|
|
Bench Top & Cupboard Styles
Evaporation from drips and open containers contributes considerably to poor quality air within the laboratory. The Bigneat range of storage cabinets removes vapours, purifies the laboratory air and enhances the long-term health of laboratory personnel.
Main Features:
. Continually cleans up and purifies laboratory air.
. May be used when ducted extraction is unavailable.
. No outside exhaust necessary for vapours.
. Fully mobile, a simple electrical connection is all that is needed.
. Energy saving, cost effective & safe.
|
|
THE AIR OF THE LABORATORY IS PURIFIED
The air released by the filter contains 100 times less pollutants than the acceptable values defined by official authorities.
STANDARD EQUIPMENT :
•Electronic "fan failure" alarm for the continuous monitoring system of the ventilation.
•Sampling port for testing the saturation level of the filter.
VERY SILENT TURBINE FAN
Only 49 dBA
GOOD VISION OF THE STORAGE
Thanks to lockable transparent UV resistant door.
EASY TO SET-UP CLOSE TO THE USERS WORKSTATION
Does not require any ducting.
SPILL TRAY FILLED WITH AN ABSORBING MAT
To contain potential spill from broken containers.
|
|
|
|
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
|
|
|
|
Biological Safety Cabinet
The new CellGard NU-480 Laminar Flow Class II, Biological Safety Cabinet features the unique TouchLink Electronic Airflow Control System, a microprocessor module that establishes and maintains an optimum balance between the supply air system and exhaust air system through constant monitoring of airflow, using a digital dual thermistor airflow sensor and a digital differential velocity pressure flow grid. The information is received by the Electronic Control System to control both down flow and exhaust flow. The system maintains a complete diagnostic function and has remote contacts for remote sensing of various functions.
CellGard’s Decontamination Process - Decon 101, is a unique method to inactivate or destroy infection agents or neutralize toxic agents. This system uses formalin or liquid formaldehyde as the disinfectant agent and liquid ammonia as the neutralizing agent. The system is comprised of the Vaporizer, the Exhaust Canopy, with Vapor Collection Cartage and four [4] window clamps to insure a gas tight window seal. Activation of the system can be automatic using TouchLinkTM or done manually. The front hinged panel opens 30° for ease of manual cleaning.
The NU-480 is also available with Glass Side Walls which allows better viewing for Teaching and Educational Labs. Numerous ergonomically designed features for user comfort and adjustability: The new design gives you more leg room, service valves have been staggered on the sidewalls making them easily accessible and the base stand or base storage cabinet can accommodate an adjustable hydraulic lift to raise or lower the work surface to a full eight inches
|
|
|
|
|
|
Portable Safety Station for Personnel Protection
The LabGard® NU-813 is a Class I Biological Safety Cabinet that is an exceptional value and offers personnel protection for work in process where other cabinets are not appropriate choices. The NU-813 is a generation of exceptionally quiet enclosures that can be used with a micro-computer based balance. The open front allows room air to enter the hood, flowing past the operator into the work access opening, providing an air barrier which minimizes contaminants generated within the hood work zone from migrating into the room. The small cabinet size means it can be strategically placed for convenient handling of aerosols and particulates of low to moderate risk assessment.
The NU-813 automatically exhausts filtered air back into the room, or can be coupled from the exhaust collar to the building exhaust system, making the cabinet suitable for work with compounding powders. When used as a Containment Cabinet provides personnel protection for handling aerosols and particulate matter of low risk assessment. This configuration employs a 99.99% efficient HEPA filter. The NU-813 can also be used as a Ductless Fume Hood providing personnel protection from solvents such as those employed in cytology. This configuration uses either a Purafil® filter or a Charcoal filter.
The NU-813 is ideal for applications such as Life Science, Hospital and/or Pharmacy for the safe handling of powders or liquids, Animal facility for necropsy or other processes that require personnel protection.
|
|
|
|
|
|
AirClean Systems PowderSafe Balance Enclosure
AirClean® Systems PowderSafe™ Type C enclosures incorporate the airflow characteristics and HEPASafe™ filtration technology of the Type B enclosures while offering the chemical adsorption capability of our ductless fume hoods. The Type C enclosures provide effective operator protection from potential exposure to toxic powders, particulate, chemical fumes, and vapors. The AirSafe™ automatic safety controller constantly monitors airflow and filter conditions.
