty mobile casters make our mobile cabinets easy to move, allowing you to position them exactly where you need them.
Stanley Vidmar offers preconfigured mobile storage cabinets, or you can custom-build your mobile cabinet in any size and configuration you choose! All Stanley® Vidmar® mobile storage cabinets require lock-in/lock-out latches or single-drawer release.
All mobile cabinets are backed by Stanley Vidmar's lifetime warranty. For more detailed information on mobile cabinet options, visit our Interactive Product Catalog or contact a Storage Sales Engineer.
|
|
Mobile Storage Cabinets
5-Drawer 79-Compartment Shallow Depth Mobile Storage Cabinet
5-Drawer 127-Compartment Extra-Wide Shallow-Depth Mobile Storage Cabinet
4-Drawer 100-Compartment Standard Mobile Storage Cabinet
8-Drawer 142-Compartment Shallow-Depth Mobile Storage Cabinet
8-Drawer 220-Compartment Extra-Wide Shallow Depth Mobile Storage Cabinet
|
|
CONTAINERS OPTIMISED FOR STORING SMALL TANKS
maximum storage capacity: 12 small 1,000 litre tanks
Collection tray with a capacity of 1/3 rd the total storable volume
Swing or sliding doors in 50 mm thick mineral wool sandwich panels between galvanised, over paintend metal sheet.
OPTIONALS
Insulating top in 50 mm thick mineral wool sandwich panels between galvanised over painted metal sheet
For flammable liquids an optional ventilation grille equal to 1/30th of the plan surface
|
|
Metal vat of retention for the installation of 2,4 barrels of 220 liters or 1 cubitainers of 1000 liters, volume of retention 240,440 or 1050 liters out of standard; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet; Lid assembled on 2 jacks with gas or carries beating with lock and keys. Special achievements on mesure.FABRICATION FRENCH
OPTION: hot galvanization, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec tainer" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) and that in order to preserve our environment. Its lid protects it from the bad weather, it can be thus stored in outside. Its lock 2 points prevents the access to the barrels once closed.
|
|
|
SCHNEIDER containers are reusable packaging that are designed to meet the most varied of needs and uses. The front has double-wing doors. Door opening angle 270°, end face with slot-in profiles, slot-in dimensions 50 mm to insert trays, 4-way design with all-round skids for forklifts and hand-lift trucks, stackable, etc...
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
