|
|
AirClean Systems PowderSafe Balance Enclosure
AirClean® Systems PowderSafe™ Type C enclosures incorporate the airflow characteristics and HEPASafe™ filtration technology of the Type B enclosures while offering the chemical adsorption capability of our ductless fume hoods. The Type C enclosures provide effective operator protection from potential exposure to toxic powders, particulate, chemical fumes, and vapors. The AirSafe™ automatic safety controller constantly monitors airflow and filter conditions.
* HEPA/Carbon Ductless Polypropylene Balance Enclosure
* AirSafe™ automatic safety controller
* Horizontal laminar airflow pattern
* Chemically impervious construction
* Seamless design
* High mass - solid polypropylene construction
* HEPASafe™ filter change out
* Bonded carbon filtration
* Vapor-proof fluorescent lighting
* Optional dark blue base
* Optional disposal port for weighing containers
* No installation required
* Available in 36”, 48” and 72” widths
* 110V and 220V AC enclosure available
* Standard with fluorescent light and electrical cord access port (ACASLIP) slip hatch on each side
|
|
FEATURES
. Quiet operation, less than 50d(B)A and low power consumption.
. Portability of ductless fume cabinets enables their positioning in the optimum location, best for working and less walking around the laboratory thereby also substantially reducing risk from spillages etc.
. Filtration cabinets are safer for the environment, no pollution to the atmosphere, filters are removed and bagged for documented and accredited disposal.
. No ducting is required, therefore installation costs are kept to a minimum.
|
|
BIGNEAT manufactures enclosures for containment of robotics systems, for OPERATOR protection (LAOP) or PRODUCT protection (LAPP).
For bio-hazard and bio-protection we offer several cabinet types. LABS cabinets offer both OPERATOR and PRODUCT protection at levels of sterility and protection for most drug discovery applications. For more sensitive, or more hazardous applications Bigneat manufactures cabinets to Class II design, providing protection to the essential requirements of BS EN12469:2000.
The need for these types of enclosure is increasing because of the demand in the Pharmaceutical industry for rapid throughput and reliability of biologically sensitive processes and associated bio-hazards - Bigneat is Europe's Number 1 supplier of Robotics and Laboratory Automation enclosures.
Typical applications include for cell culture, cell screening, drug discovery, gene assays, high-throughput screening, rapid microbiological detection systems.
Special features of Biological Cabinets:
. Ducted or recirculatory filtration models available
. Excellent access for maintenance and servicing
. Emergency stop control
. Lighting and UV lamps included
Options:
. Electrical sockets
. Used tips chute
. Leaded acrylic for radiochemistry applications
|
|
BIGNEAT manufactures ducted or recirculatory cabinets for safe powder handling and weighing. These provide:
1. Excellent operator protection
2. Minimum maintenance
3. Stable 1 x 10-6g measurement
4. Excellent accessibility
The Range comprises XIT, XIT PLUS, EXCEL Safechange and EXCEL Plus cabinets and additionally we offer a bespoke fabrication service for your specialist applications.
Shown here XIT F3-XIT-S.
|
|
PROTECTION OF THE HANDLING
with an H 14 HEPA filter and a filtration efficiency of 99.999 %, particles of 0.3 microns or more can be retained.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
AN INCREASED HANDLING COMFORT
The work surface features a rounded edge for comfortable positionning of the arms during handlings.
A GOOD VISION OF THE HANDLING
An inclined front door and transparent sides increase the operator's vision comfort.
|
|
PROTECTION OF THE HANDLING
with an H 14 HEPA filter and a filtration efficiency of 99.999 %, particles of 0.3 microns or more can be retained.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
AN INCREASED HANDLING COMFORT
The work surface features a rounded edge for comfortable positionning of the arms during handlings.
A GOOD VISION OF THE HANDLING
An inclined front door and transparent sides increase the operator's vision comfort.
CORD TO STOP THE VENTILATION DURING THE WEIGHING
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
Bench Top & Cupboard Styles
Evaporation from drips and open containers contributes considerably to poor quality air within the laboratory. The Bigneat range of storage cabinets removes vapours, purifies the laboratory air and enhances the long-term health of laboratory personnel.
Main Features:
. Continually cleans up and purifies laboratory air.
. May be used when ducted extraction is unavailable.
. No outside exhaust necessary for vapours.
. Fully mobile, a simple electrical connection is all that is needed.
. Energy saving, cost effective & safe.
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
THE AIR OF THE LABORATORY IS PURIFIED
The air released by the filter contains 100 times less pollutants than the acceptable values defined by official authorities.
STANDARD EQUIPMENT :
•Electronic "fan failure" alarm for the continuous monitoring system of the ventilation.
•Sampling port for testing the saturation level of the filter.
VERY SILENT TURBINE FAN
Only 49 dBA
GOOD VISION OF THE STORAGE
Thanks to lockable transparent UV resistant door.
EASY TO SET-UP CLOSE TO THE USERS WORKSTATION
Does not require any ducting.
SPILL TRAY FILLED WITH AN ABSORBING MAT
To contain potential spill from broken containers.
|
|
|
An isolator can be manufactured in two different modes: in rigid or flexible material. We have designed an isolator with mixed material (plexiglas and transparent pvc) in order to allow both resistance and flexibility.
|
|
| ... products without technical information |
| |
The CEFEM dust SAFEBLOC ATEX is a cut-off and lock device intended to be used in areas with risk of explosion: zone 21 and 22, for dust "D", according to the EU directive 94/9/EC.
