|
|
|
|
|
|
The laboratory hotplates and stirrers from SI Analytics demonstrate the kind of creative design that results when practical laboratory experience is paired with the most advanced materials know-how.
Our variety of 4 laboratory hotplates enables speedy heating up (SLK 1, SLK 2), with a temperature control if required (SLK 2-T, SLK 6).
The laboratory stirrer (SLR) is the optimum solution for a careful to intense mixing of liquids. It can also be used for speedy heating up or controlled temperature adaptation.
Both product families have the benefits of the glass ceramic heating surface which as proven in millions of households. Chemical resistance, a high sur face quality, and a resistance to temperature shocks of more than 700 °C provide the user with maximum benefits compared to conventional heating surface materials. The poreless smooth surface enables even most stubborn dirt to be easily removed. The high infrared permeability ensures that the heating energy is transferred quickly and with a low loss rate, i.e. it heats liquids faster than other heating surface materials, and thus saves energy.
|
|
|
|
|
|
Stuart CB/SB162 Hotplate stirrers
Choice of robust aluminium or chemically resistant ceramic tops
Advanced safety features:
- Flashing "Hot" warning light
- Spillproof design
- Independent safety circuit to protect against overheating
Microprocessor control for accurate temperature setting
Stylish and economical general purpose stirrer hotplates designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.
Model CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.
Model SB162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate.
Fitting for retort rod and supplied with 2 x 25mm PTFE coated stir bars.
|
|
Extremely flat electronic multipoint magnetic stirrer without moving parts.
For the flexible use in the laboratory.
HMC Cyclone 6
- Electronic multipoint magnetic stirrer with 6 stirring points
- Extremely flat without moving parts
- Microprocessor-controlled
- Elegant design with stainless-steel housing
- 6 synchronically working stirring points, for example 6 x 1 litre Erlenmeyer flasks
- Ideal device for mass screenings
- Speed range 100-1000 rpm
- Hermetically sealed
- Simple operation
- Indestructible
|
|
| ... products without technical information |
| |
|
Plant and mechanical engineers are responsible for ensuring personal safety. The machine safety products of elobau range from sensors and evaluation units for small machines to bus components for large plants. The personnel of elobau GmbH offers support with the implementation of the latest safety guidelines in particular the SIL accreditation.
|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline fitting and provides environmental protection up to 80°C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They provide up to 2NC 1NO circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
|
|
The Idemag WPR Non Contact Interlock Switch range offers a robust wide fitting and provides environmental protection up to 80C. They are suitable for high pressure hosing (IP66/67) and are resistant to many organic and non organic chemicals.
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, and a high tolerance to guard misalignment.They are designed to fit to medium to large guards.
They offer 2NC high power (up to 2A.) circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1. An auxiliary signalling contact is available. The high power components and de-rating with an internal fuse mean they may be suitable for use in lower risk applications (subject to a risk assessment for the application).
|
|
The Hygiemag WMR Magnetic Non Contact Interlock Switches offer a wide industry robust fitting and provides environmental protection up to 105°C.
The housings are fully Stainless Steel 316 with mirror polished finish and they are designed to cope with the rigours of CIP and SIP cleaning in food processing industries. (IP69K High Pressure Chemical Cleaning).
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, provides up to 2NC 1NO power circuits (up to 2A.) and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
Features:
Fully Stainless Steel 316 housings
Mirror polished finish
High Mechanical Life
IP69K enclosure protection - High Temperature Cleaning
Wide robust fitting - 30mm wide
M12 Flying Lead connector versions
|
|
|
The industry's most complete line of contact and non-contact products. GE Security Industrial safety interlock switches are used to detect the opening of guards-including doors, gates and/or removable covers-that prevent access to dangerous parts of a machine, and to help deter tampering with the guards or the internal machine controls. As with all GE Security Industrial 300-BT products, the safety interlock switches are in full compliance with the most current and required standards. These include IMQ, CE, VDE, UL, CSA, IEC, EN and Semi S2 standards.
|
|
|
|
|
|
SAFETY CODED MAGNETIC SENSOR, SR series
Pizzato Elettrica extends its range of safety magnetic sensors by introducing the SR A series which distinguishes itself from the SR B series in the reduced dimensions.
Both series are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
- Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
- Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
- Centering mark on the housing as a reference for the operating distances
- Possibility of connection in series more sensors also with mechanical switches.