* HEPA/Carbon Ductless Polypropylene Balance Enclosure
* AirSafe™ automatic safety controller
* Horizontal laminar airflow pattern
* Chemically impervious construction
* Seamless design
* High mass - solid polypropylene construction
* HEPASafe™ filter change out
* Bonded carbon filtration
* Vapor-proof fluorescent lighting
* Optional dark blue base
* Optional disposal port for weighing containers
* No installation required
* Available in 36”, 48” and 72” widths
* 110V and 220V AC enclosure available
* Standard with fluorescent light and electrical cord access port (ACASLIP) slip hatch on each side
|
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions
|
|
|
|
|
|
Modular extraction hood: banish welding fumes to the past
Euromate, a specialist in innovative solutions for the extraction of welding fumes, has developed a modular extraction hood. This modular concept provides the best answer to all your welding fumes, cutting and gouging issues, where source extraction is impossible.
Often the extraction of welding fumes in hoods takes place in the middle, not always being very efficient. Some of the fumes will flow out at the sides of the hood – not being extracted at all. Therefore Euromate developed a side extraction framework, optimising the airflow considerably and thus improving the extraction’s efficiency.
As extraction takes place from the sides instead of the middle, more fumes are being extracted from the working area – creating a healthier working environment. Thanks to the well thought-out deflector plate, the airflow is controllable and minimizes sparks to reach the air-treatment system, decreasing the risk of fire substantially.
As the extraction hood of Euromate comes in modular parts, the extraction hood can easily be put together on the spot. It’s not a do-it-yourself kit, but it is not far of! The extraction hood can be suspended from the ceiling or used as a freestanding unit on aluminium legs – according to the environment you are working in. The legs are optional, available in 2, 2.5 and 3 meters and can be cut to requested lengths. The modular design comes as standard with eye bolts. Euromate offers a modular design from 1.5 m² up to 8 m². Expandable with various accessories, such as a lighting fixture incl. fluorescent light, aluminium legs and welding strips.
|
|
|
|
|
|
AirClean Systems Polypropylene Ductless Fume Hoods
AirClean®Systems portable ductless fume hoods remove toxins by filtration while protecting operators and the environment. Solid polypropylene construction with no pre-filtration metal components allows excellent corrosive chemical resistance. Coupled with AirZone™ baffling for proper airflow control, AirClean®Systems ductless fume hoods usher in a new era of quality filtration hood design.
Features:
* AirSafe™ automatic safety controller
* Vertical sliding safety glass sash
* Dual wall construction allows for front mounting of services such as water, gas, or electrical outlets.
FlowSmooth™ airfoil on sash lip promotes laminar airflow
* Polypropylene construction for excellent chemical resistant properties. The result - “NO MORE RUST” which allows for longer service compared to standard metal enclosures
* Wide range of activated bonded carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particle
* Integral vapor-proof fluorescent lighting system
* Available in 110V or 220V AC versions
* No duct required for operation
* Shipped fully assembled
* Meet and exceed relevant OSHA and ANSI Z9.5 standards
|
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed.
|
|
AirClean Systems Vertical Laminar Flow Workstations
Optimal with applications that require a clean work area but do not involve hazardous materials. The AirClean Systems AC600 Series vertical laminar flow workstations are compact and light weight allowing for multiple “clean zones” within a laboratory.
Features:
* UVTect™ microprocessor controller
* Class 100 (ISO 5) vertical laminar flow
* 360-degree visibility
* Integral polypropylene base for easy cleaning
* All thermoplastic construction
* Built-in fluorescent light
* HEPA filter monitor automatically indicates when filter change is required
* Available in 24”, 32” and 48” widths
* Available in 110 V or 220 V versions
* Includes HEPA filter, intial prefilter and one ACASLIP slip hatch (in right rear)
Model Options:
AC632LF: 32" Wide
AC632TLF: 32" Wide, Tall Version
AC648LF: 48" Wide
AC648TLF: 48" Wide, Tall Version
|
|
|
|
|
|
AirClean Systems AC600 Series Mobile Ductless Fume Hoods
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
Optional Features:
Custom cart available in fixed 34" height; storage shelf may be added
Built-in polypropylene cup sink and drain
Access panel for electrical cords
Water and gas fittings
Polypropylene base cabinet
chemical disposal pump
|
|
|
|
|
|
TeachAide™ Demonstration Fume Hood from AirClean Systems
A low-cost solution for protection of students, teachers, and the environment during chemistry experiments. The TeachAide™ Demonstration Fume Hood provides exceptional protection from experiments using or generating toxic fumes, vapors, particulate, or smoke.