It complies with standards and regulations to ensure the safety of operators involved in the emergency break, the break for mechanical maintenance and the safety break beside any low-voltage circuit terminal.
They are composed of an IM switch disconnector, with a visible cut off, controlled by a right side handle, lockable by three padlocks on OFF position.
A position indicator (ON / OFF or I / O) allows you to view at one glance the position of the switch.
The cut-off system is clearly visible to the operator through a glass window triplex.
These 2mm thick boxes steel are very robust.
A double lock prohibits the opening of the door when the switch is ON and the closure of the switch when the door is open.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
All industries dust ATEX: zone 21 or 22
Cement, Mining, Quarrying, Steel, Paper, and Sugar.
|
|
Our guarding systems prevent entry to dangerous areas by restricting access to them. Where entry into the restricted area is required, sliding, swing or vertical doors can be integrated into the system. The arrangement of the system can be easily changed or modified if required to suit any change in conditions or place of installation.
mk not only produce railings stairways and platforms, we also develop workstations for the office, shop floor and assembly hall. Our modular systems are robust, long lasting, and adaptable to fulfil all ergonomic and functional requirements.
The mk guarding system brings low cost modular technology to an increasingly important area; employee safety.
mk Workstations
Flexible and cost effective work station solutions
Fully assembled or in a kit
Ergonomic adaptability
mk railings, stairs and platforms, bespoke solutions for individual customers
Clean, modern design with complete adaptability.
|
|
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise.
|
|
FlexLink offers a wide assortment of aluminum profiles and accessories such as connectors, fasteners, feet, etc to build machine frames and safety enclosures. Pre-assembled enclosure sections and sliding door profiles as well as linear units are also available.
Structural system XC (module 44 mm)
Structural system XC is based on aluminium beams with T-slots for easy interconnections and attachment of external devices. The system is based on the 44 mm module. Beam sizes in the XC system range from 24x24 mm up to 176x88 mm.
The system offers sturdy components which provide high load capacity for both static and linear motion systems. It is used within a wide range of applications, from frameworks, workbenches and enclosures to special machinery, pick and place units and gantry robots.
Structual system XF (module 30 mm)
Structual system XF consists of a range of standard components with emphasis on enclosure applications based on the 30 mm module. It includes two basic beam types, the support beams (XFBM) in cross-sectional dimensions 30 mm x 30 mm and 30 mm x 60 mm as well as several enclosure beams (XFEB) intended for enclosure frameworks. The system also includes other components for enclosures, including hinges, handles, strips for nets and panels, etc.
|
|
Need a special configuration, size, or color? It's easy to convert your specs to reality with customizable features from Zero Manufacturing. Our modified stock cases and complete custom designs represent the most diverse options for the optimal protection of your products.
Zero Manufacturing is the leading source for customizable commercial, industrial, and military cases. Offering over 100,000 pre-tooled sizes of deep drawn enclosures of virtually unlimited sizes and configurations, Zero's varied aluminum products can be customized and modified with processes such as drilling, laser cutting, riveting, welding, brazing and so much more. Custom accessories are also available for many of Zero's products to meet your individual requirements, contact us for more information.
|
|
MADE-TO-MEASURE TELESCOPIC COVERS
7000 types of protective covers already available
All models of covers, all brands of machines
Horizontal, vertical, rail, double axis protection…
Measurements carried out on machine or on model
Made-to-measure telescopic cover supplied in 4 weeks
12-month guarantee
RECONDITIONING SERVICE :
Our teams take over your current worn or even damaged cover and we guarantee complete reconditioning within 3 DAYS.
40 to 60% less expensive than purchasing a new cover Water-tightness,
Guiding, sizing, finishing…
Technical improvement of original cover Complete reconditioning in less than 1 week Minimum guarantee 6 months.
|
|
BUWW custom enclosures are engineered to our customer's specifications. Our proven design provides friction free doors hydraulically, pneumatically, or manually operated.
The doors are built with linear rail design or conventional roller design based on our
customer's requirements.
After taking into consideration the rigidity of the machine, the hinges, locks and fasteners are specially designed per our customer's specifications.
In addition, we have capabilities to provide an ergonomic design, soundproof walls, lighting and provisions for hydraulic hoses and electrical ductwork.
BUWW can provide many options, such as, cable runs, backwards compatibility, special holes, floor mounting, 2" or 4" acoustic panels, lighting fixtures, mist collection, various sizes, materials and finishes. Our enclosures are engineered with a small foot print and a large mounting space.
|
|
- Frame-machines
- Chassis/Housings
- Enclosures
- Latticed Protector
- Setting in conformity
- Ergonomics
- Various Supports
- The Council/Definition
- Study/plan CAD 3D
- Delivery in kit or turn-key
|
|
Realization to measure of frames and cartérisations of machines starting from the sections aluminum. By combination of basic elements, of connection on the ground and fixings of panels, it is possible to create the protections in conformity with the safety regulations standards or adapted to the specifications of the users.
Possibility of carrying out doors beating, sliding, or guillotines with electric safety or not.
Delivery in kit or assembly.
|
|
|
|
see the results for the following category