- Actuation from two different directions.
- Available with cable or M8 integrated connector.
- Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit the web-site www.pizzato.com
|
|
Idemag - Magnetic Non Compact - Type MPR
Compact yet robust fitting suitable for all small guard applications. Can be mounted unobtrusively in channels or behind doors - left or right cable exit Hygienic screw cap covers ensure suitability for Food Processing washdown Cost effective interlock solution Wide sensing at 12mm and high tolerance to misalignment High current switching capability to 0.5A. 2NC 1NO circuits - up to EN 954-1 Cat.4 with Safety Relay
Part No Type Cable Length Circuits
114001 MPR Cable Right 2M 2NC
114002 MPR Cable Right 5M 2NC
114003 MPR Cable Right 10M 2NC
114004 MPR Cable Right QC-M12 2NC
114005 MPR Cable Right 2M 2NC 1NO
114006 MPR Cable Right 5M 2NC 1NO
114007 MPR Cable Right 10M 2NC 1NO
114008 MPR Cable Right QC-M12 2NC 1NO
114009 MPR Cable Left 2M 2NC
|
|
Magnetic switches produced by elobau are based on reed- or hall-technology.
Customised solutions based on the standard program are possible.
The magnetic switches are also available with safety function according to the IEC/DIN EN 61508 (SIL) and DIN EN ISO 13849-1 (PL) standards.
|
|
Along with the mechanically operated limit switches, magnetic reed switches (magnetically operated) have been constantly gaining increased importance. They can be regarded as a complement to the plunger, roller and turret head operated limit switches and as an important addition to electronic proximity switches.
|
|
magnetic switches for general applications heat-resistant magnetic switches
- normally open, normally closed, change-over contact, bistable as well
- high vibration resistance
- LED indicator
- special designs on request
- heat-resistant versions
|
|
Solenoids work dead and react to a permanent magnet. The special characteristics are characterised by large switching distances and outstanding price achievement relationship.
Function possibilities
- Large selection of materials
- Single switch functions
- Active switch-distances up to 60 mm
- Simple installation
- Needs no current supply
- Up to 250°C woring temperature
- Switching function normaly open and change over contacts
- Maintenance free
|
|
| ... products without technical information |
| |
|
|
|
|
The laboratory hotplates and stirrers from SI Analytics demonstrate the kind of creative design that results when practical laboratory experience is paired with the most advanced materials know-how.
Our variety of 4 laboratory hotplates enables speedy heating up (SLK 1, SLK 2), with a temperature control if required (SLK 2-T, SLK 6).
The laboratory stirrer (SLR) is the optimum solution for a careful to intense mixing of liquids. It can also be used for speedy heating up or controlled temperature adaptation.
Both product families have the benefits of the glass ceramic heating surface which as proven in millions of households. Chemical resistance, a high sur face quality, and a resistance to temperature shocks of more than 700 °C provide the user with maximum benefits compared to conventional heating surface materials. The poreless smooth surface enables even most stubborn dirt to be easily removed. The high infrared permeability ensures that the heating energy is transferred quickly and with a low loss rate, i.e. it heats liquids faster than other heating surface materials, and thus saves energy.
|
|
|
|
|
|
Stuart CB/SB162 Hotplate stirrers
Choice of robust aluminium or chemically resistant ceramic tops
Advanced safety features:
- Flashing "Hot" warning light
- Spillproof design
- Independent safety circuit to protect against overheating
Microprocessor control for accurate temperature setting
Stylish and economical general purpose stirrer hotplates designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.
Model CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.
Model SB162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate.
Fitting for retort rod and supplied with 2 x 25mm PTFE coated stir bars.
|
|
Extremely flat electronic multipoint magnetic stirrer without moving parts.
For the flexible use in the laboratory.
HMC Cyclone 6
- Electronic multipoint magnetic stirrer with 6 stirring points
- Extremely flat without moving parts
- Microprocessor-controlled
- Elegant design with stainless-steel housing
- 6 synchronically working stirring points, for example 6 x 1 litre Erlenmeyer flasks
- Ideal device for mass screenings
- Speed range 100-1000 rpm
- Hermetically sealed
- Simple operation
- Indestructible
|
|
| ... products without technical information |
| |
 see the results for the following category : Screw pumps |
|
|