UL, CSA, CE CERTIFIED!
AirClean® Systems TeachAide™ ductless classroom demonstration workstation is shipped fully assembled.
== Standard Safety Features ==
-AirSafe™ automatic safety controller displays and constantly adjusts blower speed to maintain set face velocity. In combination with airflow monitoring and gas detection, the AirSafe™ automatic safety controller allows you to breathe easier knowing your safety is constantly being monitored.
-Filtration and electronics are located above the work area minimizing the chance of chemical spills entering these sensitive areas.
-The sparkless/brushless motor is post-filter
-The deep base effectively contains accidental spills
-Low airflow alarm warns user both visually and audibly
-Meets relevant OSHA / ANSI regulations and guidelines for fume hood airflow
|
|
|
The ANSI/ASHRAE 110 test is a method of testing the performance of laboratory fume hoods. Kanomax Dif-Kit tracer gas hardware is ideal for use in performing the Tracer Gas test in accordance with ANSI/AHSRAE Standard 110-1995.
|
|
MX-2000 Glovebox Atmospheric Chambers
Features:
- Wide choice of control capabilities
- Range of vacuum pumps
- Sturdy, rugged, modular design
- Optional programmable logic
- Optional single or dual-column gas purification units
|
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms
|
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service.
|
|
|
The F73A and F73B fume extraction systems provide industrial electronic control of welding and metalworking fumes in work areas. The F73A and F73B clean the air of industrial smoke and oil mists. Either source capture techniques or ambient air cleaning can be used to provide healthier working conditions.
|
|
The intelligent extraction hood!
REVEN® temperature and fume sensors enable perfect control of the exhaust air flow of extraction hoods. In normal large-scale kitchens, one, two or a maximum of three speeds are available to adjust the extraction system to the heat and fume concentration in the kitchen. An automatic control with sensors provides for far more efficient ventilation.
|
|
This range uses the very latest Chemcap™ filtration system that make these cabinets not only one of the SAFEST on the market, but also the most cost effective to purchase and to maintain.
Typical uses are in the laboratory are for removal of chemical fumes, vapours and when used in combination with a HEPA filter particulates as well.
Bigneat Recirculatory Filtration Fume Cabinets coupled with Chemcap™ filtration meet the world’s most stringent standards: The AFNOR NF X 15-211 and BS 7989:2001
No ducting or expensive installation costs
Model shown 4002 - 410mm wide
|
|
Inert Atmosphere Heating
Atmospheric Glove Boxes
• Integrated systems for auto and manual operation
• For use with nickel, titanium, superalloys,
stainless steel and refractories
• Replacement for hydrogen belt furnaces
• Reduces a typical 25-minute, quartz lamp
heating cycle to just three minutes
• Ergonomics increase operator comfort & safety
|
|
FEATURES
. Quiet operation, less than 50d(B)A and low power consumption.
. Portability of ductless fume cabinets enables their positioning in the optimum location, best for working and less walking around the laboratory thereby also substantially reducing risk from spillages etc.
. Filtration cabinets are safer for the environment, no pollution to the atmosphere, filters are removed and bagged for documented and accredited disposal.
. No ducting is required, therefore installation costs are kept to a minimum.
|
|
|
|
|
|
BIGNEAT manufactures enclosures for containment of robotics systems, for OPERATOR protection (LAOP) or PRODUCT protection (LAPP).
For bio-hazard and bio-protection we offer several cabinet types. LABS cabinets offer both OPERATOR and PRODUCT protection at levels of sterility and protection for most drug discovery applications. For more sensitive, or more hazardous applications Bigneat manufactures cabinets to Class II design, providing protection to the essential requirements of BS EN12469:2000.
The need for these types of enclosure is increasing because of the demand in the Pharmaceutical industry for rapid throughput and reliability of biologically sensitive processes and associated bio-hazards - Bigneat is Europe's Number 1 supplier of Robotics and Laboratory Automation enclosures.
Typical applications include for cell culture, cell screening, drug discovery, gene assays, high-throughput screening, rapid microbiological detection systems.
Special features of Biological Cabinets:
. Ducted or recirculatory filtration models available
. Excellent access for maintenance and servicing
. Emergency stop control
. Lighting and UV lamps included
Options:
. Electrical sockets
. Used tips chute
. Leaded acrylic for radiochemistry applications
|
|
BIGNEAT Laminar flow cabinets are designed to protect product or operating staff by maintaining a particle-free ultra clean zone. They can be used whenever a Class II cabinet is deemed unnecessary.
Laminar Flow Cabinets are available in two versions, providing horizontal air for operator or product protection.
All BIGNEAT Laminar Flow Cabinets are provided with a well lit diffused hidden lighting as standard and efficient sound insulation, which ensures the operator can use the cabinet for long periods without discomfort.
Performance
Bigneat cabinets complies to ISO 14644 - 1:1999 Class 5
Air is delivered to the worksurface at better than Class 100 quality
Highlighted Features:
. Comfortable to use, easy controls with well lit working area
. Excellent working access
. Easy clean surfaces
. Fluorescent tubes are concealed within the fan housing
. Working sound levels less than 55dB(A)
. LED airflow indicators and audible alarms for incorrect airflow condition
|
|
|
Horizontal Laminar Flow Standard: Work Plan INOX transparent side walls Electrical filter clogging alarm
|
|
|
|
|
|
NuAire’s Polypropylene NU-156 FumeGard vertical laminar airflow fume hoods and NU-164 By-Pass fume hoods provide quality personnel protection and are an excellent choice for long lasting, highly corrosive resistant, metal free applications. NuAire fume hoods when used with proper laboratory techniques are an effective laboratory aid in reducing the potential exposure of gases, fumes, vapors and/or particulates generated as a result of work-in-progress operations. The ideal solution for professionals in chemical engineering, electrical engineering, environmental toxic analysis, toxicology, analytical chemistry, and trace metal analysis fields. Each cabinet is inspected and certified to SEFA 1-1992 performance and are independently tested to meet the requirements of ASHRAE Standard 110-1995.
NuAire’s Polypropylene Hoods and Casework products are manufactured using stress-relieved, fully seam-welded, white 100% Polypropylene. The outer cabinet shell, kick plate, and shelves are constructed from ½ inch polypropylene, walls and floors are reinforced maintaining structural integrity. The drawers, drawer guides, sliding window components, handles, hinges and screws are solid polypropylene. NuAire’s products are designed to conform to the specific needs of your laboratory applications and requirements.
|
|
Mobile Fume Cabinet Model 1004
CHEMCAP cabinets are of a ductless design, they have carbon filters for efficient removal of chemical fumes, vapours and when also coupled with HEPA filters remove particulates as well.
They efficiently remove contaminants from the air drawn through the filter system and return the cleaned air back to the laboratory.
1. Can be installed on existing bench or be supplied with a trolley.
2. Quiet Operation
3. Low Air flow alarms and hour counter
4. 410mm, 600mm, 800mm, 1000mm, 1200mm, 1500mm widths are available
5. No ducting or expensive installation costs
Bigneat Recirculatory Filtration Fume Cabinets coupled with Chemcap filtration meet the world's most stringent standards: The AFNOR NF X 15-211 and BS 7989:2001
|
|
BIGNEAT manufactures ducted or recirculatory cabinets for safe powder handling and weighing. These provide:
1. Excellent operator protection
2. Minimum maintenance
3. Stable 1 x 10-6g measurement
4. Excellent accessibility
The Range comprises XIT, XIT PLUS, EXCEL Safechange and EXCEL Plus cabinets and additionally we offer a bespoke fabrication service for your specialist applications.
Shown here XIT F3-XIT-S.
|
|
|
|